Extech SD800 Регистратор данных CO2, влажности и температуры

Brand:Extech

2.8/5

661.33

Увеличить РЕГИСТРАТОР ДАННЫХ CO2/ВЛАЖНОСТИ/ТЕМПЕРАТУРЫКонтролируйте качество воздуха в школах, офисных зданиях, теплицах, больницах и везде, где образуются высокие уровни углекислого газа. Регистратор данных CO2/влажности/температуры проверяет концентрацию углекислого газа и записывает данные на SD-карту емкостью 2 ГБ в формате Microsoft Excel для удобной передачи на ПК для анализа. Тройной ЖК-дисплей одновременно отображает все три параметра и выбираемую частоту дискретизации данных 5, 10, 30, 60, 120, 300 и 600 секунд. Каждое сохраненное показание включает отметку даты и времени. Диапазоны измерения: от 0 до 4000 частей на миллион CO2; от 10 до 95 процентов относительной влажности; Температура от -58 до 2372 градусов F (от -100 до 1300 градусов C). ЧТО В КОРОБКЕ В комплекте с шестью батареями AAA, SD-картой на 2 ГБ, универсальным адаптером переменного тока, монтажным кронштейном и руководством пользователя. БОЛЬШЕ ИНСТРУМЕНТОВ EXTECH НА ВЫБОР SD500 (увеличение) РЕГИСТРАТОР ДАННЫХ ВЛАЖНОСТИ / ТЕМПЕРАТУРЫ Регистратор данных влажности / температуры записывает данные на SD-карту на 2 ГБ. карточка в формате Microsoft Excel для удобной передачи на ПК для анализа. SD500 оснащен двойным ЖК-дисплеем, который одновременно отображает относительную влажность и температуру, а также выбираемую частоту дискретизации данных: 5, 10, 30, 60, 120, 300 и 600 секунд. Каждое сохраненное показание включает отметку даты и времени. Диапазон температур от 10 до 95 процентов относительной влажности и от 32 до 122 градусов F (от 0 до 50 градусов C). В комплекте с шестью батареями AAA, SD-картой на 2 ГБ, универсальным адаптером переменного тока, монтажным кронштейном и руководством пользователя. Отображает атмосферное давление в 3 единицах измерения: гПа, мм рт.ст. и дюйм рт.ст. Тройной ЖК-дисплей одновременно отображает атмосферное давление (от 10 до 1100 гПа / от 7,5 до 825,0 мм рт. ст. / от 0,29 до 3248 дюймов ртутного столба), температуру (от 32 до 122 градусов F / от 0 до 50 градусов C) и относительную влажность (от 10 до 90 процентов относительной влажности). ). Регистратор данных ставит отметку даты/времени и сохраняет показания на SD-карте емкостью 2 ГБ в формате Microsoft Excel для удобной передачи на ПК. Выбираемая частота выборки данных: 5, 10, 30, 60, 120, 300, 600 секунд. В комплекте шесть батареек AAA, SD-карта на 2 ГБ, универсальный адаптер переменного тока, монтажный кронштейн и руководство пользователя.

Тройной ЖК-дисплей одновременно отображает CO2, температуру и относительную влажность. Не требующий обслуживания двухволновой датчик NDIR (недисперсионный инфракрасный) CO2. Проверяет концентрацию углекислого газа (CO2). Записывает данные на SD-карту в формате Excel.
Alarm Audible
Alarm ‎Audible
Batteries ‎6 AAA batteries required.
Batteries Included? ‎Yes
Batteries Required? ‎No
Battery Cell Type ‎Alkaline
Brand Extech
Brand ‎Extech
Country of Origin ‎Taiwan
Customer Reviews 3.7 3.7 out of 5 stars 4 ratings 3.7 out of 5 stars
Included Components ‎Product & Instructions Guide
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3.1 x 1.3 x 5.2 inches
Item Dimensions LxWxH ‎3.1 x 1.3 x 5.2 inches
Item model number ‎SD800
Item Package Quantity ‎1
Item Weight 0.28 Kilograms
Item Weight ‎0.28 Kilograms
Item Weight ‎9.9 ounces
Manufacturer ‎Extech
Number Of Pieces ‎1
Operating Humidity 90 percent
Operating Humidity ‎90 percent
Part Number ‎SD800
Power Source Battery Powered
Power Source ‎Battery Powered
Product Dimensions ‎3.1 x 1.3 x 5.2 inches
Sensor Type Non Dispersive Infrared
Sensor Type ‎Non Dispersive Infrared
Style SD800
Style ‎SD800
Thickness ‎1 Inches
Upper Temperature Rating 50 Degrees Celsius
Upper Temperature Rating ‎50 Degrees Celsius
Warranty Description ‎6 months

2.8

2 Review
5 Star
37
4 Star
13
3 Star
37
2 Star
13
1 Star
0

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: McBeardsalot
Misleading product description: Is not battery operated
Be aware that this product is not battery operated. The 6 AAA batteries are only present to keep the date and clock from resetting when you unplug the device from the wall. In order to take measurements and log data, the unit *must* be plugged into the wall. If you do not need to be mobile, this device may work for you. I rate this product as two stars primarily because I believe the product to be misleading. While it does not explicitly state that the unit can run on battery power alone, I have never known any other device to use a full 6xAAA 9v battery bank to power a real-time clock. It is also very typical for CO2/temperature/humidity monitors and dataloggers of this size to run off of batteries or a wall adapter. The response I received from tech support was that it was clearly stated in the documentation that the batteries only power the clock. While this is technically true, the only place where this is stated is on the final page of the user's manual in small print in the subsection that gives details on the required power supply. I would argue that a consumer's due diligence should not have to include reading the full user's manual to the final page. Additionally, the fact that the battery limitation is mentioned at all is evidence that the company realizes this is atypical. Aside from the battery issue, the device is of mediocre build quality and the buttons felt cheap and were not particularly responsive. Each button press is accompanied by a very loud and high pitched chirp, rendering this exceptionally unpleasant to use in quiet locations. I cannot speak to the quality of the data that the device produces, as I will be sending this unit back and ordering a device from a different manufacturer.
Scritto da: hebohero
Did the job but I hate the battery issue!
Good value, does work, clear and easy to use, solid enough, and does not required a special software (Excel file format). However, there is a big issue about the battery! (Warning) this device required to be plugged into a power outlet all the time, although it has 6 high-performance batteries at the same time! Thus, it is not 100% portable. In other words, the device need both power outlet and 6 high-performance batteries duration of use and recoding data! Why it need 6 high-performance batteries? for saving data in case the power is cut! my PC need one tinny flat battery!ooh.. by the way, the device will not work without installing these batteries even if you plug into socket! In addition, I did not like the separated sensor (CO2), its cable is too short and I prefer if the sensor was included the device structure.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array