Calculated Industries 8120 Plug Mark Обозначение электрической коробки для гипсокартона для существующих электрических розеток при ремонте и замене, красный

Brand:Calculated Industries

3.6/5

55.54

О продукте: Особенности: Струнные огни с фотоклипами - это функциональные огни - это могут быть обычные гирлянды, а также фотодисплей. Он может украшать ночь, а также может быть красивым настенным декором. Он очень прост в использовании, каждый зажим со светодиодом сделает вашу комнату крутой, вам понравится! Украшайте где угодно - эти гирлянды маленькие, но полезные, портативные гирлянды в ваших руках с бесконечными возможностями. Его можно положить или повесить на стены, окна, двери, полы, потолки, травы, рождественские елки и т. Д. Независимо от того, внутри или снаружи. Прочный зажим - зажимы прочные, ваши фотографии никогда не упадут, вам просто нужно крепко зажать их. Низкое энергопотребление. Безопасный, надежный и экологически чистый. Струнные светильники фото клипсы снабжены небольшими клипсами - каждая клипса содержит светодиод, который излучает теплый белый свет. Идеально подходит для подвешивания фотографий, произведений искусства, демонстрации легких предметов и многого другого. Идеальный подарок - это будет самый креативный и функциональный подарок для ваших друзей, семьи, все они будут потрясающими с вашим хорошим подарком! Идеальное украшение для Дня святого Валентина, Рождества, других праздников, вечеринок, свадеб и т. д. Технические характеристики: * Количество светодиодов: 20 шт. * Цвет провода: прозрачный * Цвет светодиода: теплый белый * Общая длина: 4 м / 12 футов * Общее количество светодиодных бусин: 20 Светодиод * Расстояние между каждыми двумя лампочками: 15 см * Входное напряжение: 3 * батарейки типа АА (не входят в комплект) Примечание: НЕ ВОДОНЕПРОНИЦАЕМЫЙ, чтобы сохранить долгий срок службы и хорошее функционирование, держите его от дождя и сырости. Если вы получаете продукт, который какой-то клипсы уже отвалились, вы можете установить их самостоятельно, это не проблема качества, это может быть вызвано логистикой. Спасибо за понимание. Если у вас есть какие-либо вопросы, пожалуйста, свяжитесь с нами.

Две включенные мишени подходят для большинства нормально ориентированных розеток, отличных от GFI/GFCI, мощный локатор находит мишени, показывает периметр коробки, которую нужно разрезать. Окупается за счет предотвращения дорогостоящих и досадных ошибок измерения. Получите профессиональные результаты, которыми вы сможете гордиться впервые и каждый раз, с помощью этой надежной запатентованной технологии. Идеальные вырезы в гипсокартоне в два раза быстрее без замеров с использованием мощных редкоземельных магнитов. Магнитный инструмент находит существующие отверстия для электрических розеток в установках для восстановления и замены гипсокартона.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Calculated Industries
Color Red
Color ‎Red
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 597 ratings 4.5 out of 5 stars
Included Components ‎full one-year limited warranty, 1 Locator Magnet, Includes 2 Target Magnets
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3.75 x 2.25 x 0.75 inches
Item model number ‎8120
Item Package Quantity ‎1
Item Weight 0.25 Pounds
Item Weight ‎4 ounces
Manufacturer ‎Calculated Industries
Part Number ‎8120
Product Dimensions ‎3.75 x 2.25 x 0.75 inches
Style Compact
Style ‎Compact
Warranty Description ‎One-year limited warranty

