Caframo Limited MRKCA02BX Комплект для замены двигателя Ecofan для моделей 800, 802, 805

Name: Caframo Limited MRKCA02BX Комплект для замены двигателя Ecofan для моделей 800, 802, 805
Brand: Ecofan
SKU: 0062503800020
Price: 42.68 EUR
Availability: InStock

Brand:Ecofan

3.6/5

€
42.68

Эковентиляторы рассчитаны на длительный срок службы, но со временем двигатели изнашиваются. Легко заменяемые разъемы и возможность пайки упрощают замену изношенного двигателя на всей линейке вентиляторов Ecofan. Большинство двигателей можно заменить всего за несколько минут с помощью отвертки и шестигранного ключа.

Нет доступных единиц

EAN: 0062503800020

Категории Home & Kitchen, Heating, Охлаждение и качество воздуха, Запчасти и аксессуары, Печи и камины Аксессуары, Запасные части,

В комплект входит новый двигатель, инструкция и шестигранный ключ. Мотор работает бесшумно. MRKCA02 предназначен для использования с моделями Ecofan 806 Belair. Двигатели Ecofan с легко заменяемыми разъемами можно заменить за считанные минуты. Дайте новую жизнь вашему вентилятору для дровяной печи Ecofan Belair Heat Powered.

Assembly required	Yes
Batteries required	No
Brand	Ecofan
Country of Origin	China
Customer Reviews	4.5 4.5 out of 5 stars 421 ratings 4.5 out of 5 stars
Included Components	Replacement motor, complete instruction guide, motor mount screws, Allen Key
Item Dimensions LxWxH	4.3 x 2.75 x 1.3 inches
Item model number	MRKCA02BX
Item Weight	0.18 Pounds
Item Weight	2.88 ounces
Manufacturer	Caframo Limited
Material	wood
Model Name	800/802/T805
Number of pieces	1
Product Dimensions	4.3 x 2.75 x 1.3 inches
Voltage	12 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: William Teitzel

Good replacement

Works great so far!

Scritto da: Mark D.

I'm sure for newer models this replacement is easy

I bought this on the off chance I could get it to work with my older Ecofan Airplus with soldered connections. I'm sure for newer models it's plug and play. I'm not great with a soldering iron and I couldn't get this to work. I desoldered the wired connector from the fan but couldn't clean the solder out of the tab holes. Maybe with a vise and magnifying setup but I don't have that, so I couldn't attach the existing wires to the new fan. I ended up buying m2 spade crimp connectors which actually connected the wire fine to the motor tabs but the connection must not be solid enough for such low voltage so the fan does not work. I ordered a new EcoFan model since I've had this one for many years. So it probably deserves a 5 star but I wish they made it easier to use with older models. That's the only reason I gave it 4 stars.

Scritto da: Paul peavey

Cheap fix

Cheap fix way better than buying a whole new fan easy to do

Scritto da: ADventureAng

Easy to install and works perfectly.

I am super happy with how easy this was to install and happy that I only had to buy this one part instead of buying a whole new fan. Last year, I noticed my 6 year-old fan was getting slower and slower and then stopped working all together even though it was on a perfectly hot wood burning stove. I was prepared to shell over the money for a new fan and then I came across something that said the motors do end up dying over time and that you can just replace the motor. Who knew?! I made sure this was the right motor and last night when the package came in the mail, it took me all of 2 minutes to swap it out. It comes with a little allen key to take the blade off the motor, then you just need a little screw driver to get the housing clamp loose on the fan. Then, just clip the plug to the unit, then place it back in the housing unit, re-attach the blade, and you're done! I looked at the directions AFTER the fact and it shows soldering irons and stuff, but I think that's if you purchased the wrong motor and have to do some modifications. Since I didn't have my fireplace going yet, I decided to see if the fan worked by putting it on the regular stove. I'm not sure if that's good for the fan or not, but I really wanted to see if it work and TA DA, it worked like a charm! I am so happy with my little purchase because now I have a perfectly perfect fan that I use to direct the heat from my wood burning stove in to the other room. THANKS!

Scritto da: Jim Davis

Soldering may be required, depending on the age of your Ecofan

I used this motor kit to fix an older model fan. Old enough to not have a model number, just a serial number. My fan, which I had bought for my parents as a gift, did not have terminal connectors for the wires, so I had to solder in the replacement. The motors (old and new) had a red dot near one of the terminals, presumably marking polarity, so I made sure to connect the wires in the same orientation. The near wordless guide that came with the kit was adequate. The price of the kit made for an economical fix. I have built multiple fires now, and the fan is working like new. Although I did not do it this way, the motor (on my model) can be replaced without taking the entire fan apart. On my model, there is a collar bracket that holds the motor in place, and one machine nut and bolt tightens the collar around the motor. Loosen this nut, and the motor will slide out. If one disassembles the fan, I advise taking photos of the assembly to make sure that it goes together the way it came apart. There are non-metal bushings that appear to isolate the motor mount from the screws holding the assembly together. If not assembled correctly, heat could be transferred to the motor mount, and the motor, which might shorten its working life.

Scritto da: Mason Wiles

Perfect fit

If you have any ecofan 800 this is a perfect fit. Could have shipped faster, but what was just what I needed.

Scritto da: Ray S.

Just what was needed

Quick easy replacement performed flawlessly. Watched several you tube vids on repairing our stove fan- all pointed to a problem which didn’t exist with ours. Used mfg recommendation to simply replace motor. This item reasonably priced, restored our fan to like new condition and operation (sans dust!).

Scritto da: Linda D Thompson

Easy to install if you know how to solder.

You might need a soldering iron to install this if you have the earlier version, but the fan runs like new again! Well worth it, considering the cost of a new fan. The old fan motor lasted at least 15 years, we heat all winter with wood and when the fan finally quit, I didn’t realize how much of a difference it made in circulating the warm air! I wish they made one that worked on a wall mounted heater. Love that it doesn’t use electricity!

Scritto da: John Ermanson

Works ok.

High price but works really well.

Scritto da: Naomi

Quick to fit and fixed broken fan

Wasn’t sure this would work as I’d previously tried wiring the old motor to a a battery and it seemed to spin, but didn’t work when put on on top the woodburner. So rather than buy a new fan thought I’d give this a go. Took 5 min to fit and now the fan is going 10 to the dozen on top the woodburner. It’s amazing the difference these fans make to the heat of the room

Scritto da: Chadwick Samson

Quick shipping!!

Easy to install. Plug and play

Scritto da: Nicky

Excellent

Perfect replacement for my old motor that had gone slow and was making noise. 5 minutes to change the motor and its like new. Spinning fast with no noise

Scritto da: Pat Kenney

New fan motor works great - with helpful instructions.

Order arrived quickly (48 hours). The box included the replacement Ecofan motor (model 802), the allen key required to remove the fan blades and an instruction booklet. My fan is an old model so I had to use a soldering iron to remove the wires from the new motor - but it was a snap to solder the new motor to the wires on the Ecofan. The new motor works great. Like having a brand new fan for my woodstove. It also helps to know that there is a video on their website providing step-by-step instructions for replacing the motor for this fan.