Tovolo 80-4555C Ledus veidnes, saldumu veidotāji, 6 komplekts, oranžs

Name: Tovolo 80-4555C Ledus veidnes, saldumu veidotāji, 6 komplekts, oranžs
Brand: Tovolo
SKU: 0874376004555
Price: 40.85 EUR
Availability: InStock

Brand:Tovolo

3.4/5

€
40.85

Esiet vēss ar šīm Groovy Ice Pop veidnēm no Tovolo. Pagatavojiet sev saldumu, kas atgādina saldējuma mašīnu, taču dariet to, neizejot no mājām. Šīs smalkās ledus formas veido klasisko formu, kas atgādina siltās vasaras pēcpusdienas un saldējuma mašīnas saldo skaņu. Dalieties šajās atmiņās ar saviem mīļajiem, baudot mājās gatavotu saldētu našķi. Vienkārši ielejiet maisījumu veidnēs un sasaldējiet, lai iegūtu visvienkāršāko un burvīgāko pēcpusdienas uzkodu. Izturīgā pamatne neļodzās un neapgāžas saldētavā, nodrošinot minimālus traucējumus sasaldēšanas laikā. Plastmasas veidnes droši iekļaujas pamatnes ieliktņos, lai sasalšanas laikā paliktņi būtu vertikāli. Kad tas ir sasaldēts, atsevišķas veidnes var noņemt no pamatnes, lai atvieglotu sasalušo ledus izņemšanu no veidnes. Palaidiet veidni zem silta ūdens, lai vieglāk atbrīvotu. Sajauciet un saskaņojiet savas iecienītākās augļu sulas, jogurtu, augļu un dārzeņu biezeni, smūtiju pārpalikumus, saldējumu un daudz ko citu, lai katru reizi iegūtu unikālus gardumus. Sajauciet iecienītākās garšu kombinācijas, pēc tam ielejiet šķidrumu veidnēs, kas ieliktas pamatnē. Kad tas ir piepildīts, viegli ievietojiet kociņus šķidrumā un sasaldējiet, līdz tas ir ciets. Katrā veidnē ir 4 šķidruma unces. Samaziniet lipīgo roku un sulas zudumu ar šiem unikālajiem rokturiem, kas aizsargā pret pilieniem. Pamatne izveido nelielu bļodu ap centrālo nūju, kas savāc visus pilienus no kūstošā ledus. Pilienu aizsargs sasalšanas laikā nospiežas pār plastmasas veidni, tāpēc ledus bļoda vienmēr atrodas bļodā, lai saldētais ēdiens būtu bez netīrības. Izgatavots no plastmasas, kas nesatur BPA. Var mazgāt trauku mazgājamā mašīnā.

Nav pieejama neviena vienība

EAN: 0874376004555

Kategorijas Mājoklis un virtuve, Virtuve un ēdamistaba, Kirtuves piederumi un sīkrīki, Speciālie instrumenti un ierīces, Leda Pops Formas,

IZMĒRI UN APKOPE: 7,75 L X 4,75 W X 7,25 A; mazgājams trauku mazgājamajā mašīnā vieglai tīrīšanai. Izgatavots no plastmasas, kas nesatur BPA. SAGATAVOJIET DAŽĀDU SALDĒTU kārumu: sajauciet un saskaņojiet savas iecienītākās garšas, lai iegūtu unikālus gardumus. Uzmanīgi ievietojiet atkārtoti lietojamos kociņus šķidrumā un sasaldējiet, līdz tie kļūst cieti. Katrā veidnē ir 4 šķidruma unces. Pirms baudīšanas palaist veidni zem silta ūdens. PAMATNE SALDĒŠANAS LAIKĀ UZTUR POPUS STARPUS: Plastmasas veidnes droši iekļaujas pamatnes ieliktņos, lai paliktņi stāvus sasalšanas laikā. Izturīgā pamatne neļodzās un neapgāžas saldētavā, nodrošinot minimālus traucējumus sasaldēšanas laikā. UNIKĀLS PILIENAIZSARDZĪBAS ROKTURIS: Samaziniet pielipušos rokas ar unikāliem pret pilieniem aizsargājošiem rokturiem. Pamatne izveido nelielu bļodu ap centrālo nūju, savācot pilienus no kūstošā ledus. Pilienu aizsargs sasalst pāri plastmasas veidnei, lai novērstu izšļakstījumus. IZVEIDOJIET MĀJĀS GALVENUS LEDUS: šīs raķešu ledus veidnes rada klasisku formu, kas atgādina siltas vasaras pēcpusdienas un saldu gardumu dalīšanu ar draugu. Vienkārši ielejiet maisījumu veidnēs, sasaldējiet un dalieties ar visu laiku labāko pēcpusdienas uzkodu.

