Terases sildītājs, EAST OAK 50 000 BTU āra terases sildītājs ar galda dizainu, nerūsējošā tērauda deglis, trīskāršā aizsardzības sistēma, riteņi, āra sildītājs komerciālām un dzīvojamajām telpām, 2022. gada jauninājums, bronzas bronzas sildītājs

Name: Terases sildītājs, EAST OAK 50 000 BTU āra terases sildītājs ar galda dizainu, nerūsējošā tērauda deglis, trīskāršā aizsardzības sistēma, riteņi, āra sildītājs komerciālām un dzīvojamajām telpām, 2022. gada jauninājums, bronzas bronzas sildītājs
Brand: EAST OAK
SKU: 0860007276309
Price: 514.30 EUR
Availability: InStock

Brand:EAST OAK

3.6/5

€
514.30

PRODUKTA APRAKSTS Piezīme-terašu sildītājs ir paredzēts lietošanai tikai ārā.-𝗢𝗻 𝗿𝗮𝗶𝗻𝘆 𝗱𝗮𝘆𝘀, 𝗶𝘁 𝗺𝗲𝗻𝗱𝗲𝗱 𝘁𝗼 𝘂𝘀𝗲 𝗶𝘁.𝗪𝗵𝗲𝗻 🌿 𝗲𝗰𝗼𝗺𝗺𝗲𝗻𝗱𝗲𝗱 𝘁𝗼 𝘂𝘀𝗲 𝗮 𝗲𝗿.-𝗪𝗲 𝗿𝗲𝗰𝗼𝗺𝗺𝗲𝗻𝗱 𝗯𝘂𝘆𝗶𝗻𝗗 𝗿𝗼𝗱𝘂𝗰𝘁 𝗳𝗼𝗿 𝗮 𝗯𝗲𝘁𝘁𝗲𝗿 𝗽𝗿𝗼𝗱𝘂𝗰 𝗲𝘅𝗽𝗲𝗿𝗶❗ Atstarotājs — alumīnija deglis — 304 nerūsējošā tērauda stabs, tvertne, Pamatne - gludeklis ar cinka apdrukuIzmērs un svars Preces izmērs - 33x18x88 collas Iepakojumā - 18,1x18,1x30,3 collas N.W - 35,2 mārciņas G.W - 39,6 lbsReflektors - 32 collasTvertne - 14,9x18x25x18,8x2 caurums - dia.5.1nchŠļūtene - 59inch RAŽOTĀJS KONTAKTINFORMĀCIJA 1-833-EAST-OAK (ASV) 1-833-327-8625 no pirmdienas līdz piektdienai: 9:00–17:00 PST/PDT

Summa

Pievienot grozam Pērc tagad

EAN: 0860007276309

Kategorijas Dzīvoklis, zāliens un dārzs, āra apkure un dzesēšana, dārza sildītāji,

