POWERTEC 70214 1-1/2 Двойной хомут для шланга

Brand:POWERTEC

3.5/5

27.54

Html 1-1/2 дюйма с двойной проволокой Зажим для шланга powertec. Эти зажимы предназначены для быстрого и надежного крепления пылесборника к фитингам для сбора пыли.&Nbsp; Независимо от того, начинаете ли вы собирать свою систему пылеулавливания или нуждаетесь в сменных хомутах для шлангов, эти 1,5-дюймовые хомуты для шлангов являются важным инструментом для соединения трубопроводов с заслонками, пылеуловителями и фитингами. Простота в использовании, просто затяните эти хомуты поворачивают винт с помощью крестообразной отвертки или шестигранного ключа. Двойная эффективностьОни имеют стальную пружинную конструкцию с двойной петлей, специально разработанную для обеспечения впечатляюще плотного захвата шлангов соответствующего размера, фиксируя их на месте, сохраняя при этом постоянное давление.характеристикиматериал : углеродистая сталь зажимная способность: 1-1/2” ~ 1-3/4” отделка: цинковое покрытиеpowertec – американский производитель высококачественных деревообрабатывающих станков, аксессуаров для деревообработки и широкого ассортимента запасных частей OEM. Мы стремимся превзойти ожидания, привнося в отрасль лучшие инновации, технологии и разработки продуктов.

Нет доступных единиц
Простота в использовании: просто отпустите и затяните винт, чтобы отрегулировать диаметр зажима. Функциональность: 1-1/2-дюймовые кольцевые хомуты для шлангов, разработанные для обеспечения надежного и гибкого соединения труб с пылезащитными колпаками, заслонками и другими приспособлениями для сбора пыли. Качество: прочный, герметичный и устойчивый к коррозии инструмент для зажима шлангов Изготовлен из высококачественной нержавеющей стали, обеспечивающей долговечность. Применение: эти углеродные двойные хомуты с цинковым покрытием идеально подходят для резиновых и ПВХ шлангов и прекрасно работают с системами сбора пыли со спиральной проволокой, промышленными пылесосами или даже со шлангами насосов для бассейнов. Включает: 1,5-дюймовые двойные хомуты для шлангов – упаковка из 5 шт.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Color Golden
Color ‎Golden
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 425 ratings 4.5 out of 5 stars
Included Components ‎hose clamp
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 4 x 5 x 1 inches
Item model number ‎70214
Item Package Quantity ‎1
Item Weight 0.24 Pounds
Item Weight ‎3.84 ounces
Manufacturer ‎POWERTEC
Material Carbon Steel
Material ‎Carbon Steel
Measurement System ‎Standard
Part Number ‎70214
Power Source ‎NOPT APPLICABLE
Product Dimensions ‎4 x 5 x 1 inches
Size ‎1-1/2-Inch
Style 5 pack
Style ‎5 pack

3.5

12 Review
5 Star
69
4 Star
19
3 Star
7
2 Star
2
1 Star
3

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Peter
Good clamp, but not as good as work clamps for smooth OD
This works best for currogated hose. It will fit right between the coils. For flexible smooth hose, this will move and worn clamps are what you need. Only issue is sometimes the screw will get obstructed and it will be a pain to tighten.
Scritto da: Jim S.
Must Have for Pool and Spa Hose
I had no idea that a special clamp was needed on the pool/spa hose! I bought the hose at a my local hardware store and didn't see any of these in that area so I bought the normal hose clamp. I had a custom job with the pool/spa hose and everything seemed to be fine, no leaks. About a month later, I found water at both ends of the hose. The water worked its way trough the hose spiral! I quickly looked online and found these and after looking at them and reading others reviews, I knew these would solve my problem. Easy install and not one drip of water since they were installed.
Scritto da: David P.
Clamp does the job
Time will tell how long they last, even coated rust showing already
Scritto da: Sammy Farha
POWERTEC 70214 Double Wired Hose Clamps
POWERTEC 70214 Double Wired Hose Clamps. These double-wired hose clamps work much better than the traditional silver hose clamps. Great camps. Tip - get a ratchet screwdriver with a nutter attachment for these hose clamps. You can pick them up on Amazon for $10 to $20. The nutter screwdriver works much better than a flat head or Phillips screwdriver.
Scritto da: beast
Not a leak in sight
I'm using these instead of the "band" type of hose clamp in my pool hoses. Band clamps are irritating because they strip too easy. Not these! Solidly made and no BS tightening these down. I had to use 2 band clamps to assure no leaks every year. I replaced all of the connections with 1 of these and that's all I need. Wire clamps can be hard to find. I am so glad I found these.
Scritto da: Jim D.
Works great, but spray them with a little oil to prevent rust and corrosion
These work great, but they do get corroded. Spray them with oil or lithium grease to prevent corrosion and they'll last longer.
Scritto da: Amazon Customer
Good product
Work great for pool hoses.
Scritto da: Woofe Kutz
Best ever
easy to use
Scritto da: Pessoa Emanuel
Parfait
Parfait
Scritto da: Pete Wanner
just exactly as promised
just what they promised
Scritto da: jaret earle
These 1 1/2 inch won’t fit 1 1/2 pipe you will need to order larger .
There hose clamps are not big enough for a 1 1/2 inch pipe you will need to order larger
Scritto da: happy customer
No problem
No problem

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array