Wera 05002990001 Vario 88/1 kombinēto asmeņu un rokturu komplekts vinila maisiņā, 11 daļ.

Name: Wera 05002990001 Vario 88/1 kombinēto asmeņu un rokturu komplekts vinila maisiņā, 11 daļ.
Brand: Wera
SKU: 4013288000675
Price: 119.80 EUR
Availability: InStock

Brand:Wera

2.8/5

€
119.80

Wera Vario sērijas skrūvgriežu klāsts ir daudz plašāks, lai atbilstu specifisku pielietojuma jomu prasībām, un tajā ietilpst asmeņi ar diviem galiem, dažādi rokturi, kombinēti skrūvgrieži un sprūdrata rokturi. Wera Vario rokas instrumentiem ir Kraftform daudzkomponentu rokturis, kas pielāgo formu rokai, lai visa roka saskartos ar rokturi, tādējādi novēršot skrūvēšanas radīto fizisko slodzi. Aizsardzība pret ripošanu roktura pamatnē aptur skrūvgriežus no ripošanas darba vietā. Wera — labākie instrumenti darbam!

Summa

Pievienot grozam Pērc tagad

EAN: 4013288000675

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, rokas darbarīki, Askrūvgrieži un uzgriežņu skrūvgrieži, Screwdriver Sets,

Vario asmeņi ir izgatavoti no augstas kvalitātes uzgaļu materiāla, lai nodrošinātu ilgāku kalpošanas laiku. Īpaši rupjiem darbnīcas darbiem. Ar Vario rokturi 80 un asmeņiem 81 (4, 6 un 5, 7), 84 (4, 4; 5, 5 un 6, 6), 85 (PH 1, PH 2), 86 (PZ 1, PZ 2), 87 (TX 10, TX 15; TX 20, TX 25 un TX 30, TX 40). Ietver sešu mm sešstūra asmeņus rievām, Phillips, Pozidriv, TORX un sešstūra ligzdas skrūvēm, 175 mm asmeņiem.

Brand	Wera
Country of Origin	Czech Republic
Domestic Shipping	Item can be shipped within U.S.
Head Style	Flat, Phillips, Pozidriv, Hex, Torx
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	9.1 x 5 x 1.5 inches
Item model number	05002990001
Manufacturer	Wera Tools
Material	Vinyl
Number of Items	11
Product Dimensions	9.1 x 5 x 1.5 inches; 2.56 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: ThroughTheLookingGlass

Quality, Compact, Flexible System

The Wera Vario system is very nice. I first got it because it was very compact way to have a large assortment of quality drivers in my tool bag and a great way to keep them organized. I enhanced this package with Roberson (square) bits in the Vario line, 1/4 drive extender, standard bit extender, and ratchet handle. I have a couple other handles in case I'm using several different drivers at once. It has worked great. The system does have one inherent limitation that can get you; the shafts are all a uniform 6mm (7mm across edges) so if a screw is recessed in a hole/well then the shaft may be too large to fit in the well to access the screw; say for a Phillips #1 or 4mm slot screw. In this regard I can see why the Xcelite drivers were favored in the past by electronic technicians and engineers, with long single ended bits on variable sized shafts, they did not have this issue. I probably won't carry a Xcelite 99 set as I have several ratchets and other components for hex drive, but I keep my 99 set handy at home. My solution will likely be to add a few long 3"+ bits for hex drive. I use the Xcelite system still to carry a wide range of stubbies, although I also have Wiha stubby handle and ratchets for hex bits, which usually work for stubby applications. I really like how compact this system is, I leave a Phillips bit and a slotted bit in handles for quick access to 4 bits, and have have the case still more than full with the original set of bits and a couple additions. That's a lot of versatility in a small convient package. I still carry an full set of 1" hex-bits in a small kit with extenders and what not, but the bit connectors have the same access problem (worse) than the Vario so they can't solve the access problem that requires a narrow shaft for a small sized fastener. This set/system is highly recommended with the above caveat.

Scritto da: Daniel Frank Howland

Quick shipping smooth transaction

Screwdriver set is perfect for my needs, high quality tool.

Scritto da: Dave

High quality, hard to find.

A coworker stumbled upon a Wera screwdriver almost 30 years ago. Shortly afterwards, I bought one and to this day, we haven't found a screwdriver that fits the screw head so well. As a result, it is easier to remove and secure tight screws. They are not easy to find in stores (price maybe?), but worth the effort and cost to find - it is a high quality tool that will last a LONG time. The case is well made and has a belt loop on the back, but it is just a nice accessory for me.

Scritto da: tim

bad design

OK let just say I am a big fan of Wera tools no thats not correct I am a huge fan. All my tools in my tool box are Wera now that we have this in mind why only 2 stars well where should i start may that the bits fall out of the holder it looks like an o-ring should hold them in but i am very sad to say no wera what were you thinking this is a bad design thanks for reading I hope this helps

Scritto da: Amazon Customer

Excellent quality

I wish it contained PH3 and Square Drive/Robertson bits. Other than that it’s been awesome, the bits don’t slip out of Phillips screws.