Trend C019AX1/4TC Craft Pro 1/4 collu kāts volframa karbīda taisnais frēzes griezēja uzgaļa diametrs 12,7 mm griešanas garums 50 mm 1/2 kāts

Name: Trend C019AX1/4TC Craft Pro 1/4 collu kāts volframa karbīda taisnais frēzes griezēja uzgaļa diametrs 12,7 mm griešanas garums 50 mm 1/2 kāts
Brand: TREND
SKU: 5027654031353
Price: 37.71 EUR
Availability: InStock

Brand:TREND

3.7/5

€
37.71

C019AX1/4TC no Trend ir ideāls frēzes griezējs lietošanai ar Trend Hinge džigiem HINGE/JIG/A un HINGE. Ar augstas kvalitātes konstrukciju, ilgu kalpošanas laiku un konsekventu veiktspēju šim taisnajam maršrutētāja piederumam ir 1/4 collas kāts, lai jūs varētu to izmantot daudzos esošajos maršrutētājos, lai pilnveidotu jebkuru projektu, pie kura jums jāstrādā.

Summa

Pievienot grozam Pērc tagad

EAN: 5027654031353

Kategorijas Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Routeru daļas un piederumi, Router Bits, Iztaisnotie, Spirālveida un apdares uzgaļi, Prieki,

IZMĒRI: garums - 71 mm kombinezons ar īpaši garu 1/4 collu kātu; Diametrs - 12 mm; Griešanas garums - 19 mm. DROŠA PRAKSES: Ietver iegravētu “K” atzīmes indikatoru uz kāta, lai nodrošinātu pareizu ievietošanas dziļumu, nodrošinot drošu darba praksi un pareizu darbību. PIELIETOJUMS: Izmantot uz skujkoku, cietkoksnes, MDF, saplākšņa un skaidu plātnes. VOLFRAMA KARbīds: Katram griezējam ir masīvas volframa karbīda griešanas malas, lai uzlabotu veiktspēju un izturību masīvkokos un abrazīvos lokšņu materiālos, tostarp slānī un MDF. IZCILA VĒRTĪBA: augstas kvalitātes maršrutētāja piederums ar ilgu kalpošanas laiku un nemainīgu veiktspēju.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	TREND
Country of Origin	‎Taiwan
Customer Reviews	4.7 4.7 out of 5 stars 1,753 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎LOCK/JIG/B
Item Package Quantity	‎1
Item Weight	0.05 Pounds
Item Weight	‎0.8 ounces
Manufacturer	‎TREND
Material	Tungsten carbide
Material	‎Tungsten carbide
Number Of Pieces	‎1
Part Number	‎C019AX1/4TC
Product Dimensions	‎1.98 x 4.14 x 0.36 inches
Size	Diameter 12.7mm Cutting Length 50mm
Size	‎Diameter 12.7mm Cutting Length 50mm
Style	‎1/2" Shank

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Stevie B

Excellent

The product was as described, did copious amounts of slot cutting without any loss of performance.

Scritto da: Jon

dead sharp, accurate quality cutter - perfect for cutting a rabbet to fit guitar/ukulele binding

I needed a top-notch cutter in a table mounted application to trim accurate rebates all around the edges of the body on my home build ukulele project, ready to take the wooden binding strips that protect the edges and give a nice decorative touch. The same technique applies to binding on acoustic guitars. The bottom and side cut combined were of interest as I new this would mean there was less risk of damage. As the top is made of spruce which is very soft and tears easily, it's crucial the cutter is sharp, especially as parts of the cut will be going "against" the grain if you follow me. I've heard sad stories of people getting this far in the build only to have the instrument damaged at this step... After much trepidation and careful set up, this cutter made light work of the task in hand and cut perfect edges all the way round - using a climb cut technique to go with the rotation of the cutter on the bits where the grain was oriented in such a way as to risk tear out, and then a conventional cut against the rotation on the rest of it. Zero problems whatsoever. Just the right tool for the job, and worth every penny.

Scritto da: Ryan Carter

Brilliant. Like the kind of router bit James Bond would use.

Just a wonderfully well made, balanced, quiet, accurate and powerful router bit. Sliced through some very very hard and knotty old oak like a noiseless laser. Great stuff from a great maker - everything I’ve ever bought from Trend reinforces their brand to me.

Scritto da: G

Confusing description

While this cutter is very good quality, the description is confusing and not quite the size I want but did the job with a bit more work

Scritto da: Mr. B. Revill

Good value

Does the job great.