Стальная подставка для двигателя BIG RED AT37912 Torin с вращающейся на 360 градусов головкой и складной рамой: грузоподъемность 3/4 тонны (1500 фунтов), красная подставка для двигателя 3/4 тонны (1500 фунтов)

Name: Стальная подставка для двигателя BIG RED AT37912 Torin с вращающейся на 360 градусов головкой и складной рамой: грузоподъемность 3/4 тонны (1500 фунтов), красная подставка для двигателя 3/4 тонны (1500 фунтов)
Brand: ‎BIG RED
SKU: 0615268268910
Price: 503.35 EUR
Availability: InStock

Brand:‎BIG RED

3.3/5

€
503.35

Произведения искусства для вашего сада, патио или двора. Двусторонний садовый флаг из двух кусков полиэфирной ткани. Этот двухслойный флаг садового размера водонепроницаем и защищен от непогоды. Он выдержит ветер, дождь и снег. Сделайте свое личное заявление в своем внешнем декоре с этим красочным качественным садовым флажком.

Нет доступных единиц

EAN: 0615268268910

Категории Automotive, Tools & Equipment, Гараж и мастерская, Подъемники для автомобилей, Подъемники и домкраты, Моторные подъемники и подставки,

Механизм быстрого складывания позволяет сэкономить место, когда он не используется во время хранения в гараже или мастерской. Подставка для двигателя имеет грузоподъемность 3/4 тонны (1500 фунтов) и оснащена (2) фиксированными роликами и (3) поворотными роликами на 360 градусов для плавной маневренности. Монтажная головка оснащена (4) регулируемыми рычагами и вращением на 360 градусов, что обеспечивает легкий доступ к любой части двигателя; Надежно удерживает большинство блоков двигателей зарубежных и отечественных производителей. Вращающаяся подставка для двигателя изготовлена из сверхпрочной стали, обеспечивающей длительный срок службы и промышленный блеск; Очень широкое основание обеспечивает максимальную устойчивость.

Brand	‎BIG RED
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 151 ratings 4.3 out of 5 stars
Item model number	‎AT37912
Item Weight	‎84.7 pounds
Manufacturer	‎Torin
Manufacturer Part Number	‎AT37912
Model	‎Torin BIG RED Steel Rotating Engine Stand with 360 Degree Rotating Head and Folding Frame: 3/4 Ton
Product Dimensions	‎8.26 x 7.28 x 10.62 inches
Special Features	‎Locking engine tools, Engine stand 2000 lbs, Rotating engine stand

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: Blair Weiss

Works and decent price

I was thrilled at the stiffness of this stand. I didn't know what to expect, so I expected the worst and was pleasantly surprised. I like the folding legs, so when I am not using it, it will take up less space.

Scritto da: Fern

Nice and sturdy

Held my L.S. Engine no problem

Scritto da: roger

worked great

I had to make different standoffs for the tractor engine that I was working on, but it worked great for an engine stand.

Scritto da: thomas sims

Sturdy

This engine stand holds a completely built diesel engine from a medium duty truck. Stand has little to no flex when rolling engine around the garage. I do have a jack stand under the front of motor just for reassurance.

Scritto da: Question Everything

A bit pricey for what it is an where its made.

I got this for an engine I just acquired, it was easy to assemble with simple tools very heavy material, once assembled it was very easy to roll as to my other stand the quality of welds are very good fit an finish aren't all that for the price it fits together fine a little loose an wondering how this will age with lots of use down the road. The actual finish has a lot to be desired, paint was missing an flaking off most of the assembled areas giving the welds look good they are rough an personally thing for the price more smoothing of the edges an jointed areas. Would I recommend, YES! Would I buy it again, Yes, but for the price I'd expected better fit an finish. Personally I think it should be $125. Less in price.

Scritto da: Sandy

used with a BBC 454 CID mark IV

had my BBC 454 mounted for about two months while I replaced seals and did general refurb. need two people to rotate engine upside down safely, but the stand was stable and had no sag whatsoever after two months of being mounted. It is a bit tricky to transition the engine to and from the stand with a standard engine lift. need to turn the engine stand at an angle to get the right alignment. overall very happy with product.

Scritto da: RetiredEngineer

Operational engine stand exceeds my expectations

It was packaged and delivered with one problem. It was too damn heavy. LOL It was not too hard to assemble. I wished the pin to keep it from rotating with engine mounted was long enough to go through the entire barrel. It would make me feel safer. My F150 302 ci engine went on with no major issues. It folds up very easy to store in the corner of the garage.

Scritto da: B.Alvarez

I would have rated it higher but my stand had 1 HUGE manufacturing defect.

It’s a decent stand for the price, but they need to fine tune their quality control. The shorter steel arm that the casters attach to wasn’t completely drilled through. It had two holes drilled on one side, but the holes were missing from the opposite side for the bolt to pass through. Most mechanics should have the tools to fix this, but it's not something you should be expected to.