Brand	Tovolo
Color	Orange
Country of Origin	China
Customer Reviews	4.4 4.4 out of 5 stars 207 ratings 4.4 out of 5 stars
Department	Home & Kitchen
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	7.31 x 4.5 x 1.37 inches
Item model number	80-4555P
Item Weight	0.31 Pounds
Item Weight	5 ounces
Manufacturer	Spectrum Diversified Designs
Material	Plastic
Material Type Free	BPA Free
Number of Pieces	1
Product Dimensions	7.31 x 4.5 x 1.37 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: nicholas bryan

Perfect if your kids love Popsicles

My son wants to eat popsicles every single day, so I got these molds to make healthier homemade ones. Easy to use and the little stand works well to keep them upright in the freezer. We ran the frozen molds under hot water a minute or two and our popsicles came out perfect little rocket ships! The biggest challenge is preventing my kid from losing the little orange sticks. Love these popsicle molds

Scritto da: Jenn_19

popsicle mold

My kids always want popsicles. In an effort to cut some junk out of our diet I decided to start making our own from 100% juices. These molds are great because they are made from safer plastics so I am not concerned, as much, about dangerous chemicals leaching into our stuff. I like that each mold is seperate allowing us to always have popsicles ready. As soon as one kid finishes, the mold and stick get placed in the dishwasher (hooray for dw safe stuff!) and is refilled and placed back in the stand. No need to wait for them all to be gone to make more! I was sceptical about the stand but it has proven to be steady. I can place them in there and walk to the freezer without them spilling. Our freezer is a bottom pull out one and they don't spill or knock over even when the kids pulls really hard. The design is fun and the popsicles slide out easily after being held under running water for a few seconds. My son threw a popsicle to his brother who didn't catch it and the stick broke off the base but that's been our only problem in 5 months use. I do, however, feel they are a little pricey but it's nice knowing what my kids are eating and I'm sure we saved as much as they cost in a month's time.

Scritto da: Annelise

Great overall with a few minor flaws

My 2-year-old and I both like these home-made popsicles. The mold is much sturdier than it appears in the picture and stands up easily in the freezer. Our freezer is fairly full but this doesn't take up too much space. I find that the base on the end of the stick prevents quite a bit of spilling compared to store-bought popsicles--though we still eat them outside, baths/laundry aren't necessary afterwards. My one complaint is that the popsicle stick is too long to easily eat the bottom part of the popsicle, even for an adult. You can't really slide the popsicle up the stick as you might with a wooden stick. In the rocket shape mold, the bottom is quite a bit bigger than the top, so we end up wasting a little more than I like. You also have to be very careful not to overfill them--I kind of wish there was a fill line on the mold, because I keep just barely overdoing it and end up with juice to clean up on the stand. But overall, I really like this mold. The shape is fun and it even came with a few good recipes to try.

Scritto da: SW

Possible eye poker!