𝟯-𝗬𝗲𝗮𝗿 𝗖𝘂𝘀𝘁𝗼𝗺𝗲𝗿 𝗦𝘂𝗽𝗽𝗼𝗿𝘁 - Mēs sniedzam 3 gadu defektu garantiju klientu atbalstam un kalpošanas laiku. 𝗨𝗽𝗴𝗿𝗮𝗱𝗲𝗱 𝗗𝗲𝘀𝗶𝗴𝗻 𝗳𝗼𝗿 🌸 trīs brīvas enkurojošās sviras, bet arī četri caurumi papildu ūdens kastei, lai piesietu, nodrošinot dubultu svērtu stabilitāti. (ūdens kaste nav iekļauta) Ūdens kaste tiek pārdota atsevišķi. 𝗘𝗮𝘀𝘆 𝘁𝗼 𝗔𝘀𝘀𝗲𝗺𝗯𝗹𝗲 𝗮𝗻𝗱 𝘃𝗲 - Dažas detaļas tiek samontētas iepriekš. Vienkārši izpildiet norādījumus, un jūs varat pabeigt instalēšanu aptuveni 40 minūšu laikā. Un tajā ietilpst divi riteņi vienmērīgai mobilitātei. 𝗦𝗶𝗺𝗽𝗹𝗲 𝗜𝗴𝗻𝗶𝘁𝗶𝗼𝗻 𝗦𝘆𝘀𝘁𝗲𝗺 𝗮𝗯𝗹𝗲 𝗧𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲 𝗞𝗻𝗼𝗯 - viena pieskāriena aizdedzes sistēma ļauj operatoram iedegt sildītāju, nospiežot pogu. Turklāt ar regulēšanas vadības pogu var regulēt zemu vai augstu siltumu vai izslēgt āra terases sildītāju. Jūs varat izbaudīt terases sildītāju, izvēloties dažādus apkures režīmus. 𝗔𝗱𝘃𝗮𝗻𝗰𝗲𝗱 𝗧𝗶𝗽-𝗼𝘃𝗲𝗿 𝗮𝗻𝗱 𝗳𝗲𝘁𝘆 𝗣❗ Turklāt mūsu propāna terases sildītāji piedāvā trīskāršu drošības aizsardzības sistēmu, kas nodrošina jūsu labsajūtu. Ar sasvēršanās drošības automātiskās slēgvārsta aizsardzību, ja liesma tiek nejauši nodzēsta, gāzes avots izslēgsies. Tas viss nodrošina aizsardzību pret anoksiju un dempingu. 𝗥𝗼𝘂𝗻𝗱 𝗧𝗮𝗯𝗹𝗲 𝗣𝗮𝘁𝗲𝗻𝘁 s, tālruņus vai citas mazas lietas. 𝟯𝟬𝟰 𝗦𝘁𝗮𝗶𝗻𝗹𝗲𝘀𝘀 𝗦𝘁𝗲𝗲𝗹 𝗗𝗼𝗝 𝗲𝗮𝘁𝗶𝗻𝗴 - Mēs atbalstām augstas kvalitātes 304 nerūsējošā tērauda izmantošanu mūsu dubultā pārklājuma sildīšanas sieta dizainā. Salīdzinot ar tradicionālajiem terases sildītājiem, mūsu sildītāji ir izturīgāki, izturīgāki un drošāki. 𝟱𝟬,𝟬𝟬𝟬 𝗕𝗧𝗨 𝗣𝗮𝘁𝗶𝗼 𝗛𝗲𝗯 sildīšanas pozīcija. Ar ETL sertifikātu, ideāli piemērots āra un komerciālai lietošanai, to var novietot pagalmos, āra bāros, restorānos utt. Apkures segums: 18 pēdas.

Brand	EAST OAK
Burner type	Propane
Color	Bronze
Country of Origin	China
Customer Reviews	4.5 4.5 out of 5 stars 2,187 ratings 4.5 out of 5 stars
Form Factor	Round Table Design
Heat Output	50000 British Thermal Units
Heating Coverage	18-foot
Heating Method	Radiant
Indoor/Outdoor Usage	Outdoor
Item model number	EO-PH001
Item Weight	35.2 Pounds
Manufacturer	EAST OAK
Mounting Type	No
Power Source	Gas Powered
Product Dimensions	33 x 18 x 87 inches
Product Dimensions	33"D x 18"W x 87"H
Recommended Uses For Product	Outdoor
Room Type	Patio
Special Feature	50,000 BTU, Wheels, 304 Double-Layer Stainless Steel Burner, Triple Protection System

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: LLLyons

Works great! Excellent Customer Service!!

We just got this and put it together this morning. It was packed really well, so we were surprised to see two large dents in the main cover, as well as small scratches/marks on the top or table portion. We don’t know if someone ordered this before, it got damaged, and they returned it OR … It got damaged in shipping, despite the packaging and no visible box damage. Regardless … We have been working on our yard for two years and weren’t in the mood to return. My husband got his rubber mallet and beat the dents out as best he could. It’s noticeable, but we turned it on, and it works great, so it is what it is. UPDATE to 5 STARS: Sorry for the delay in writing this updated review. Two weeks after my review posted, East Oak reached out about our experience. Without hesitation, they offered to send us a new base cover. We've been very busy, so we haven't installed it yet, but it arrived in perfect condition. We did not contact East Oak, so they had no obligation to reach out to us. Clearly, they care about the quality of their products and how their customers receive and perceive them. I truly believe the damage was done in shipping and had nothing to do with the company, but they didn't hesitate to send us a replacement anyway. They are awesome!!

