VEVOR matu sprādzes metāla galda kājas 28 collu rakstāmgalda kāju komplekts ar 4 lieljaudas sola kājām 3 stieņu metāla mēbeļu kājas kaltas dzelzs kafijas galdiņa kājas Mājas DIY pusdienu galdam ar gumijas grīdas aizsargiem melns

Brand:VEVOR

3.5/5

89.15

Montāža bez problēmām: pusdienu galda kājas ir aprīkotas ar φ0,24 iepriekš izurbtiem caurumiem katrā kājā, padarot uzstādīšanu vienkāršu un īpaši ātru. Pievienotās pašvītņojošās skrūves palīdz raiti un ātri pabeigt visu procesu. Montāža bez problēmām: pusdienu galda kājas ir aprīkotas ar φ0,24 iepriekš izurbtiem caurumiem katrā kājā, padarot uzstādīšanu vienkāršu un īpaši ātru. Pievienotās pašvītņojošās skrūves palīdz raiti un ātri pabeigt visu procesu. Četras regulējamas pēdas: Rūpnieciskajās galda kājās ir četras regulējamas kājas, lai saglabātu lielisku galda līdzsvaru un pasargātu grīdu no skrāpējumiem. Jūs varat regulēt neslīdošo pēdu augstumu no 0 līdz 9,5 mm, lai pielāgotos nelīdzenai zemei. Lieljaudas galda kājas: Lieljaudas kājas ir paredzētas, lai atbalstītu slodzi līdz 992 mārciņām un nodrošinātu izcilu stabilitāti. Nepieciešamo koka vai metāla galda dēli varat uzlikt uz kājām bez raizēm. Premium metāla materiāls: galda kājas ir izgatavotas no izturīga tērauda materiāla. Augstums: 28/71 cm, montāžas plāksnes biezums: 0,1 /2,5 mm, bieza stieņa diametrs: 0,787/20 mm. Kāju virsma ir pārklāta ar matētu pārklājumu pret koroziju, rūsu un skrāpējumiem.

Nav pieejama neviena vienība
Montāža bez problēmām: pusdienu galda kājas ir aprīkotas ar φ0,24 iepriekš izurbtiem caurumiem katrā kājā, padarot uzstādīšanu vienkāršu un īpaši ātru. Pievienotās pašvītņojošās skrūves palīdz raiti un ātri pabeigt visu procesu. Montāža bez problēmām: pusdienu galda kājas ir aprīkotas ar φ0,24 iepriekš izurbtiem caurumiem katrā kājā, padarot uzstādīšanu vienkāršu un īpaši ātru. Pievienotās pašvītņojošās skrūves palīdz raiti un ātri pabeigt visu procesu. Četras regulējamas pēdas: Rūpnieciskajās galda kājās ir četras regulējamas kājas, lai saglabātu lielisku galda līdzsvaru un pasargātu grīdu no skrāpējumiem. Jūs varat regulēt neslīdošo pēdu augstumu no 0 līdz 9,5 mm, lai pielāgotos nelīdzenai zemei. Lieljaudas galda kājas: Lieljaudas kājas ir paredzētas, lai atbalstītu slodzi līdz 992 mārciņām un nodrošinātu izcilu stabilitāti. Nepieciešamo koka vai metāla galda dēli varat uzlikt uz kājām bez raizēm. Premium metāla materiāls: galda kājas ir izgatavotas no izturīga tērauda materiāla. Augstums: 28/71 cm, montāžas plāksnes biezums: 0,1 /2,5 mm, bieza stieņa diametrs: 0,787/20 mm. Kāju virsma ir pārklāta ar matētu pārklājumu pret koroziju, rūsu un skrāpējumiem.
Brand VEVOR
Color Black
Material Metal
Shape Hairpin
Style Industrial

3.5

10 Review
5 Star
71
4 Star
17
3 Star
4
2 Star
5
1 Star
3

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Johnny Eagan
Can't believe I paid so little for so much.
I decided to build a small hallway table. I needed legs that had adjustable feet. I saw these on Amazon and thought I'd take a chance because I can always return them if they're junk. Received them in three days and installed them the next day. They are sturdy, the black color was consistent and they have zero rattles. Couldn't be more pleased.
Scritto da: Thomas Harding
Difficult to align
Bought these for a small table top I wanted to make into a dinette. The legs are sturdy, but there is minimal instruction provided. As such I found it difficult to get the angled legs to align properly. The bolt pattern for attaching to the table wasn't much help either, as the holes in the plate are at an odd angle. It was nearly impossible to gauge if the legs were set at the correct angle to both the corner of the table and to each other until the whole thing was assembles and the turned up right. Since the legs were all off just slightly, the small table was wobbly and would not sit flush to the wall. I would try re-assembling it with a helper to make the mounting easier, but i am not sure that would actually address the other issues with the design. A note: I found these legs to be on the tall side for a dining table. This was corrected somewhat by removing the adjustable feet from the legs, but it still wasn't great. If properly installed, these would be perfect and attractive enough, however because of the difficulty I experience, I will likely be swapping them out for a set of generic hairpins.
Scritto da: Christmas elf
Easy to install, easy to level
I had a 3'x3' piece of baldcypress as a table top. These legs were perfect. The way they flare at the bottom increases the stability and the self-tapping screws made installation really quick. On my way to order more.
Scritto da: Kristy C
Saved my Kidney Table!
I saved my classroom kidney table with these great new legs. They are very sturdy and wonderfully made. They are not adjustable (which was okay with me because I wanted them sturdy), but with the feet it was a little higher than I wanted, so I removed them for now and it is perfect! I am so thankful I ordered these.
Scritto da: Claudia Lopez
Made a great console table
Nice and sturdy. Made a great console table for my new home out of these.
Scritto da: jose graterol
No es fácil de instalar
Primero no ofrecen estabilidad y segundo las patas no son iguales en tamaño y en forma por lo cual fue difícil instalar y no me gustó el resultado final
Scritto da: mike
Fast leg installation.
Worked great for a desk. Would have liked wood screws included.
Scritto da: Lisa Eckerle
Perfect!
Love how adding these legs turned out perfect and very sturdy.
Scritto da: jocelyne richer
Bonne qualite mais hauteur est erroné. 74 cm (29 pouce) au plus bas
Bonne qualite mais hauteur est erroné. Elle n'est pas 71,1cm (28 pouce) mais 74 cm (29 pouce) au plus bas
Scritto da: Jospon
Good look and fit
Perfect fit keep the good work

Saistītie produkti

hot
POWERTEC 71157 Bracket 4 Pack
3.6/5

€ 49.97

POWERTEC 71157 Bracket 4 Pack
3.6/5

€ 49.97

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array