0
0

Общий:€ 0.00

Посмотреть корзинуПроверить
LoginRegister
0

Общий:€ 0.00

Посмотреть корзинуПроверить
LoginRegister

Бустерный водонагреватель Cash Acme 3/4 дюйма с термостатическим смесительным клапаном, датчиком температуры, шлангом в оплетке, бытовое и коммерческое применение, труба PEX, PE-RT, CPVC, медь, 24644 3/4 дюйма Pro, оплетка

Brand:Cash Acme

3.6/5

€
223.18

100 шт. нитриловые одноразовые перчатки - мягкие перчатки промышленного класса, нитриловые перчатки 4 мил без пудры, защитные перчатки без латекса, двусторонние, мягкие и удобные, маленький размер

Количество
добавить в корзинуКупить сейчас

EAN: 0697285246447

Категории Industrial & Scientific, Tools & Home Improvement, Rough Plumbing, Водонагреватели и запчасти, Запчасти для водонагревателей,

СЕРТИФИЦИРОВАН: Смесительный клапан для душа сертифицирован как для жилых, так и для коммерческих помещений; Внесены в список ASSE 1017 и 1070, внесены в список CSA B125.3, сертифицированы NSF/ANSI 372 и NSF/ANSI 61. БЕССВИНЦОВЫЙ: Термостатический смесительный клапан с манометром изготовлен из прочной и прочной не содержащей свинца латуни DZR. ПРОСТОТА УСТАНОВКИ: Смесительный клапан с защитой от ожогов оснащен инновационной технологией push-to-connect, позволяющей легко устанавливать трубу PEX, PE-RT, CPVC и медь; нет необходимости в пайке, клее или обжиме. ОБЕСПЕЧИВАЕТ БЕЗОПАСНУЮ ТЕМПЕРАТУРУ: Усилитель водонагревателя помогает предотвратить травмы от ожогов при принятии душа, регулируя выходную температуру до 120 градусов F (49 градусов C); можно повернуть до 140 градусов F (60 градусов C), чтобы предотвратить рост негигиеничных веществ. БУСТЕР РЕЗЕРВУАРА ГОРЯЧЕЙ ВОДЫ: Бустер водонагревателя со смесительным клапаном и манометром, активируемым температурой, смешивает горячую воду с холодной для подачи темперированной воды при контролируемой температуре; работает с газовыми, вентиляционными, электрическими и безбаковыми нагревателями.
Assembled Diameter ‎0.75 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Cash Acme
Brand ‎Cash Acme
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 357 ratings 4.5 out of 5 stars
Cutting Diameter ‎0.75 Inches
Included Components ‎One mixing valve
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3.3 x 4.6 x 3.3 inches
Item Dimensions LxWxH ‎3.3 x 4.6 x 3.3 inches
Item model number ‎24644
Item Package Quantity ‎1
Item Weight 2.5 Pounds
Item Weight ‎2.5 Pounds
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Maximum Pressure ‎150 Pound per Square Inch
Measurement System ‎US
Part Number ‎24644
Power Source Corded Electric
Power Source ‎Corded Electric
Product Dimensions ‎3.3 x 4.6 x 3.3 inches
Style ‎3/4 in. Pro, Braided
Thickness ‎11 Inches

