OTC 4513 Набор из двух предметов для тяжелых условий эксплуатации, внутренних и внешних плоскогубцев для стопорных колец

Name: OTC 4513 Набор из двух предметов для тяжелых условий эксплуатации, внутренних и внешних плоскогубцев для стопорных колец
Brand: OTC
SKU: 0086000273262
Price: 194.94 EUR
Availability: InStock

Brand:OTC

3.7/5

€
194.94

Прочный выдувной кейс для хранения включает в себя дополнительные пары сменных наконечников диаметром 0,12 дюйма (3 мм): прямые, 45° и 90°. Внешние плоскогубцы способны снимать и устанавливать стопорные кольца диаметром от 3-1/2 дюймов до 6-1/2 дюймов (от 89 мм до 165 мм). Внутренние плоскогубцы способны снимать и устанавливать стопорные кольца диаметром от 3-1/16 дюймов до 6-1/4 дюймов (от 78 мм до 159 мм). Прочная конструкция со сменными наконечниками и пружинным храповым механизмом блокировки надежно удерживает стопорное кольцо. Клещи для стопорных колец из термообработанной стали для ремонта крупного оборудования имеют общую длину 16 дюймов с длиной ручки 12-1/2 дюйма — большие и прочные для самых тяжелых работ на тяжелом оборудовании.

Количество

добавить в корзину Купить сейчас

EAN: 0086000273262

Категории Tools & Home Improvement, Power & Hand Tools, Ручные инструменты, Клещи, Наборы клещей,

Brand	OTC
Color	Red
Handle Material	Alloy Steel
Item Dimensions LxWxH	17.3 x 13.4 x 2.7 inches
Item Weight	7.6 Pounds
Material	Alloy Steel
Specific Uses For Product	Hold,Locking

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: Jacob S.

Snap ring monster!

Look no further, these locking/ratcheting snap ring pliers are amazing for large snap rings such as wheel bearings. You don't even need to decompress the snap ring after removal, it can stay compressed in the pliers since they lock.

Scritto da: AZ

Worked with very stiff 2 1/4" ring on Case 580C backhoe

I had an old snap ring plier set that's like the $15 ones at O'Reily's. I know because I went there to see what they had--not better than I already had. The ones I had were bending the tips without getting a very stiff 2 1/4" ring off the backhoe. I ordered this OTC set. This OTC set worked well--no problem getting the rings off. People here, and the product description, mention this set is for large rings (3 1/2" - 6 1/8" external rings). But the rings I used it on was 2 - 2 1/4" external, and they worked well. I think the missing spec that might be helpful here is how far apart are the tips when they are as close as possible. There are several tips so this can vary slightly. But with the straight ones I used the minimum distance between the center of the tips is just about 5/16"--slightly less. This was for the external set. And I measured the same for the internal set (which I haven't had a use for yet). These also are right about 5/16" minimum tip center-to-center. My only problem I found was when I switched tips the screws to attach the tips had a tendency to cross thread. Use a little care and don't try too hard when screwing the tip screws. When you get them started right they thread in easily. By the way, the tips are 0.12" diameter and are very strong. They didn't bend at all, and my rings required quite a lot of force to compress--I even felt the force with the huge lever handles on this set.

Scritto da: Derrick

This tool set is a Godsend!

This tool set is WELL worth the money. The pictures don't do it justice. The quality and size made me realize I purchased the right tool for the job. I struggled for hours upon days trying to get the snap ring retaining clip into the steering knuckle of a 2006 Ford Explorer. I used regular snap-ring pliers from an auto parts store and a flat head screwdriver to get it out, but putting it back in was more of a challenge. When the standard snap-ring pliers wouldn't do it, I tried a pair of long handle bent nose pliers. Those gave me the leverage, but the tines barely made it into the holes of the snap ring. I could just about get the ring closed but as I tried to put it into place...PING!! it went flying. Out of shear frustration I searched for a better tool and came across this set. When the package arrived, I was surprised by the size and weight. I thought no way "pliers" could weigh this much. But when I opened the box, saw the case and opened the case, I KNEW this tool was going to do the job. Picking up the pliers and feeling the quality and weight, I just knew I was going to OWN that snap ring! I didn't even have to change the tines on it. The size of the tool gave me the leverage to squeeze this 4" snap ring with one-handed ease and the locking mechanism on it was such a relief! The ring went in so fast I thought something HAD to be wrong, but everything worked just right. I'm kicking myself for not getting this sooner.

Scritto da: James Montoya

Snap ring tooks

Work great for big jobs heavy duty work great.

Scritto da: Old Geezer

They easily weigh a couple pounds apiece

These are a lot larger than I expected. They easily weigh a couple pounds apiece. That being said, they are also very stout and will work well for removing inside and outside snap rings in larger diameters--approx. 2 1/2" to 6" or so. The tip diameters are approximately 1/8th inch (.125"). The different tips are held in place by 2 large screws, and are very strong. One advantage of this is that a person could make tips of his own for specialty uses. I like the feature that locks the snap ring in position--too many times I've almost had a snap ring out, only to have it slip off the tool and have to start over again. However, I gave it 4 stars because the ratchet arm on the lock feature prevents the tool from reaching inside snap rings that are more than 5 or so inches down from the surface--something often encountered when rebuilding transmissions, hydraulic cylinders, or spindles on machine tools etc. It also gets in the way when working in confined spaces. It would be nice if you could remove the ratchet arm when you need to reach rings deep inside a cylinder, etc., then install it again. In fact, I may do this anyway by drilling out the rivet that holds it in, and putting in a nut and screw instead. If it already had this feature, I'd give it a solid 5 stars.

Scritto da: Sabillon504

"The quality left me astonished, better than I expected"

I have used it a couple of times since I received it, I am more than satisfied, I did not imagine that they were so strong in appearance, they feel very good, they look very solid. The case they are in is also very good compared to the types of cases that are seen today, it has been a pleasant surprise and a very satisfactory purchase. I don't know if there are better ones, but this one is more than good.

Scritto da: Joe H.

A Little Expensive, but Well Built

Removed some stubborn, rusted-in wheel bearing retaining clips without much drama. The tips seem pretty strong for as skinny as they are; they didn't seem to mind me prying with them in ways they probably weren't designed for. I also like how replacement tips are available separately, many other brands (especially those with cheaper build quality) will make you buy the whole tool all over again.

Scritto da: Eli

Good quality for the money

Works good for the size I needed at work. Just be sure not to let the big snap rings roll the tips.

Scritto da: Amazon Customer

Good Quality Product

I have not had a chance to use yet as I ordered and when they arrived were to small for my intended purpose. They look quite sturdy though.

Scritto da: Rod

Good quality

Best price I found

Scritto da: Jon c

Heavy duty

Excellent

Scritto da: gak24

Snap ring pliers that work on large snap rings

Did exactly what I was looking for. easily worked with 3 inch stiff snap ring for bmw making the job of removal and installation for multiple wheel bearings safe and trouble free. Would highly recommend.

Scritto da: Mike

Better than what the shop

Heavy duty. Better than what the shop had