Frigidaire 5304458371 1 Ледогенератор

Name: Frigidaire 5304458371 1 Ледогенератор
Brand: FRIGIDAIRE
SKU: 0717449027580
Price: 202.26 EUR
Availability: InStock

Brand:FRIGIDAIRE

3/5

€
202.26

Triplett CBF200 — это полезный инструмент, которым может управлять один человек для бытовых и коммерческих электриков, домовых инспекторов, установщиков кухонь и ванных комнат, управляющих недвижимостью в квартирах/квартирах, мастеров-сделай сам и разнорабочих. Инструмент имеет эксклюзивный режим сравнения, который идентифицирует правильный выключатель, даже когда мощность сигнала очень близка. Приемник также функционирует как бесконтактный детектор напряжения, а передатчик также позволяет пользователям обнаруживать неисправную проводку в 3-проводных розетках и тестировать GFCI на предмет правильной работы. Яркие светодиоды инструмента указывают на 6 неисправностей проводки, в том числе обрыв заземления, разомкнутая нейтраль, горячий/земля, обратный, обрыв горячий, горячий/нейтральный, обратный, горячий на нейтрали с горячим разомкнутым. CBF200 позволяет безопасно идентифицировать расположение выключателей в любом электрическом щите без отключения питания. CBF200 также позволяет пользователям обнаруживать неисправную проводку в 3-проводных розетках, тестировать GFCI на предмет правильной работы и определять напряжение без контакта. Устройство поиска автоматических выключателей CBF200 весит всего 9,8 унций, внесено в список cETLus и поставляется с передатчиком, приемником и батареей 9 В. Компания Triplett Test Equipment, основанная в 1904 году, является ведущим поставщиком контрольно-измерительных приборов и инструментов. Клиенты Triplett извлекают выгоду из более чем 100-летнего опыта инноваций и экспертных решений для решения проблем в различных отраслях. Инструменты Triplett помогают профессионалам в области электромонтажных работ, телекоммуникаций для передачи голоса/данных/видео (VDV), установки и обслуживания систем видеонаблюдения/охранного видеонаблюдения, восстановления после повреждения водой и многого другого. Triplett базируется в Манчестере, штат Нью-Гэмпшир, и является частью Jewell Instruments.

Количество

добавить в корзину Купить сейчас

EAN: 0717449027580

Категории Appliances, Аксессуары для крупной бытовой техники, Запчасти и аксессуары для холодильников, Ice Makers,

Страна происхождения: Китай. Это оригинальная запасная часть. Модель производителя 5304458371. Артикул Frigidaire.

Batteries Included?	‎No
Batteries Required?	‎No
Customer Reviews	4.0 4.0 out of 5 stars 123 ratings 4.0 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎5304458371
Item Package Quantity	‎1
Item Weight	‎1 pounds
Manufacturer	‎Frigidaire
Part Number	‎5304458371
Product Dimensions	‎1.5 x 2.5 x 3.5 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: Wardell Scott

It works

None

Scritto da: Frank

Open box, good product

This was an open box item available at a reduced cost. Small crack in unit but does not affect unit working properly.

Scritto da: Bob H.

Just what I needed!

My ice maker stopped working so I called the number in the refrigerator to have a serviceman come out and repair it, which results in a recording listing off places in the general area that are certified to assist. I called all of them, but each time I was told that it would be several weeks and in some cases was told that they could not assist me at all. I eventually decided to replace it on my own. After doing some research to find the model that was compatible with my fridge, I found the model I needed available on Amazon with Prime shipping (bonus!). This overall replacement is super easy. As a piece of advice - you do not need to completely remove the screws that attach the mounting bracket to the inside of the freezer. Just loosen them up and the old ice maker will lift out. You can then easily slide the new one in in its place. Overall the removal and installation took about 15 minutes and I had ice shortly thereafter!

Scritto da: Shane7892

Good Replacement

Arrived fast. Easy to install, took 5 minutes.

Scritto da: Wibbo

Works well, but look to see if you need a leveling bracket before purchasing.

Great, but missing the leveling bracket the original ice maker had. The leveling bracket may be necessary -- it the ice maker is not installed level front to back the ice maker may not produce a full load or cube sizes may vary. If the ice maker is not installed level side to side, lopsided cubes may form. There is no other way to level the ice maker from side to side without the bracket, so be sure this will work for your application if your floor and refrigerator are not perfectly level. Otherwise a good replacement product. PS -- we've read elsewhere on appliance tech blogs that these sorts of ice makers last only about 3-4 years and that it's best to replace the entire unit rather than whatever component may have failed. It's good to know that I can replace the $100 ice maker in the $2000 fridge rather than have to replace the entire fridge.

Scritto da: ctpenny

This was a perfect replacement for my Kenmore model 253

***update*** After working great for just under 1year, the ice maker control board is now malfunctioning, requesting water too often and causing water to overflow. Seller only offers returns for 30 days. This was a perfect replacement for my Kenmore model 253.56602400 Fridge/Freezer. Wasn't too difficult to install and has been working GREAT for the past 6 months. Hopefully writing this review doesn't jinx that! This item was actually an entire kit that came with a hose, ice tray, and other parts that I didn't need. My only negative was the description didn't indicate that, but the main Ice Maker was there and has been working great.

Scritto da: Jennifer H.

Works great!

I got this to replace the one that came with my fridge and broke after 3 years. This was easy to install and works perfectly. Only gave 4 stars because when it arrived the front plastic cover was cracked. I'm not sure who's fault that is but I didn't care since I just used the old ones cover but if you are going to use this as a new one it might be worth noteing.

Scritto da: LuvDogz

...I was pretty sure I couldn't do this....

! I replaced it myself !! Proud I am ! The hard part was getting to the two 1/4 inch screws that hold the icemaker to the inside sidewall of my freezer....the non-working icemaker's "fingers" were partially extended, and blocked access to those screws....so.....once I finally got them backed-out some, the unit was easily removed....the new one went in with little difficulty since its "fingers" were laying flat, out of my way....oh....how-to videos gave me the push I needed to try this....????

Scritto da: André Montgrain

Five Stars

perfect thanks