Quicksilver 822777Q1 alumīnija apdares cilnes anods Mercury vai Mariner piekarināmajiem motoriem un MerCruiser pakaļgala piedziņām, kurās izmanto augstas grābekļa dzenskrūves, nav norādīts

Brand:‎Quicksilver

3.5/5

60.97

Lietojumiem, kur nepieciešama papildu atstarpe augsta grābekļa dzenskrūvēm. Piemērots lielākajai daļai Mercury/Mariner piekarināmo dzinēju ar 35 ZS un vairāk, 1995. gada un jaunākiem Force 90 ZS un 120 ZS piekarināmajiem motoriem, kā arī visiem MerCruiser diskdziņiem. Aizsargājiet savu piekaramo un pakaļgala piedziņu no galvaniskās korozijas kaitīgās ietekmes, vienlaikus palīdzot vadīt stūres vadību. Pārbaudiet katru gadu un viegli nomaināms ar aparatūru, kas iekļauta anodā. Zīmols Quicksilver ir līderis bezkompromisa dzinēju eļļu, detaļu un piederumu piegādē kuģniecības nozarei vairāk nekā 65 gadus. Quicksilver ir galvenais Mercury Marine Original Equipment rezerves dzinēju detaļu, eļļu un piederumu piegādātājs, kā arī strādā, lai apkalpotu visus oriģinālā aprīkojuma zīmolus jūras un spēka sporta nozarēs. Tas ir izpelnījies lojālus sekotājus, nodrošinot augstākās kvalitātes produktus, kas tiek pārbaudīti, izmantojot dažas no visstingrākajām vidēm un testēšanas procedūrām. Neviens pēcpārdošanas uzņēmums nesasniedz tādu pētniecības un dizaina līmeni kā Quicksilver; Quicksilver pirkšana nozīmē veiktspēju, aizsardzību un sirdsmieru.

Ražots, lai atbilstu Mercury Marine oriģinālā aprīkojuma ražotāja specifikācijām, lai vislabāk aizsargātu jūsu Mercury Mariner vai Force piekarināmo motoru. Šie lietie alumīnija anodi atbilst vai pārsniedz mil-spec MIL-A-24779(SH), nodrošinot ilgāku aizsardzību nekā cinka anodi, un ir paredzēti lietošanai saldūdenī vai sālsūdenī. Periodiski pārbaudiet anodus, lai nodrošinātu vislabāko aizsardzību, un nomainiet, ja redzat korozijas vai bedrīšu pazīmes, lai samazinātu uzturēšanas izmaksas. Katrs anods ir paredzēts ātrai un vienkāršai nomaiņai ar parastajiem instrumentiem, atceroties pārbaudīt dzenskrūves atstarpi pirms ekspluatācijas. Lietojumiem, kur nepieciešama papildu atstarpe augsta grābekļa dzenskrūvēm. Piemērots lielākajai daļai Mercury/Mariner piekarināmo dzinēju ar 35 ZS un vairāk, 1995. gada un jaunākiem Force 90 ZS un 120 ZS piekarināmajiem motoriem, kā arī visiem MerCruiser diskdziņiem. Palīdz aizsargāt pārnesumu korpusa korpusu no korozijas, jo tas nodrošina hidrodinamisko apgriešanas spēku jūsu piekaramajam bortam un pakaļgala piedziņai, lai atvieglotu stūrēšanu.
Brand Name ‎Quicksilver
Color ‎Unspecified
Country of Origin ‎Venezuela
Customer Reviews 4.5 4.5 out of 5 stars 438 ratings 4.5 out of 5 stars
Fishing Technique ‎Spinning, Casting
Included Components ‎Anode
Item Dimensions LxWxH ‎7.75 x 6.67 x 4 inches
Item Package Dimensions L x W x H ‎6.8 x 5.8 x 3.3 inches
Manufacturer ‎Quicksilver
Material ‎Various Materials
Model Name ‎822777Q1 Aluminum Trim Tab Anode - Mercury or Mariner Outboards and MerCruiser Stern Drives Using High Rake Propellers
Number of Items ‎1
Package Weight ‎0.36 Kilograms
Part Number ‎822777Q1
Size ‎Unspecified
Suggested Users ‎Boat Engine Parts and Accessories

3.5

13 Review
5 Star
74
4 Star
12
3 Star
6
2 Star
2
1 Star
7

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: jim
Its beuatiful
Scritto da: wyatt
Finally I found it somewhere
I dont know why but I was unable to find this at my local marine store. Glad I was able to find it online. I needed a trim tab anode that was both set back (for prop clearance) and full length (for added stability) and this item fit the bill! I tried using a flat anode but had too much torque steer, I tried using a set back trim anode but it didnt have enough material to combat the torque steer. This product was the answer, both set back and full size. Installed on my Mercruiser Alpha 1 Gen 2 outdrive. It came with the bolt with thread locker already on it. Only problem is that it only comes in aluminum so I had to swap out the rest of my anodes from zinc to aluminum.
Scritto da: Alan Bailey
Nice
Exactly what I ordered, exactly what I needed. Very high quality.
Scritto da: SG
Quicksilver for the win once again.
Excellent purchase! Looks better quality than OEM. This was fitted to a 1998 Mercury V6 150 and only modification I had to do was grind off a little material for clearance of my rear bolt through my housing which is mainly due to the reason that I run a lower unit extension plate because I swap out prop and jet pump from summer to winter times. Same day shipping was available and would buy again.
Scritto da: John
Well made
Like most things from quicksilver this is another quality product
Scritto da: Ron
Easy to install and if you have a slow speed wander on your runabout, this helps a lot!
We have a 2050 Sea Ray bow rider that really likes to wander at slow speeds. Irritating when in channels with lots of boats or at multiple launch ramps. We went from a 3 blade to a 4 blade and that helped along with this skeg. The original trim tab was flat, no fin, so this helped. We haven't tried off setting it yet, it seems to me on our other boats they were always offset instead of straight out the back. Time will tell as I fool around with it.
Scritto da: Stephen G Cox
Had a flat anode and switched to this to improve slow speed prop walk.
My sterndrive bowrider has the absolute worst slowspeed prop walk. Its a struggle to point straight in a no wake zone. This season, I went after the problem... I replaced the 21 pitch SS 3 blade prop with an alum 21 ptch 4 blade prop and put this finned anode on the sterndrive in place of the stock flat one. PROBLEM SOLVED! It was a combination of replacing both the anode and the prop that addressed the issue to a satisfactory level. The 4 blade prop required this offset fin anode. All sterndrives walk at no wake speeds, but now its manageable.
Scritto da: David Walker
Did exactly what it was supposed to do. Had ...
Did exactly what it was supposed to do. Had purchased a new prop, that, while it was the listed size for my boat, it hit the old trim tab. In further reading the directions, there was a note on mercury outboards, that if the prop hit the trim tab, buy this one. I did, it worked, what more can be said about an anode? Fit my '83 Merc 80hp. Likely fits several other years as well
Scritto da: roscoe
Alpha 1
1990 alpha 1 leg fit good
Scritto da: Amazon Customer
fin
great product
Scritto da: Shawn
Exactly what i was expecting
Fit my Alpha 1 leg and made room for the 4 blade prop
Scritto da: andre
bien
parfait pour corriger
Scritto da: Dan
????
Exactly as expected, fast shipping

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array