OTC (522 Большой съемник для шестерен и шкивов

Brand:‎NOCO

3.8/5

136.19

С помощью большого съемника шестерен и шкивов OTC 522 вы можете легко снимать широкий спектр шестерен, шкивов и других деталей с резьбовыми отверстиями. Он прост в использовании и удобен в хранении. Ценность лежит в основе портфеля безрецептурных инструментов и оборудования. Будь то простой ремонт или самая сложная проблема с управляемостью автомобиля, эти отмеченные наградами инструменты повсеместно решают проблемы быстрее и с меньшими затратами, чем любая другая доступная линейка продуктов. Будь то специальный инструмент или уникальное сервисное оборудование, OTC предлагает лучшие решения для современных задач автомобильного обслуживания, повышая при этом производительность техников и прибыль магазина.

EAN: 0031113145821

Категории Automotive, Tools & Equipment, Тягачи, Наборы съемников,

Аналогичен Ford D80L-522-A и 303-D025. Подходит для любого винта с головкой диаметром до 1/2 дюйма. Нагнетающий винт имеет длину 3/4 дюйма-16 x 11-5/8 дюймов. Распространение от 2 дюймов до 7-3/4 дюймов; блок имеет ширину 8-1/4 дюйма. С помощью большого съемника шестерен и шкивов OTC 522 вы можете легко снимать широкий спектр шестерен, шкивов и других деталей с резьбовыми отверстиями.
Brand ‎NOCO
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 363 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎522
Item Weight ‎4.1 pounds
Manufacturer ‎OTC
Manufacturer Part Number ‎522
Model ‎OTC
OEM Part Number ‎522
Product Dimensions ‎3.1 x 2.2 x 13.2 inches

3.8

13 Review
5 Star
86
4 Star
8
3 Star
3
2 Star
1
1 Star
2

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Amazon Customer
geat tool
good tool
Scritto da: KSBird2005
Tough.
This is a great option for pulling motors and gearboxes off of shafts. Using gear pullers never worked well for this application due to uneven shapes and lack of grab area. With this I can just grab a couple bolts and pull off very stubborn motors.
Scritto da: F. Rotello
Good Puller
I read some of the 1 star reviews and honestly I can not see what they were complaining about. This tool cost me $60 and is WAY better than a $10 one you buy at "China-Tools-R-Us"... if you get my meaning. The Tool is square and the bore is straight, NONE of the $10 pullers will share those traits. Yes the threads are a little rough, however all you have to do is put a little oil on the threads and spin the extractor rod all the way through and it will smooth it out. If you want flawless go buy an Enerpac a $200 to $300, that's what my Industrial service company uses. Otherwise your lawnmower flywheel will never know the difference. This is a great tool for a homeowner or auto shop.
Scritto da: Amazon Customer
Must have tool
I use this puller for all sorts of task.
Scritto da: Mike Asher
Heavy Duty Gear puller
I attached this puller and about 1 good Complete turn it literally jumped off the shaft
Scritto da: Scott Whitehead
Good puller.
Cheaper than Snap-On and seems to be the same quality. I use it at least once a week pulling differential yokes on tractor trailers to do pinion seals.
Scritto da: Gary E. Hoenig
Did the tough job
Did the tough job after I had tried everything else. Glad to have this tool in my arsenal.
Scritto da: Matthew Rushing
Indestructible puller
Used it to pull the blade holder assembly off a 285 Bush Hog mower. Had tried everything, even a 12 ton hydraulic puller wouldn't budge it. Rigged this up to it using a couple of Grade 8 1/2 inch bolts, using a 1 inch air hammer (this thing has like 2500 lbs. of torque), heat, and a 10 lb. maul finally broke it loose. Bent the bolts, pulled the 1/2 inch nuts right off the threads, but this puller didn't break and to my amazement the puller bolt didn't even bend. Best 50 bucks I ever spent.
Scritto da: MCatSHF
100%!!! HAPPY HAPPY HAPPY!!! Exactly as described, priced right & fast shipment.
100%!!! HAPPY HAPPY HAPPY!!! Exactly as described, priced right & fast shipment.
Scritto da: Amazon Customer
great tool
right tool for the job. worked great time saver
Scritto da: Randy Frattinger
Good Quality
The tool is as described and works great.
Scritto da: Evan
Works well
Performed as needed. Would be nice to have a swivel end on the threaded rod
Scritto da: Doug Burton
Built for tanks
Wow.... what a beast. If this doesn’t work. Nothing will...

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array