VEVOR dimanta serdes urbis, 5/127 mm diametra urbis, 14/355 mm betona serdes urbis, 5/8-11 vītnes urbis, sausā/slapjā urbjmašīna ar asmeni, dimanta mitrā urbjmašīna betona ķieģeļiem 5 collu

Name: VEVOR dimanta serdes urbis, 5/127 mm diametra urbis, 14/355 mm betona serdes urbis, 5/8-11 vītnes urbis, sausā/slapjā urbjmašīna ar asmeni, dimanta mitrā urbjmašīna betona ķieģeļiem 5 collu
Brand: VEVOR
SKU: 0810087872342
Price: 100.77 EUR
Availability: InStock

Brand:VEVOR

3.2/5

€
100.77

Šis profesionālais dimanta urbis ar zāģa asmeni ir augstfrekvences metināts, nodrošinot ātru un tīru urbi. Universālā vītne 5/8-11 ir piemērota vairākām mašīnām, uzklāj uz betona un ķieģeļiem. Galvenās iezīmes Augstākās kvalitātes dimanta materiāls Galvasurbis ir izgatavots no augstas kvalitātes dimanta un alumīnija sakausējuma. Izvēlētā dimanta un augstfrekvences metināšanas tehnoloģija var nodrošināt ilgāku darba mūžu. 5/8-11 universālā vītne 5/8 universālā vītne ir saderīga ar lielāko daļu iekārtu. Sējmašīnu var uzstādīt uz daudzveidīgas iekārtas. Ātrs šķembu noņemšanas līdzeklis Šie serdes urbji ir aprīkoti ar dzesēšanas šķembu noņēmēju ātrai skaidu noņemšanai. Rezultātā samaziniet troksni un uzlabojiet darba efektivitāti. Stabila koncentriskā vārpsta Trīs vienā koncentriskā vārpstas konstrukcijā var nodrošināt stabilu darbību un ātru urbšanu, kas ir efektīvāka nekā parasta caurumu urbjmašīna. Zobu augstfrekvences metināšana Betona caurumu zāģa zāģa zobi ir metināti ar augstfrekvences palīdzību, zobains dizains ir asāks un nodilumizturīgāks. Plaša lietošana Dimanta urbumu zāģis ir paredzēts cieta betona, mūra, cieto ķieģeļu un citu cietu materiālu urbšanai. Specifikācijas Modelis: KZ5 Materiāls: Dimanta un alumīnija sakausējuma uzgaļa diametrs: 5 collas / 127 mm Noderīgais garums: 14 collas / 355 mm Kopējais garums: 15,7 collas / 400 mm Adapteris: 5/8 collas-11 Vienuma svars: 13 lbs / 5 kg. Saturs 1 x dimanta serdeņa urbis 1 x asmens

Nav pieejama neviena vienība

EAN: 0810087872342

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Elektrourbju daļas un piederumi, Griezes urbji, urbji Uzgaļi,

Daudzpusīgs pielietojums: mūsu betona urbjmašīna ir paredzēta betona, sarkano ķieģeļu, marmora un citu materiālu urbšanai tādos apstākļos kā gaisa kondicionētāju, cauruļu, kāpņu margu, lielceļu un lidostu uc uzstādīšana. Vienkārša darbība: urbjmašīnu var izmanto gan sausai, gan mitrai, lai apmierinātu jūsu darba vajadzības. Sāciet urbšanu vertikālā stāvoklī un turpiniet rakt dziļi. Nedaudz ūdens var pagarināt kalpošanas laiku. Humanizēta struktūra: mūsu dimanta mitrās serdes uzgalim ir skaidu noņemšanas caurumi, ļoti regulāri zāģa zobi un koncentriskas asis. Novatoriskais dizains nodrošina augstu urbšanas veiktspēju, vienlaikus saglabājot ilgu kalpošanas laiku. Izstrādāts precīzai montāžai: ar universālo vītni 5/8-11, šis serdes urbis ļauj viegli un ātri uzstādīt standarta fiksēto serdi vai rokas urbjmašīnu. Tas ir piemērots arī dažādām ierīcēm. Efektīva un vienmērīga urbšana: šī dimanta serdeņa urbjmašīna sastāv no augstākās kvalitātes alumīnija sakausējuma sastāvdaļām, un augstas kvalitātes dimanta graudi nodrošina ilgāku serdes kalpošanas laiku. Diametrs: 5/127mm, Noderīgais garums: 14”/355mm.

