Topeak Mini MasterBlaster DX velosipēda sūknis , G x P x A 23,1 x 4,7 x 3,2 cm / 9,1 x 1,9 x 1,3 collas

Brand:Topeak

3.5/5

56.14

Alumīnija mucas un īkšķa slēdzene. Divkāršās darbības sūknēšana. SmartHead. 150 g / 0,33 mārciņas. 150 g / 0,33 mārciņas

Nav pieejama neviena vienība
Alumīnija mucas un īkšķa slēdzene. Divkāršās darbības sūknēšana. SmartHead. 150 g / 0,33 mārciņas. 150 g / 0,33 mārciņas
Brand Topeak
Color Null
Item Dimensions LxWxH 13 x 4.15 x 3.05 inches
Item Weight 0.3 Pounds
Material Aluminum

3.5

9 Review
5 Star
75
4 Star
9
3 Star
4
2 Star
6
1 Star
7

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Katherine Hollis
Smart
This was a must have for me since I have presta and Schrader tubes. You don’t need to change anything on the pump to go from one style to the other.
Scritto da: Mike Someone
Improved
I had an old version of this pump. It was great until the inflation head unscrewed during a ride and fell apart on the trail never to find the parts again. This new pump is very similar except the head of the pump is secured in a holster to prevent falling apart from vibrations during riding. I have not used it yet, but I know when It is needed the pump will be in one piece.
Scritto da: Sixstrings
Works great
This is a neat little pump. Very lightweight works great. Not sure how long it's going to last. It has a dual pump action. Fits nicely along the frame.
Scritto da: Joseph
Great Emergency Pump
Years ago, after some bad experiences with CO2 I went full time carrying a mini-pump. A mini-pump is in my rear pocket kit on every ride. Lately I've been doing more long distance 'gravel grinders'. Last week had a blowout a couple miles from the finish. I reached into my pocket...NO PUMP! It must have popped out somewhere over the last 50 miles of dirt roads. After hiking to the finish, I decided it was time to get a dedicated pump for this bike. I have a Topeak Master Blaster in my commuter backpack. Based on reputation, this pump was ordered. Mounting the pump on the bike's bottle boss was easy. It does not contact the frame or interfere with grabbing a bottle. The mount has a strap and cap built into the mount that protects the pump head. It should be secure and rattle free regardless of the surface. I let the air out of a tire to test pump's efficiency. Inflating a 700x32 tire to about 65lbs took about 90 strokes. As with most mini-pumps, it requires a bit more effort near the end. Because it's a dual action pump the same effort is needed on both the push and pull. Hopefully I won't have to use this too often, but it's like buying insurance, it will be there when I need it.
Scritto da: Chiubacca
Nice little bike pump
This is a nice little bike pump that will get the job done during an unexpected flat/repair. Of course it won't get high-pressured tires up to the 100-120 psi range, but it'll be enough for you to ride back home. It's quite sturdy in construction and the dual-head feature means that you do not need to change the configuration to use between a presta or schrader valve head. It is small and pretty lightweight and the utility clamp is compatible with a water bottle cage. My only complaint is that the pump clamps onto your bike upside down and if you wear certain long-pants, it tends to catch onto the lever and either only it just enough that it'll pop back into position with each revolution or open completely and still catch your pants, both of which are quite a nuisance. I've seen other models that have the pump upright so the lever is pointing downwards and which would eliminate this issue. The holder for the pump gives you a little leeway and you can try to move it more outwards, away from the water bottle cage. If it doesn't help, you may just need to wrap it with something, essentially making the entire surface "flush" to avoid catching with the part that otherwise sticks out. It would get 5 stars otherwise.
Scritto da: J. Martinez
Great Road Pump
Arrived early and perfect for topping-off your tires while out riding so as not waste a CO2 unless it's a total- tube change. Thanks, TX Bike!
Scritto da: ohsolomia
Good pump
Hefty, Good double action pump with good pressure capacity and clamping on Presta and Schrader without fiddling. Gets skinny tires hard enough , and not too tedious on large volume MB tires. Has held up with regular use. You can fab a flex tube extension from an old Presta valve and pump hose and end, that de-stresses the connection to the valve stem and makes it have a tube between the pump and valve stem like the Morph. ? what is the o-ring on the shaft (seen in the picture here and at Topeak). does it keep dirt out or keep the pump closed? just seems to be in the way and bind. The frame mount isn't an inspiration, but if it was, I would leave it on the wrong bike or get it stolen. Hey, I gotta carry a tube and tar arns anyway.
Scritto da: Michael nettles
A very good value and a quality pump
Really good pump. Inflates tires fast. The nozzle automatically converts from Schrader to presto but the harness juts out at the frame and my pants leg often get caught on it. One day I forgot to put the pump in it my pants leg caught it and broke it off.
Scritto da: Hessam kh
Heavier than my expectation
Great product. Heavier than my expectation

Saistītie produkti

hot
Topeak Roadie DA Mini Pump Melns
3.6/5

€ 55.68

Topeak Roadie DA Mini Pump Melns
3.6/5

€ 55.68

hot
RaceRocket HP
3.6/5

€ 74.47

RaceRocket HP
3.6/5

€ 74.47

hot

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array