Дрель America 2-1/2 Твердосплавная кольцевая пила/фреза с 1 глубиной резания, серия CTH 1 Глубина резания 2-1/2

Name: Дрель America 2-1/2 Твердосплавная кольцевая пила/фреза с 1 глубиной резания, серия CTH 1 Глубина резания 2-1/2
Brand: Drill America
SKU: 0887861226301
Price: 118.67 EUR
Availability: InStock

Brand:Drill America

3.7/5

€
118.67

Фрезы с твердосплавными наконечниками Drill America CTH предлагают простой и эффективный способ сверления отверстий большего диаметра без использования больших сверл и сверхбольших патронов. Они изготовлены из быстрорежущей стали премиум-класса с зубьями с твердосплавными напайками для увеличения срока службы. Фрезы с твердосплавными наконечниками Кольцевые фрезы режут широкий спектр материалов, таких как нержавеющая сталь, чугун, железо, листовой металл и медь. Они также хорошо работают с абразивными материалами, такими как смола высокой плотности и металлические пластины. Фреза для отверстий имеет хвостовик 1/2 и поставляется с пилотным сверлом и шестигранным ключом.

Количество

добавить в корзину Купить сейчас

EAN: 0887861226301

Категории Tools & Home Improvement, Power & Hand Tools, Запчасти и аксессуары для электроинструмента, Запчасти и аксессуары для мощных дрелей, Пилорамы и принадлежности, Сверла,

Поставляется с пилотной дрелью, шестигранным ключом и пулей с автоматическим извлечением. Хвостовик 1/2, глубина резания 1 фут. Резка широкого спектра материалов, таких как нержавеющая сталь, чугун, железо, листовой металл и медь. Хорошо работает с абразивными материалами, такими как смола высокой плотности и металлические пластины. Простой и эффективный способ сверления отверстий большего диаметра без использования больших сверл и очень больших патронов. Диаметр 2-1/2 с глубиной резания 1.

Brand	Drill America
Cutting Diameter	2-1/2" Inches
Finish Type	Uncoated
Is Discontinued By Manufacturer	No
Item model number	CTH2500
Manufacturer	Drill America
Material	Carbide-Tipped
Product Dimensions	6 x 4 x 4 inches; 15.87 Ounces
Shank Type	Hex

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: Daryl B.

Excellent cutter!

This cutter gave a very smooth cut in 1/8" aluminum panel for my project! This is a large diameter size, so be cautious of the speed. My drill press was slowed to 700 rpm's. VERY PLEACED WITH THIS PRODUCT. Thanks, from Indianapolis.

Scritto da: caihu lemon

Cut quality

From now on this is the only brand I will use for hardened drill bits drilled 3/16 of 304ss

Scritto da: J W

Works great if used properly

Bought this for working with heavy steel, I have cut 3 holes through 1' mild steel and as many through 1/2'. It took some tuning to get the drill press dialed in, but at the proper speed and with some lubricant it does a nice job. On pieces thicker than 1/2 it works best to flip the metal over halfway through the cut to finish from the other side. Looks pretty much new after the 6 holes I've used it for, looking forward to using it on the next job.

Scritto da: shabbyjude

Best Cutter, but BEWARE

This is by far the best hole saw I have ever had over the last 50 yrs....the only negative is the quality control...after drilling 1 [ONE!!!!] hole, the set screw fell out...at least the screw had the courtesy to wait until the drill press stopped....so beware to check the set screws before using....I drilled a small relieve on the shaft so the set screw would not just be sitting on a flat area....then max lock tight on both screws....drilled 10+ more holes with 0 [ZERO] problems...that's why it gets a 5 star rating, unlike other hole saws with carbide tips that only manage to get thru a few uses...I am cutting thru 3/8'' plate steel and couldn't be happier....

Scritto da: APO

Heavy duty

The casing is 1/8" thick, 1" depth and heavy duty. Not like the other brand which casing is 1/16 thick. The picture shows shallow depth however it' 1" deep, compatible with Japanese product selling on MSC @ a higher price

Scritto da: Rich Bessom

Use at low RPMs with plenty of cutting oil.

I was very pleased with the operation of the 2-5/16" carbide tipped hole saw! I had to make 4 holes for the marker side lights on my vintage race car trailer that I'm rebuilding. I used it in an old 1/2" craftsmen hand drill motor. All the holes drilled very smoothly. The pilot drill worked great & didn't let the saw wander. The metal was 14 gauge steel, roughly a little thicker then a 1/16". The hole saw still looks brand new. It was shipped in a plastic protective container along with the Allan wrench for the pilot drill. It was well worth the money! I would recommend this tool! Thanks!

Scritto da: Jerry Sikes

Cut through body steel like a hot knife through butter

Following proper use recommendations to use cutting fluid to cool the tool and operating at a slow speed the tool surpassed all o my expectations and smoothly cut a clean precise hole even using it in a hand held drill. It is the best hole cutting bit I have ever used. I highly recommend this tool and have already purchased additional sizes. I am not a professional in a machine shop I use this at home.

Scritto da: PDGx

Fast and aggressive drill

Very aggressive hole saw/drill. Used on structural channel iron to pass 3.5” pipe through (3.5” drill size). Final hole does appear to be about a 64th small, but that is easy to correct. Just keep it lubed with cutting fluid.

Scritto da: Grant

Quality Product!

We use this product daily to add extra ventilation in our shipping containers. Quality product!

Scritto da: Sparkbing

Drill bit is garbage

Drill bit broke within seconds Can replace it nor does the seller have replacement bits

Scritto da: Becky Erickson

Five Stars

Good product.