Коммерческий дегидратор для пищевых продуктов Chef, дегидратор для продуктов питания и вяленого мяса, CCD100W6, 280 Вт, белый

Brand:Commercial Chef

3.5/5

127.65

Превратите свои любимые фрукты, овощи и мясо во вкусные и полезные закуски с помощью этой выдающейся машины-дегидратора COMMERCIAL CHEF для дома. Благодаря диапазону температур от 104° до 158° F вы можете легко определить наилучшие настройки этого дегидратора для вяленой говядины, сушеных грибов и даже трав. Благодаря 5-ти ярусным лоткам вы можете обеспечить равномерную сушку и оптимальную производительность с нашей превосходной мясорубкой. Каждый лоток съемный и стирается только вручную. Компактные размеры нашего дегидратора для вяленого мяса мощностью 280 Вт (9,92 дюйма x 9,43 дюйма x 7,01 дюйма) позволяют легко хранить его на кухне. Руководство по сушке также включено для тех, кто плохо знаком с захватывающим миром дегидраторов.

ЗДОРОВЫЕ ЗАКУСКИ — Наш невероятный дегидратор поможет вам выполнить ваши новогодние обещания, приготовив быстрые, легкие и полезные закуски. Эта сушилка для пищевых продуктов подходит для различных домашних продуктов, таких как грибы и индейка, а также для закусок, таких как банановые чипсы, фруктовые рулетики и вяленая говядина. ЛЕГКО ХРАНИТЬ И ЧИСТИТЬ — лотки в нашем фантастическом дегидраторе для мяса можно мыть только вручную, что упрощает их очистку и упрощает хранение. Поместите этот дегидратор для дома в кухонную кладовую или шкаф, когда он не используется. РЕГУЛИРУЕМЫЙ ДИАПАЗОН ТЕРМОСТАТА. Эта сушильная машина (3,3 фунта) имеет регулируемую температуру в диапазоне от 104 ° до 158 ° F. Определите оптимальную настройку, и пусть этот производитель вяленого мяса сделает всю работу за вас!. 5 СЛОЕВ ПОДНОСОВ. Этот феноменальный кухонный прибор считается одним из лучших дегидраторов для продуктов питания и вяленого мяса. Он состоит из 5 круглых противней, которых достаточно для хранения большинства продуктов и обеспечения равномерной сушки. ИСПОЛЬЗУЙТЕ С ВАШИМИ ЛЮБИМЫМИ ПРОДУКТАМИ. Этот дегидратор COMMERCIAL CHEF удаляет влагу и сохраняет оригинальный, нюансированный вкус ваших любимых закусок. Наш выдающийся дегидратор для пищевых продуктов (9,92 дюйма x 9,43 дюйма x 7,01 дюйма) оснащен мощностью 280 Вт для сохранения вашего любимого мяса, фруктов, овощей, фруктов и даже трав.
Brand Commercial Chef
Color White
Country of Origin China
Customer Reviews 4.4 4.4 out of 5 stars 1,968 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Is Dishwasher Safe No
Item Dimensions LxWxH 9.92 x 9.43 x 7.01 inches
Item model number CCD100W6
Item Weight 3.3 Pounds
Manufacturer W Appliance Company
Material Plastic
Material Feature Food Safe
Number of Trays 5
Product Dimensions 9.9"D x 9.4"W x 7"H
Product Dimensions 9.92 x 9.43 x 7.01 inches
Shape Round
Temperature Range 158 Degrees Fahrenheit
Wattage 280 watts

3.5

9 Review
5 Star
70
4 Star
15
3 Star
7
2 Star
3
1 Star
6

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: remy
Works great to dry filiment
Just cut the supports out of the rings and it makes a great filament dryer. Set to 140 and in a few hrs your sloppy tpu is ready to use. You could probably make a ring to place the lid on pretty easy instead of cutting up the original pieces.
Scritto da: J.R.
It works
I was a little worried about the quality, but I’ve had it a few weeks, used it three times and it has been working great.
Scritto da: CJ McFalls
DIY 3D filament dryer!
I bought this to modify into a DIY 3D printer filament dryer. I had to cut all of the supports out of the shelves in order to fit a roll of filament, but this is a great, cheap, DIY alternative to the much more expensive dedicated filament driers. I can't speak to the function of this as a food dehydrator, but it's a great filament dryer!
Scritto da: Eric Witt
Size matters
Product worked well but when you have a stalk of bananas to dry it takes a few go-arounds
Scritto da: Elizabeth Brown
So far so good
Didn't expect it to be a small as it is but it works. So far so good
Scritto da: Peter Kwangjun Suk
So far, checks out as a 3D printer filament dryer
I've been running this for over two hours, with an oven thermometer in the modded chamber. Basically, I just put some corrugated cardboard and two layers of mylar bubble wrap insulation between one tray and the lid. (5" width. Takes about 31" length to make the cylinder.) I also ended up taping 4 of the 6 vent holes in the lid. The oven thermometer reads right at 50 Celsius, or 122 F, which is my target temperature. To get that, I ended up turning the knob just below the 140 degree mark. So temperature control isn't 100% accurate, but the temp seems to be stable. Adding the bubble wrap insulation seems to be a must. Before I added it, the chamber wall felt very warm, but with the bubble wrap, the outer temp feels not much more than room temp. Another 3D printer reviewer also used a cardboard chamber, but couldn't achieve his desired temperature. The increased surface area probably radiates heat away too fast for the heater to keep up. This makes me seriously question the value of this device as a food dryer, unless one makes a bubble wrap insulation couzy for the trays. Also, another reviewer talked about taping the vent holes up on the lid, after which some component melted. I think the blower/heater depends on airflow for cooling, so I wouldn't tape all of the holes up. In any case, I'm about to get my first filament spool to try drying it overnight.
Scritto da: Amazonuser5
Perfect for my use
I ordered this to dehydrate the lemons from my tree. So far I have found that using the temperature at 140 works well, but it takes two full days to get them completely dry. I don't mind the extra time as this helped them from turning brown. I have not tried on anything else... yet!
Scritto da: Morgan
Functional and good pricing.
Used this product for a few months now and it has been great! Does what it is supposed to do. Not the fanciest dehydrator but perfect for making a snack here and there.
Scritto da: K.
Wow, so happy with this dehydrator
This is the first dehydrator that I purchased mainly to make jerky since I am a big meat eater. The first day I made beef jerky, highest temp setting and in 3 hours it was ready to eat..so delicious. The next day I made porc jerky..just delicious!!! Rotate the trays every half hour or so so that everything dries evenly. I have been using it every day because I can't even keep the jerky around it gets eaten up too quickly no matter how much I make.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array