Red Devil 08090I RD PRO 100% karstumizturīgs RTV silikona hermētiķis, ūdensnecaurlaidīga un laikapstākļu necaurlaidīga līme izmantošanai augstā temperatūrā, 10,1 unce. Caurule, sarkana, 12 pac. 12 pac. 10,1 oz

Brand:Red Devil

3.5/5

418.51

LABĀKO REZULTĀTU LAI: Pirms hermētiķa uzklāšanas noņemiet visus vecos blīvējumus, gružus vai citus atlikumus, kas varētu traucēt adhēziju, un pārliecinieties, ka RTV Sealant tiek lietots uz tīras, sausas virsmas, lai iegūtu labākos rezultātus. 50 GADU PRODUKTA IZTURĪBAS GARANTIJA: izmantojiet Red Devil's Heat Resistant 100% silikona hermētiķi saviem projektiem, kas attiecas uz ārkārtēju karstumu; hermētiķis paliek elastīgs un iztur vibrāciju ar iespaidīgu adhēziju un nodrošina ūdensizturīgu blīvējumu, kas ir izturīgs 50 gadus. NEPLĀSINĀS, NESARAUKSIES UN NELOOS: ar savu nelīstošo dizainu, ūdensizturīgo un laikapstākļu necaurlaidīgo formulu RTV hermētiķis izturēs elementus un neplaisās, nelobīsies un nesarausies, nodrošinot uzticamu blīvējumu, kas kalpo gadiem ilgi. IZTURĪS ĀRĒJAI KARTUMA IEDARBĪBAI: RD Pro Industrial Grade karstumizturīgais hermētiķis ir veidots ar dzelzs oksīdu, lai izturētu ārkārtēju karstuma iedarbību, un iztur 600 grādu pēc Fārenheita (intermitējoša) un 500 grādu pēc Fārenheita (pastāvīga) temperatūru. SARKANA KRĀSA VIEGLAI IDENTIFIKĀCIJAI: Ideāli piemērots izmantošanai rūpniecībā, karstumizturīgais hermētiķis ir sarkanā krāsā, un to var izmantot uz cepeškrāsns siksnām, rūpnieciskajām krāsnīm, krāsns logiem, žāvēšanas krāsnīm, katliem, sildītājiem, atlokiem, cauruļu savienojumiem, piekļuves durvīm, apkurei. Iekārtu elementi un gāzes iekārtu dūmvadi.

LABĀKO REZULTĀTU LAI: Pirms hermētiķa uzklāšanas noņemiet visus vecos blīvējumus, gružus vai citus atlikumus, kas varētu traucēt adhēziju, un pārliecinieties, ka RTV Sealant tiek lietots uz tīras, sausas virsmas, lai iegūtu labākos rezultātus. 50 GADU PRODUKTA IZTURĪBAS GARANTIJA: izmantojiet Red Devil's Heat Resistant 100% silikona hermētiķi saviem projektiem, kas attiecas uz ārkārtēju karstumu; hermētiķis paliek elastīgs un iztur vibrāciju ar iespaidīgu adhēziju un nodrošina ūdensizturīgu blīvējumu, kas ir izturīgs 50 gadus. NEPLĀSINĀS, NESARAUKSIES UN NELOOS: ar savu nelīstošo dizainu, ūdensizturīgo un laikapstākļu necaurlaidīgo formulu RTV hermētiķis izturēs elementus un neplaisās, nelobīsies un nesarausies, nodrošinot uzticamu blīvējumu, kas kalpo gadiem ilgi. IZTURĪS ĀRĒJAI KARTUMA IEDARBĪBAI: RD Pro Industrial Grade karstumizturīgais hermētiķis ir veidots ar dzelzs oksīdu, lai izturētu ārkārtēju karstuma iedarbību, un iztur 600 grādu pēc Fārenheita (intermitējoša) un 500 grādu pēc Fārenheita (pastāvīga) temperatūru. SARKANA KRĀSA VIEGLAI IDENTIFIKĀCIJAI: Ideāli piemērots izmantošanai rūpniecībā, karstumizturīgais hermētiķis ir sarkanā krāsā, un to var izmantot uz cepeškrāsns siksnām, rūpnieciskajām krāsnīm, krāsns logiem, žāvēšanas krāsnīm, katliem, sildītājiem, atlokiem, cauruļu savienojumiem, piekļuves durvīm, apkurei. Iekārtu elementi un gāzes iekārtu dūmvadi.
Brand Red Devil
Color Red
Item Weight 10.1 Ounces
Material Silicone
Style 10.1 oz

3.5

8 Review
5 Star
72
4 Star
12
3 Star
10
2 Star
2
1 Star
4

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Aiden
Did it's job well
Needed it to temporarily seal an exhaust flange after replacing the front pipe. Mating surface on existing center pipe was corroded badly, and I couldn't get a seal. This did the trick while I waited for a new center pipe to arrive.
Scritto da: Oleg Simakoff
Perfect for tough jobs
Nothing else I tried from Lowe's or home Depot worked. This did the job! I need to glue the ceramic cooktop to the metal stove frame. I'd say my only issue is that the color is red. Other than that minor thing, I am very happy with the outcome
Scritto da: Mortimer
Good stuff
So far so good. I used this to re-attach a piece of stone veneer very near the face of my fireplace, was concerned that due to the heat other glues wouldn't stand up. During this time of year, we have the fireplace going pretty much 100% of the time. I have a thermometer on the blower grate and it often reaches close to 400 degrees; the brick I needed to attach was only a few inches away from the grate. I let the fire die down, squirted a couple blobs on the back of the brick and stuck it on. It's tacky enough the brick held itself in place while drying. Been over a week now and it's still attached firmly and we've had the fireplace going 24/7. It works! **Update 4 months later** Still holding strong! We have had the fireplace cooking non-stop since I put this stuff on. No signs of loosening up at all. **Update 3 years later** Bricks adhered with this stuff are still stuck on, it's awesome. I just came here to order another tube for a different brick that fell and thought I would update this review.
Scritto da: Amazon Adam
High performance seal for furnace inducer fan!
Purchased this to fix and create a new seal for a furnace inducer fan assembly. The fan assembly is the heart of the furnace in order to get it up and running. I replaced the inducer fan as the bearings were done. I used this product to create a tight seal to prevent the carbon monoxide and other fumes from entering the basement. In addition to a gasket, I used this to seal the base of the inducer fan assembly to prevent it from leaking anything. The product is the best and withstands 500 degrees temperature. A must for anyone working with a furnace or hot surface that requires additional seal protection.
Scritto da: Lulu1953
Strong easy to use
The glass on my induction eye slide off, instead of buying another. It is better then the one I originally bought!
Scritto da: milleeran
Barely withstood 400° after curing for a week
I am sure it has its applications 600° is not one of them
Scritto da: Ot
Its Caulking
Was very fluid, made it easy to apply, to motor heads.
Scritto da: SoNatStone
Great high temp adhesion, slight off-gas at first burn
I used this to adhere and fiber-cement surround to a zero-clearance direct vent fireplace, seems to be working just fine after several uses. The only issue is we noticed a smell that resembled a hot engine bay during the first couple times we ran the unit after using this product. It hasn't completely gone away, but it is lessening with time. Totally worth it though for the working temp range of the product.

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array