3.6

11 Review
5 Star
74
4 Star
15
3 Star
3
2 Star
4
1 Star
5

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Brandon
Very nice!
This item works great. Install this, and set the water heater to 140 degrees. This is preset to 120 degrees. By doing this you'll gain more hot water for longer. Yes you will use a little more fuel but it's worth it. The only down side is these tend to go out after a few years. You'll start to notice temperature fluctuations from hot to cold. Just a heads up.
Scritto da: Paul Z
A lot of cheap parts, but at a good price...
I originally had two commercial grade hot water heaters with Watts hot water extenders which worked quite well. After one of the hot water heaters failed in about 25 years, I received a new Honeywell AM-1 extender valve with the new hot water heater and made the mistake of throwing out the Watts valve. While expensive, the Honeywell valve was useless. It could not be adjusted to produce real hot water and tended to allow hot water to go back up the cold water line resulting in a real short jolt of very hot water on occasion. The appealing thing of this package is that it checks off all the right boxes. Check valves on both incoming lines prevent heat loss from cooling water coming out of the water heater sinking back and being reheated. This circulation is an energy wasting heat conduction loop if there is no check valve to prevent it. The check valve on the cold water line prevents the jolt of super hot water on startup. If you buy a valve which does not build in check valves, be sure to buy them separately. The washers with strainer screens provided prevent debris in the water lines from plugging up the valve working similar to the strainers on sink faucets. A good idea. Now the details: Low lead brass-appears good quality Tee connector provided: useful if your hot water heater has pipe configuration they assume(mine doesn't) Main Body: I was hoping to attach a hose connection to the hot water input. This has special shallow hose threading that basically needs the union provided. The union holds the very thin washer/strainer but requires a male pipe thread on input. I ended up buying a low lead brass short nipple to connect this union to the input hose. Expensive units monitor actual water temperature using a wax based sensor. From the description of this device, I suspect it is just a cheap proportioning valve mixing hot and cold water in a given ratio. But for my purposes, it is good enough and it works! The kit includes a temperature gauge for output temperature. The one I got is wildly inaccurate and useless. I used a good quality corrugated hose previously purchased for cold water input. It surprised me that I could not get a good seal with the thin washer/strainer provided in the kit I ran out of thread on the valve body when tightening. I ended up using both the thick washer provided with the hose AND the thin washer strainer. The combo worked. I used the provided corrugated hose for hot water output. This is not a standard hose! It has a shorter threaded connector piece than standard hoses. It needs the unusually thin washers provided. Do not substitute washers from a standard corrugated hose or try using these thin washers in a standard hose.
Scritto da: Carol
Large Family Review.
Our family of 8 hasn't run out of hot water yet and it's been a few weeks since the install. Definitely worth the investment. Installing with Shark bites made my install very easy.
Scritto da: christie mcdonald
Works with tankless water heater
We have a Bosch combi furnace that heats the house and the hot water. Alas the hot water temperature on startup (set to 120 degrees) was up to 150 degrees F which is risk for scalding and probably relates to the unit heating the house. Although it did settle down to the set 120 degrees, the plumber felt the only solution was a temp controlled mixing valve ($800 to install). I installed the unit with SharkBite fittings (the slip connection on the cold water pipe worked but was a bit of a challenge to make it slip!). There does seem to be a rubber seal missing for the top union. It worked right away and works perfectly. For those considering a Combi house/water heater it is probably best to install an anti-scald valve with the furnace installation.
Scritto da: Jeremy L. Fortune
Does what it claims to do
I am not a pro plumber but have a decent amount of plumbing experience, mostly in the rigging of stuff to make it work arena :) I found this thing to be pretty easy to install, all things considered. Due to the location of my water heater, I put 90 degree elbows on both inlet and outlet to make it easier to add all of this additional hardware. I was able to get this installed with zero trips to the hardware store, which is a rarity for me. Some reviewers complained of missing gaskets but mine had all parts needed included. You will need a rubber gasket for each connection except the connections directly to your water heater inlet and outlet. For those, teflon tape should be used. Once I got it all installed, I tested and found the water temp was 120 degrees on the money without me making any adjustments. I set my water heater thermostats to 150 degrees upper and 145 degrees lower to maximize my hot water. We are a family of 10 with one 50 gallon water heater. We can all take showers at night now without having to wait for the hot water to build back up.
Scritto da: MikeA
So far, so good although I chased a leaky connection.
Overall, I like this product and what it does which is deliver more 120 degree water than without it. I can tell the difference when filling up a large bath tub, or when doing lots of loads of laundry, etc. It certainly was much cheaper than a new, larger, water heater. It seems to be of high quality construction and the installation was straight forward, although I did have a small leak between the union and mixing valve (step 1 of instructions). Once I used a washer, the leak went away and has been fine since. I'm not sure why a washer is not included or why mine seemed to leak the way it did. Time will tell how much adjusting will be necessary and how long it will last, but so far, so good. PS, I had a question and called into their tech support, left a voicemail message, and never got a call or email back. That was disappointing.
Scritto da: Amazon Customer
Fits and works well
Revised review: Installed it as directed and seems to work well. Finally able to understand how the valve system works and I am now able to control my water heater temperature with amazing precision. Highly recommended to anyone looking to upgrade or replace a mixing valve, does same if not better job for an amazing price. Also a solution for any concerns with Legionella or anyone having issues with scalding.
Scritto da: Matthew S.
Excellent for 2 story condo
We have electric hot water tank that always felt like it was running out on a 60G tank. Adding this to the unit was very easy (aside from needing an extra flat washer as others have stated) and we have literally never run out of hot water since.
Scritto da: Kyle
Not bad for the price, most mixing valves do not have a guage that comes with it.
Decent for its use, had a hard time getting it to adjust but managed. Note the Guage is very helpful.
Scritto da: Clinton
Works as advertised
Easy to install with some basic plumbing knowledge.
Scritto da: BREN
Item excellent easy to install
Works great as advertised. First delivery of item got lost. Amazon customer service was excellent I helping getting second order delivered. Which was great. As this item is very useful.