Hard to fill. However it maybe the pour spout I had :/ . What I didn't like.is that the lids did not hold tight as liquid is in frozen. It needs to be frozen with them on the base so liquid did not leak or make mess. Once frozen pops can be removed from base and stored in another area of freezer. Also to note, we made frozen ice coffee, to bite the "icecream" off the stick could like you in eye. Glasses may be needed. :)

Scritto da: Samudra

Not Quite Perfect, But Better Than the Alternatives I've Been Able To Find

I still wish I could make the individual triangle-shaped popsicles my mother made in aluminum molds with a rubber gasket where the wooden stick went in; she filled the mold flat, and when the popsicle was frozen she's just run a little water on the backside, wiggle the stick, and the popsicle would pop out intact. No need for drip catchers: she handed me my popsicle and a napkin at the same time, and that took care of it! So for decades I've searched for molds that make INDIVIDUAL popsicles, like those, and these (and their friends here on Amazon) are the first I've found. They do the job. They can be filled and emptied individually. They're cute. They're a LITTLE hard to remove from the mold-- plastic versus aluminum? – but not too bad. They sit rather awkwardly in the freezer. They're better than anything else I've found, but they're still not as good as Mama's molds, and I'm still looking. As for the popsicles? Mama filled the molds with apricot nectar. Yum!

Scritto da: Krystal Hackett

Very fun and easy to use. Great buy.

These are awesome! I've bought others in the past that we cheaper but didn't freeze well. These were easy to use. I followed a recipe that came with the molds. I made some dairy free fudge pops with frozen fruit blended. They came out great. My son loves them. They don't take very long to freeze. It actually took only a couple hours to freeze. They came out fairly easy after running under warm water as suggested. They are very cute and my son loves the rocket ship design. Fun and easy to use. Would definitely recommend these. Great buy.

Scritto da: Immel Family

Great popsicles, but they do leak

These popsicle molds are great and with a little warm water run on the outside they come out with no problems at all. I do have one beef though. They claim that the holder makes it so it doesn't spill on you.......well, trust me, it does and actually makes it worse than the ones that only have the stick. At least with the stick handle kind you can cover your bases and get the drips with your mouth. The cup at the end prevents you from doing this and when you tilt it to go in your mouth all the drips that accumulated in the cup go all over your shirt. Maybe I will have to leave more space than it says at the end so I can still get my tongue under the rocket bottom to catch the drips before they accumulate. Still a great popsicle mold and just the right size for adults or kids. Not too big, not too small...just right.

Scritto da: Diane January

Sturdy molds

I chose this rocket shape because it was reminiscent of the popsicles I had when I was a kid, though not done up as fancy as this one. The Tovolo molds are my first experience with popsicle molds, and I am extremely pleased with each and every set I've bought so far. They are very sturdy, the plastic is not flimsy, and the trays do not take up a lot of room in my freezer. I have a freezer with adjustable shelves, and all three trays (6 popsicles each) will fit on one shelf. The popsicle is easy to remove in spite of the shape. I find the drip tray helpful, as I'd rather remove bits of fallen popsicle from the tray than from my blouse! I don't worry about drips because my popsicles don't stick around long enough to melt; however, this would be a large popsicle for a little kid.

Scritto da: PBok

Okay but

They are a little top heavy for small children. If you use half the volume, then it is more manageable. Kind of cute shape, easy for little ones to such on. I'd recommend, for sure.

Scritto da: Jay Glow

Brilliant rockets

My daughter and I have been through many lolly molds. These are great because they stand up on their own which means we can keep the tray in the freezer and fill the moulds up easily on our kitchen counter. The lids fit on well and they fit into the tray well. It's quite hard to remove the lollies from the mold but we just fill a jug with hot water and rest the lolly in the water for a few minutes. Comes out easily then.

Scritto da: Wesley

No complaints

These meet all expectations. Let them sit in hot water for about a minute to remove your popsicle. The shape makes cleaning a little more of a task, but overall would happily recommend to a buyer.

Scritto da: Melissa

Perfect rocket popsicles

The perfect popsicle mold! Love the way you can take out individual popsicles instead of the whole pack. They come out easily with the shape intact. No need for a more expensive option!

Scritto da: Carol Hughes

Good quality

These are very good value for the cost...the materials are good quality. My grand children love the 'spaceship fruit pops '. I would highly recommend this product.