TapeCase 423-3 UHMW lentes rullis – 3 collas X 108 pēdas čīkstēšanu mazinoša lente ar augstas lipīguma akrila līmi. Berzes samazināšanas lentes 36 jardi 3 collas caurspīdīgas 1

Brand:TapeCase

3.4/5

170.30

TapeCase 423-3 UHMW nodilumizturīgā lente ir pašeļļojoša līme, kas ir saderīga ar krāsotiem metāliem, kā arī plastmasām. Augstas saķeres līmlente nodrošina efektīvu veiktspēju, lai kontrolētu čīkstēšanu un grabēšanu, ko izraisa metāla vai plastmasas materiālu berze. Šī akrila līmlente ir vēlama izvēle ražošanas, automobiļu un izplatīšanas nozarēs trieciendilumam un slīdēšanas lietojumiem. Šī lente piedāvā arī berzi mazinošus, skaņu slāpējošus un nodilumizturīgus lietojumus mājsaimniecības un rūpnieciskos apstākļos. Plānajai akrila lentei nav nepieciešama apkope, taču tā ir izturīgāka nekā PTFE lentes.

Specifikācijas: lieljaudas lentes ruļļa izmēri ir 3 collas platumā un 108 pēdas garumā, un tam ir 0,005 collu bieza lente. Ilgmūžība: šī berzes noturīgā lente nodrošina ilgstošu savienojumu rūpnieciskai un vispārējai lietošanai. Zema apkopes nepieciešamība čīkstēšanu mazinošā lente kalpo ilgāk nekā PTFE lentes gadījumos, kad eļļošana nav iespējama. Pielietojums: šī akrila līmlente nodrošina izcilu adhēziju un spēcīgas saites, lai aizsargātu metāla teknes, gofrētās kastes, konveijerus un vadošās sliedes. Augstas līmlentes lenti izmanto ražošanas, izplatīšanas un automobiļu rūpniecībā. Squeak Reduction: skaņu slāpējošā lente pielīp pie normālām un piesārņotām metāla, koka vai plastmasas virsmām neatkarīgi no tā, vai tās ir vienkāršas vai krāsotas. Tas palīdz samazināt čīkstēšanu un grabēšanu, ko izraisa vibrācija vai metālu nodilums. Polietilēna lente: nodilumizturīga lente ir izstrādāta, lai radītu slīdēšanas plaknes efektu, kas ļauj saskarties ar virsmu bez nodiluma. Lentes pamatne nodrošina vienmērīgu kustību bez berzes.
Brand TapeCase
Color Translucent
Item model number 3-36-423-3
Manufacturer TapeCase
Material Polyethylene, Acrylic
Number of Items 1
Product Dimensions 5.25 x 5.25 x 3 inches; 0.18 Ounces
Special Feature Strong

3.4

13 Review
5 Star
66
4 Star
16
3 Star
8
2 Star
3
1 Star
6

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Homeplate Ump
Now I can slide my EZ chair
I just moved to a new place with faux wood flooring in the living room (vinyl covered flooring). My old favorite swivel arm chair has a metal circular base, and NO WAY will it slide or budge an inch over this new vinyl flooring. So I invested in a roll if this "slick" tape and took 15 minutes to tightly wrap the entire metal circular base of the chair just like the handle of a baseball bat (like we used to do as kids when we taped our new wood bats). Now the chair can be slid across the floor just like it's on real smooth natural wood. Very happy with the 7 bucks spent!
Scritto da: M. Welk
Needed this for Slideing tape.
I have used reinforced heat resistant Teflon tape before , that works good but is often thicker than need. This tape is not thick , the thickness is more like a primo packaging tape. I could have used a slightly thicker one, but this will make a better sliding surface without changing things much. I used it on a wood-on-wood drawer , and it solved the problem, the drawer now slides easier and no longer damages the surfaces. The adhesion is good enough to peel the photo finish off , and still allowed for some lift and reset positioning prior to pressing it down. Looks like it would also be removable. Adhesion is a great balance.
Scritto da: C. Pinkney
Great surface for computer mouse feet
Roll seems small for 15ft, but the tape I got is thin, so I’m trusting it is that length. In any case this low friction tape makes for a great resurfacing of computer mouse feet. I just stuck it on the existing feet on both a Logitech and Apple mouse and then used a very sharp craft knife to carefully cut around the feet to remove the excess. The knife has to be really sharp as this stuff is quite tough. Seems to stick well and has less friction than the original mice feet even when new, which is good. Better and cheaper than buying model specific feet and only took a few minutes to cut out. Even if they eventually wear down or unstick I have plenty of tape left to make more.
Scritto da: Ragnar
Works well
As advertised.
Scritto da: gbyoung
An 18mm width IS NOT 1/2" like its supposed to be.
Kinda miffed at the (IMHO) bogus advertising. Haven't tried it yet, so we'll see if it works..... especially for the price of the stuff.
Scritto da: LewisT
Drawer slide use
I have a older chest of drawers that the drawers slide wood on wood. This was very annoying to open and you had to drag the drawers. Installing this tape made the drawers slide effortless. Definitely recommend.
Scritto da: John M. Wong
Good low friction tape
Good grease-less solution for eliminating friction and wear between sliding parts.
Scritto da: mike king
Tape was of good quality and works well for my application.
Tape was of good quality and works well for my application. Fast shipping and tracking info was fast and up to date. A+
Scritto da: Ian Terry
Solved a problem - worth the cost
This could be thought of as the world's most expensive sticky tape, but it solved a problem of sticky wooden drawers (redwood runners on a redwood cabinet frame.) It transformed the performance of the drawers giving a smooth opening and closing with no stickiness. The traditional remedy of candle wax don't compare with this high-tech tape which sticks securely and has the appearance of being very durable. I'll get back to you in ten years with a progress report :-)
Scritto da: Mr. Justin Evans
My BMW 3 series had a frustrating squeak caused by ...
My BMW 3 series had a frustrating squeak caused by the felt on the top of the doors rubbing against the door frame when the car was slightly less than perfectly clean. Installed this and the squeak has gone away completely transforming my car. I've had it in place now for a month and it's still as new.
Scritto da: Fraser
Not Flat
This tape was not flat off the roll. One side was stretched , came off the roll puckered. The tape wasn't rolled up flat on the reel or it wasn't packed properly. Maybe stored in a poor environment, too hot. I was slicing it thinner to get 4 - 7/64" strips 8" long, had to use up 6' to get something usable. I suggest you look for something better than this tape for a low friction surface.
Scritto da: JMJR
A good value for low-friction tape
I mistakenly ordered this tape thinking it was anti-slip tape due to the "high tack" line in the description, only to realize it was low-friction tape. I will still come up with uses for it such as wood working jigs and tool fences.
Scritto da: CNC Guy
Great product!
Used this tape to get rid of an unpleasant sound in my sliding blinds. Worked out really well.

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array