Brand	VEVOR
Country of Origin	China
Item Dimensions LxWxH	18.3 x 6.1 x 5.9 inches
Item model number	COREDRILL5
Manufacturer	VEVOR
Material	Metal
Minimum Bore Diameter	5 Inches
Product Dimensions	18.3 x 6.1 x 5.9 inches; 8 Pounds
Tool Flute Type	Concentric

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Tunaoue

Heavy Cylindrical Boring

The media could not be loaded. Had to bore a breather hole for tankless water heater through 8” of solid concrete. Drilling horizontally about eye-level, this is a heavy boring tool, difficult to handle, so I built a wood fixture to help target and hold the weight. I think the bit can be used wet or dry, in my case dry cutting was my only option. Lot of DUST, so wear a breather mask and eye protection. I wore ear plugs too because it was an enclosed shed. The task took a week, about 20-25 hours of actual powering (slowly) through about an inch per day. If the drill angle is a tiny bit off, the whole thing BINDS UP and stalls the drill. I could stand and push the drill with my back leg braced agains the rear wall for maybe 10 minutes at a time before I succumbed to the fatigue. Rest for 5 - 10 minutes, and resume the attack. You’ll need patience and persistence because (in my case) it was literally a long, . . . hard, . . . grind. If your project is straight down into a concrete floor, your results will probably be more efficient.

Scritto da: Demon Camber

Got the job done

The diamond isn't as coarse as I would like but it got the job done. Didn't have a proper water attachment but keep the cutting area under a constant spray. An sds plus was used. I did not have a drill only mode and could only do the job on the two highest speeds with medium pressure

Scritto da: george

Very good

Good for couple of jobs. definitely is worth for DIY projects

Scritto da: armando bustamante

Skeptical at first..

This is an awsome core drill, i was skeptical at first, because of some bad reviews i saw. But this thing went thru a foot of rock wall with no issues. Bit is still intact,all teeth are good. Would definitely recommend it.

Scritto da: Rob Quartermain

Absolute junk

If you look at the photos that pretty much tells the story, I actually tried to use it, and it was absolutely worthless. I had to make a template to even start to use it because it jumped all over the place, probably because of those pieces of welding, slag whatever that is on 3 of the cutters I would not recommend this thing is definitely going back very unhappy big waste of time.

Scritto da: Eric & Amber

Great value tbh

We cut through block with this, went slow, and it cut through it no problem. Very good value if you’re only needing to make a cut or two. Definitely buy the shank that it suggests, no local retailer near me carrier 5/8” shank needed.

Scritto da: agent215

Works great!

Cuts through brick and cinder blocks easily!

Scritto da: Sootheez

Amazing

Now, this is a Diamond head drill! Awesome!!

Scritto da: C. Pollock

Seems good, but I couldn't use it because of imprecise dimensions.

This carotteuse / core drill bit seems plenty good for the price 62€. If you get a few holes out of it, or even one, you're fine. It's made in China, of course. But I had to return it un-used because the dimensions indicated in the images did not match. The images show 355mm from teeth to end of the 101mm circular part, but in reality it's 420mm. This was a problem because I needed to use a guiding drill bit and 400mm is the normal long size which would not protrude beyond the cutting teeth. This may not be a problem for you. Also, the description says that the adapter thread is 5/8" and it was about impossible to find such an item. I translated 5/8 to 16mm and found an M16 item, but it didn't really fit. It must be something like a M16 or 5/8" double-coarse (regular M16 the threads are too dense for this.) FYI the spec paper that comes with this shows thread 1.25in-7 but that's not right either - it's definitely about 5/8" diameter. The spec paper says inside depth 400mm, and overall length 450mm (teeth to end of knob for adapter) which seems to match the reality. The listing on Amazon really needs a link to a perfectly compatible adapter, and some more precise dimensions - because that's what we need.