Scritto da: LTG

Great Customer Service

I bought this heater in January and didn’t unpack and assemble until March. The pilot light would light but turning it up from there and the burner would just sputter. One time I got a normal flame but it wouldn’t get very warm and never made the screen glow. I contacted customer service at East Oak and they requested a short video and then a couple photos of specific parts. Once they had those, they immediately sent a new replacement heater. The new one works great!

Scritto da: PacMan

Decent Heat and Looks Nice but Assembly presented issues.

Overall, pleased with the first purchase and therefore purchased a 2nd one w/caveats. Second Purchase…Assembly: would have been rather easy to assemble if the parts provided were quality controlled…Upper Post and Lower Post did not connect properly as the lower post is warped…wrote to support and standing by for replacements or recommendations. Protective Film: Not sure why they choose to use this film; it’s not easy to remove and personally, I don’t think it’s needed…would reduce the assembly time tremendously without it. Heat output is ample if cold and not very windy. Rather easy and straight forward to light and use once set up.

Scritto da: Clint Koenig

Looks Great, Heat-Meh... Oh Yeah, I Had to Perform Surgery to Put it Together

First off, it looks great, but whoever wrote the directions didn't actually put one together. I looked at the directions and automatically switched to step 2 first, which is put the main housing onto the base and bottom weight. That way I had a stable base to work with. The first step had you putting the burner assembly on top of the main body, but it would have been awkward to work with when I got to step 2. Got to the third step where you put the emitter (mesh thing around the burner), TOTAL FAIL. The top of the emitter was SUPPOSED to have three holes where you put the spacers between the emitter and the dome. Guess what, no holes, WTF! How the heck did that get by their "quality control". So, there I was in my garage trying to center the emitter onto the dome and mark the holes. Punching, drilling, three different bits later and finally got three somewhat properly placed holes in the top of the emitter. The rest was pretty easy. So, most of the reviews said it took 45 minutes to two hours to put together. No wonder. It's a massive failure if you have to take a drill to a product to get it assembled. Once together, it worked as expected, but don't believe that it'll throw off tons of heat. Also pay careful attention to the getting it lit and leaving it on the low setting for a few minutes. If you try to light it too quick, you'll hear a whooshing noise, because the burners didn't light completely. It's like lighting your stove and the flame takes its time getting to all the orifices, but there's always that one stubborn one. I found that if there's a slight breeze, just slowly rotate the heater till all the orifices get lit. Would I recommend this? Sure, but have expectations. FOLLOW-UP: East Oak contacted me about my review and my experiences. After a few traded emails, this company very generously compensated me for my exhaustive whining I did in my review. They sought me out after a purchase to try and make it right. This is something that they did not have to do, so kudos to East Oak for their customer service efforts and thanks to Colin for reaching out to me. Colin also told me they contacted their manufacturing team to correct the missing holes in the emitter. I'll be raising my star level to 4 based on customer service.

Scritto da: Jan Phillips-Clar

Exemplary Customer Service

I purchased 6 outdoor heaters. 2 of the pyramids and 4 of the 50,000 BTUs. We live by the ocean and need to frequently replace things due to the salt air rusty items.. 1st of all, the 50,000 BTUs put out an incredibly great amount of heat. They work as well as heaters that we have paid 3 to 4 Xs the amount. 2nd- I was extremely happy with how good they looked. Super easy to assemble. The downside is the protective cover they use- took as long to remove as the entire thing took to assemble. 3rd, customer service was exemplary. One of the heaters had some minor issues but they sent replacement parts within 2 days of my inquiry. super fast response- no hassle. VERY HAPPY WiTH MY PURCHASE. Would definitely recommend and will purchase more when needed.

Scritto da: yellow lab owner

It heats well, easy to start, Optional Cover fits and protects well

Well packed. Assembled easily ...maybe 30-45 minutes. Adequate instructions. Hardware well organized with spares for screws/huts. Works well, starts easily and has good range of heating adjustment. I bought the optional cover and it helps keep the heater clean and dry. You will need to supply a standard 5 Gal LPG tank.

Scritto da: Debra S.

Heats very well.

The day we got this, we were able to put it together with some ease and were able to use it since we actually had a cold day. We have it in an enclosed screened patio against a wall. We had a very gusty day and it blew over. Since it’s aluminum, it dented the top edge. We now have it weighted down more. We’d still recommend it just make sure you account for it being top heavy (we don’t keep the tank side it when not in use).