Stens New OEM rezerves josta 265-211 Savietojams ar Cub Cadet RZT42 un RZT50, MTD RZT50VT un RZT54 754-04043, 754-04043A, 754-04043B, 754-04043B, 954-04043B, 954-04043B, 954-4040 43B

Brand:Stens

3.7/5

50.64

**Pirms iegādes pārbaudiet, vai daļa ir piemērota** Specifikācijas: Apraksts: OEM rezerves siksnas siksna Pielietojums: Piedziņas siksnas tips: Pārsegts Garums: 57 3/4Platums: 1/2Iepakojuma veids: Zīmola uzmava Aizstāj OEM numurus: Cub Cadet: 754-045443, 743443 -04043B, 954-04043, 954-04043A, 954-04043BMTD: 754-04043, 754-04043A, 754-04043B, 954-04043, 954-04043, 954-04043, 954-040. Paredzēts: Cub Cadet: RZT42 un RZT50MTD: RZT42, RZT50, RZT50VT un RZT54

Nav pieejama neviena vienība
Profesionāli izplatītāji uzticas Stens zīmola detaļām, lai veiktu OEM kvalitātes remontdarbus. Stens vārds ir norādīts uz visiem oriģinālajiem Stens izstrādājumu iepakojumiem. Stens 1 gada garantija nodrošina katras daļas uzticamību un veiktspēju. Mēs esam pārliecināti, ka mūsu produkti darbosies nevainojami, taču retos gadījumos, kad tas nedarbojas, mēs tos nomainīsim jebkurā laikā viena gada laikā pēc pasūtījuma. Savietojams ar/maiņai: Cub Cadet: RZT42 un RZT50, MTD: RZT42, RZT50, RZT50VT un RZT54. Aizstāj OEM numurus: Cub Cadet: 754-04043, 754-04043A, 754-04043B, 954-04043, 954-04043A, 954-04043B, MTD: 754-04043B, MTD: 754-04043B, 754-04043B,4045-40 , 954-04043, 954 -04043A, 954-04043B. Specifikācijas: Apraksts: OEM rezerves siksna, jostas pielietojums: piedziņa, jostas tips: pārklāts, garums: 57 3/4, platums: 1/2, iepakojuma veids: zīmola uzmava.
Country of Origin USA
Customer Reviews 4.6 4.6 out of 5 stars 306 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer No
Item model number 265-211
Item Weight 6.4 ounces
Manufacturer Stens
Product Dimensions 13 x 4 x 2 inches

3.7

9 Review
5 Star
78
4 Star
15
3 Star
3
2 Star
1
1 Star
3

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: JIM
Fit good.
Fast delivery, fit good.
Scritto da: RAT
Fit Cub Cadet RZT-50 perfectly
It was not as easy to install as I would have liked, not as a fault of the belt. Since I could not free the belt drive pulley bolt I ended up pulling the 4 engine to deck bolts, slid the engine forward ,& rocked it a bit to install the new belt past the drive belt cluch assy stop. It worked. Oh, I did have to pull the muffler to do that as well. Wasn't all that bad.
Scritto da: superman
great product.
fits and works very well on my mower.
Scritto da: Dennis
Decent belt at good price
Bought this belt as I trusted Stens. Belt looks nice. Have run it for about 10 hours or so with no problems. This type of belt is not easy to install. No fault of the belt, just the location on the mower where it must go. The belt itself went on fine. It is the right size.
Scritto da: john masseria
On 3rd cut of 2 acre property no slipping previous belt from tractor supply lasted 3 cuts
Used on cub cadet rzt 50 drive belt not mower deck
Scritto da: B. Mosch
Belt is too long for ZT-54 mower and will not last long
I bought this for our White (same as MTD or Cub Cadet) 54" zero-turn model ZT-54 made in 2008. Put it on the mower in January or February, and in July it was shredded and broke. I had noticed over the last couple months that the idler pulley looked out of line and at an angle, but turns out that the idler pulley is fine. The real problem was that this Stens belt was a little longer than the stock belt which allowed the idler pulley to move too far and hit against a bolt that is on the mount plate above. The idler pulley mounting arm was forced downward by jumping over the bolt above, so the idler pulley was pushed downward and at an incline. That angle and position of the pulley was extreme enough that it finally destroyed the belt after only 4-5 months of use. You can test your idler pulley situation to see if you'll have the same problem before ordering this. Take the drive belt off of one of the wheel drive pulleys so it lets the idler pulley move as far as it wants to go on its own. Use your hand to push the idler pulley outward (takes a bit of force), and slowly let it go back to its resting position. If the same bolt is in the way as mine has, you will notice the pulley gets kicked downward to get past the bolt (you might even have to pull it downward slightly to get it to jump over it). If yours does this, do not order this belt. I'm going to see if I can find a real MTD belt or one even a 1/2" shorter from stock.
Scritto da: Judy
Belt fit perfectly,
Belt fit perfectly and you don't need to pull the clutch off to install it. I bought a diffrent brand from someone that was supposed to fit but didn't...great buy here....
Scritto da: 1 Sweet Ol Bear
same as OEM
Brigg and Stratton owns STENs so the products seem to be just as good at less cost..
Scritto da: Adam Penny
Exactly as described
Exactly as described and a great fit for my cub cadet rzt

Saistītie produkti

hot
Briggs & Stratton 491912 karburators
4.1/5

€ 307.03

Briggs & Stratton 491912 karburators
4.1/5

€ 307.03

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array