3.6

13 Review
5 Star
71
4 Star
16
3 Star
8
2 Star
2
1 Star
3

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Amazon Customer
Basically works
This tool basically works but it does not help you to create an exact outline of the outlet… The outline comes out a little bit low, about a half an inch. I had to use a rotary saw to go in and trim that half inch off the top in order to make it fit. As you can see I made a mess, but I still think it’s better than the old method of measuring from the top and sides. Definitely save time!
Scritto da: Ebby
Did not fit my GFCI and did not work through cabinet backs - worked with modifications
I ordered this to help me align outlet holes in the backs of cabinets to the outlets on the wall. I had several problems but did work them out and with modifications got this item to serve its purpose. These did not fit into our GFCI outlets and while I was trying, one of the little plug/knobs that go into the outlet broke off. So then it did fit, with just one knob holding it in and I found that it didn't work for my purpose because the magnet couldn't stick across the 1/8" gap between the back of the cabinet and the wall. Fair enough. (I do wonder how it sticks through things like tile in that case.) Modified it by taping the outlet piece to a piece of styrofoam and then taping that to the outlet so it was extended away from the wall. Pressed the cabinet up against it and then the other piece was able to find the magnet and stick. Cut the hole . . . and it was off by about an inch. Ugh and sigh. It was user error, but be warned this is not simple dumb fool proof. Check, double check and experiment. Overall glad to have this in my tool box, even broken and requiring modification.
Scritto da: Cheryl Dodson
Works like all the reviews say!
These little things are great and work just like the reviews state!
Scritto da: SCOTT E BATES
Works great.
These drywall electrical box cutout locators work very well. Makes finding electrical box’s much easier and faster than measuring.
Scritto da: Amazon Customer
As expected
Made it easy peasy to locate and cit out outlets in wall boards
Scritto da: Kindle Customer
A HUGE timesave, easy to use, and made the project so much simpler to accomplish
Wish you could give more then 5 stars on this product. This is a REALLY cool product. I just remodeled my basement, and had to cut about 300 outlets (ok, 9, but thats still a pain!). The drywall had been up for years with outlets, but we had decided to panel. So, I was looking at having to carefully measure and cut each, and hope I had everything lined up perfect (which I am NOT good at, by the way). I happened across an article about this product in a woodworkers blog, and so ordered this to give it a try ($20 was worth the effort if it even kind of worked). Opened it, grabbed my rotozip, and less then 1 1/2 hours later I had the whole room paneled and cover plates reinstalled.. Pop the target into the outlet, hang the paneling, find the target with the box piece, trace around it, and zip it out. It cuts JUST outside the edge of the box if you follow your lines closely. Take your time following the lines, and your existing plates work great! WARNING!!! From experience (and cutting through one of the targets): MAKE SURE YOU TWIST IT ONCE CONNECTED!!! You want to make dang sure that you caught both magnets, not just one. I was getting cocky near the end and didn't check one. OOPS! These magnets are strong, so once you "find" the target and the magnet grabs, just twist it left and right. You will quickly be able to tell if both magnets grabbed, or if you are just floating on one. If you can easily twist it, keep turning it until the other magnet lines up and it snaps into place, then trace and cut!
Scritto da: Nash
It works great, but…
It’s pretty darn accurate, but it does not account for the whole outlet box. So if you think you will ever need to replace the whole thing…cut it a little bigger.
Scritto da: William Perry
Once receptacle was installed in the box, it worked great.
Didn't realize that you had to put in the receptacle before it would stay so it could be marked on the sheetrock. Once receptacle was installed, it worked great.
Scritto da: JPB
Fit perfectly
Does the job perfectly
Scritto da: Randy G.
Great product - great design - but one target tab broke after third use.
I really like using this product - saves time and makes it the cutouts more accurate. But one of the tabs on one target broke when trying to pull it out of a plug. It was only on the third use. So have been using take to hold it in place every since. I would really like to order more of the targets. Maybe someone from Calculated Industries can contact me. I would certainly up my rating if i could get more targets.
Scritto da: Ian
On Taeget
Haven't had a chance you use kit on site yet! Tested on a scrap piece of drywall and it did exactly as advertised. Must remember to mark index points on drywall and floor etc., for easy line-up after cutting hole!
Scritto da: Amazon Customer
Awesome
I have all of these. Goodbye tape measure when cutting out drywall boxes.
Scritto da: A.Z
Very useful
Very useful

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array