Сопутствующие товары

hot
Frost King SP57/11C Всесезонное изоляционное одеяло для водонагревателя, толщина 3 дюйма x 48 дюймов x 75 дюймов, R10
3.3/5

€ 114.45

Frost King SP57/11C Всесезонное изоляционное одеяло для водонагревателя, толщина 3 дюйма x 48 дюймов x 75 дюймов, R10
3.3/5

€ 114.45

hot
Rheem / PROTECH SP20075 Pilot Assembly Grey, 8,9X5,9X2,8 дюйма
3.4/5

€ 95.09

Rheem / PROTECH SP20075 Pilot Assembly Grey, 8,9X5,9X2,8 дюйма
3.4/5

€ 95.09

hot
Rheem SP20172 Комплект датчика легковоспламеняющихся паров FV, белый, 6,7X2,7X9,4 дюйма
3.8/5

€ 64.97

Rheem SP20172 Комплект датчика легковоспламеняющихся паров FV, белый, 6,7X2,7X9,4 дюйма
3.8/5

€ 64.97

hot
Hausen 18-дюймовый соединитель водонагревателя из нержавеющей стали 3/4 дюйма FIP X 3/4 дюйма FIP, линия подачи воды к водонагревателю, 1 упаковка 3/4 FIP x 3/4 FIP
3.9/5

€ 42.65

Hausen 18-дюймовый соединитель водонагревателя из нержавеющей стали 3/4 дюйма FIP X 3/4 дюйма FIP, линия подачи воды к водонагревателю, 1 упаковка 3/4 FIP x 3/4 FIP
3.9/5

€ 42.65

hot
SharkBite 3/4-дюймовый шаровой кран x 3/4-дюймовый FIP x 18-дюймовый плетеный гибкий соединитель водонагревателя из нержавеющей стали, латунный водопроводный фитинг, труба PEX, медь, CPVC, PE-RT, HDPE, U3088FLEX18BVLF 3/4 дюйма. x 3/4 дюйма x 18 дюймов Серебряный
3.7/5

€ 71.51

SharkBite 3/4-дюймовый шаровой кран x 3/4-дюймовый FIP x 18-дюймовый плетеный гибкий соединитель водонагревателя из нержавеющей стали, латунный водопроводный фитинг, труба PEX, медь, CPVC, PE-RT, HDPE, U3088FLEX18BVLF 3/4 дюйма. x 3/4 дюйма x 18 дюймов Серебряный
3.7/5

€ 71.51

hot
Поддон водонагревателя Oatey 34085, 30 дюймов, белый/алюминий 30 дюймов
3.3/5

€ 157.46

Поддон водонагревателя Oatey 34085, 30 дюймов, белый/алюминий 30 дюймов
3.3/5

€ 157.46

hot
Rheem SP10552ML SP10552ML-Водонагревательный элемент, малый
3.8/5

€ 47.48

Rheem SP10552ML SP10552ML-Водонагревательный элемент, малый
3.8/5

€ 47.48

hot
Ограничитель водонагревателя HoldRite на 360 градусов для водонагревателя на 80 галлонов, оцинкованная сталь, HR-80-360
3.7/5

€ 70.02

Ограничитель водонагревателя HoldRite на 360 градусов для водонагревателя на 80 галлонов, оцинкованная сталь, HR-80-360
3.7/5

€ 70.02

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array

Общий:€ 0.00

Посмотреть корзинуПроверить

Категории

Все категории
Меню Категории Около Корзина

Menu