Кронштейны для лифта Summit Outdoors E1088, игровой домик из строительной стали, набор качелей, кронштейны для дома на дереве и подставки для оленей, 4x4 (набор из 4 шт.), черный

Brand:Elevators

3.8/5

235.30

Экономьте время с помощью наших составных угловых элеваторных кронштейнов E1088 4 x 4. Наши кронштейны для лифтов производятся в США и содержат на 30 % больше премиальной стали, чем у любого конкурента, а это означает, что они не только прочнее, но и рассчитаны на более длительный срок службы. Наши лифты спроектированы таким образом, чтобы выдерживать непогоду и выдерживать сильный ветер и низкие температуры, чего не могут другие лифты. Каждый 4x4 вставляет 5,75 дюйма для обеспечения максимальной безопасности и прочности. Наши сверхмощные стальные лифты 12-го калибра также имеют соединения, сваренные с помощью роботизированной сварки, и достаточно прочны, чтобы поддерживать самодельные игровые домики, платформы для качелей, жалюзи для оленей или отдельно стоящие настилы. Лифты спроектированы под углом 8°, что научно доказано как оптимальный угол для восприятия вертикальных нагрузок и предотвращения поперечного раскачивания. В своем следующем проекте используйте оригинальные и лучшие кронштейны, лифты, всегда сделанные в США. Включены 4 отдельных лифта E1088.

Сделано в США: мы являемся оригинальным и пользующимся наибольшим доверием поставщиком кронштейнов для подъемников для оленей. Создавайте лучше: наши многоцелевые кронштейны для элеваторов / подставок для оленей имеют угол 8 °, который, как научно доказано, является оптимальным углом для вертикальных нагрузок и предотвращает боковое раскачивание. Запатентованная конструкция: наши простые в использовании кронштейны для домиков на деревьях имеют предварительно просверленные отверстия для шурупов или болтов с квадратным подголовком и идеально подходят для строительства устойчивых игровых домиков, платформ для качелей, отдельно стоящих настилов или подставок для оленей. Надежная конструкция: Изготовленные из сверхпрочной стали премиум-класса 12-го калибра со сварными соединениями, наши элеваторы для оленей более чем на 30% прочнее, чем у конкурентов, и рассчитаны на любые условия. Многофункциональные кронштейны для лифта (4x4): из наших универсальных кронштейнов для стоек 4x4 можно сделать отличный домик на дереве, качели, смотровую башню и приподнятые кронштейны для жалюзи для оленей.
Age Range (Description) Adult
Age Range (Description) ‎Adult
Batteries Included? ‎No
Batteries Required? ‎No
Brand Elevators
Brand ‎Elevators
Color Black
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.8 4.8 out of 5 stars 989 ratings 4.8 out of 5 stars
Floor Length ‎8.4 Inches
Included Components ‎Set of 4 E1088 Elevator Brackets
Installation Method Free Standing
Installation Method ‎Free Standing
Is Discontinued By Manufacturer ‎No
Item model number ‎E1088
Item Package Quantity ‎1
Item Weight 24 Pounds
Item Weight ‎24 Pounds
Manufacturer ‎Elevators, LLC
Material Alloy Steel
Material ‎Alloy Steel
Number Of Pieces ‎4
Part Number ‎E1088
Pole Material Type ‎Wood
Product Care Instructions Hand Wash
Product Care Instructions ‎Hand Wash
Product Dimensions 8.4"L x 4"W x 11.7"H
Product Dimensions ‎8.4 x 4 x 11.7 inches
Product Dimensions ‎8.4"L x 4"W x 11.7"H
Recommended Uses For Product Hunting
Recommended Uses For Product ‎Hunting
Size ‎4 x 4
Sport Hunting, Outdoor Lifestyle
Sport ‎Hunting, Outdoor Lifestyle
Style ‎4 X 4
Warranty Description ‎Lifetime Warranty

3.8

12 Review
5 Star
86
4 Star
9
3 Star
3
2 Star
1
1 Star
2

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Devin Riles
Solid Construction
These elevator brackets are well made with thick steel. The welds are solid and it looks like these will hold plenty of weight for the deer stand I'm building. The only slight issue is that deep in the pocket where the plates attach to the 4x4 sockets, there is no powder coating and there was minor surface rust on the bare steel. A quick blast of rustoleum in the pocket should prevent and further corrosion. Otherwise, these are awesome.
Scritto da: disappointed
Best stand ever
Easy to install and then erect stand. With cross supports creates a very sturdy structure.
Scritto da: cw4usa
Great Value
Very sturdy construction and made building the new platform for my stand a breeze. When mounting the brackets, take great care in the sides that you mount them on. They will only work one way, properly. Mounted on the wrong sides, the force of the weight of your platform will try to pull the mounting board away from your intended connection...
Scritto da: Strawboss
Good product but has a small and neglible design flaw.
I did a very thorough www search to find the most suitable elevators for my stand. The ones I wanted were those which angled out in two directions ("compound angle") such that both sides of the platform corners got equal support. Some of those I found stated that they were built for the tower legs to be at a 15 degree angle outward from plumb. For my stand with 10' 4x4's I felt 15 degrees would result in an overkill spread between the posts at ground level. Meanwhile the descriptions for other elevators I found didn't state what the post angle was. For this set of elevators, the ones I bought, the Amazon description doesn't provide the post angle however both the manufacturer's website and the Home Depot's website state it's 8 degrees which is plenty adequate. They're also 12 gauge steel whereas some of the other brands of elevators are made of thinner material. To attach the elevators (those I'm reviewing) to your 2x6 the instructions call for carriage bolts to be inserted from the inside, through the wood member, with the nut on the outside. The only negative I found with these elevators is that inside vertical part of the elevator is too high and doesn't allow the carriage bolt head to clear it which is necessary for the bolt head to anchor into the wood. It's a bit of a struggle to work around this design mistake which the manufacturer could easily resolve. See photo below.
Scritto da: The BandMan
Decent
Priced a little high but worked great.
Scritto da: Amazon Customer
Awesome.
Awesome product.
Scritto da: Shepherd
Works great
Although I put them on two by fours with three-quarter inch plywood on the deck, they work great. Very sturdy and the best part is, they are made in the USA. This is going to be a elevated/heated deer tree stand.
Scritto da: boxer
excellent
Heavy-duty steel, easy to install.
Scritto da: Robert Snow
As advertised
These leg brackets are perfect for building a raised deer blind. They are strong and once 4”x4” legs are installed and secured as per the directions, there is no swaying. I would highly recommend
Scritto da: mario g.
Great product!
Awesome product! My elevated blind is all set up and crossbow deer hunting starts next Saturday, here is Quebec! Can't wait to get there.
Scritto da: David B.
excellent product
very sturdy and easy to set up. As advertized
Scritto da: Amazon Customer
good quality
Really good looks really nice

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array