Устройства управления-M2525-1WA Латунный шаровой обратный клапан, 1/4 NPT с наружной резьбой 1,30 дюйма M2525-1WA

Name: Устройства управления-M2525-1WA Латунный шаровой обратный клапан, 1/4 NPT с наружной резьбой 1,30 дюйма M2525-1WA
Brand: Control Devices
Price: 28.23 EUR
Availability: InStock

Brand:Control Devices

3.5/5

€
28.23

L-образный дизайн панели. Компоненты или элементы управления могут быть установлены на любую поверхность. Изготовлен из алюминия. Натуральная отделка. Измеряет 5 ширины на 2 высоты и 4 глубины.

Количество

добавить в корзину Купить сейчас

EAN:

Категории Industrial & Scientific, Гидравлика, пневматика и сантехника, Фитинги, Клапаны, Контрольные клапаны,

Максимальное номинальное давление 250 фунтов на квадратный дюйм и максимальная рабочая температура 250 градусов по Фаренгейту. Внутренняя и наружная резьба NPT для соединения труб с разными концами. Уплотнительные кольца из фторуглерода для более высокой термостойкости и химической стойкости. Латунь для коррозионной стойкости, пластичности при высоких температурах и низкой магнитной проницаемости. Может использоваться в качестве обратного клапана резервуара для небольших компрессоров или в качестве компонента пневматических контуров.

Brand	Control Devices
Exterior Finish	Aluminum,Copper,Plastic,Steel
Inlet Connection Type	National Pipe Tapered
Item model number	M2525-1WA
Manufacturer	Control Devices
Material	Brass
Number of Ports	2
Outlet Connection Type	MNPT
Package Dimensions	5.2 x 5 x 0.4 inches; 1.44 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: Shawn Samples

Works great!

Excellent quality!

Scritto da: John T. Ertz

Good inexpensive check valve for a home shop compressor

Bought two of these as I have twin air compressors plumbed into one air line and they have been in use for well over a year now with no issues.

Scritto da: Kenneth Alexander

The ball and spring came out in my air line.

Didn't work but a day. Probably just a defective one that slipped through. I bought 2 and the bigger one is working great.

Scritto da: David Le

Must have when retro fitting portable air compressors to a three-way manifold

A lot of people go off road camping and buy portable air compressors. It is now a trend to retrofit them with a pressure switch and manifold so that you can run traditional air fittings and inflator. But too many people overlook this check valve because without it quite a large number of compressors tend to leak back to the Head because they were not meant to be perfectly airtight. This will resolve the problem with leaky portable compressors and will hold the pressure from leak back.

Scritto da: marty lappin

Works well for the price

I’ve used this in a few places before for air control, this time was a slightly different application. This time I used it as a fuel check valve in top of my fuel tank for a diesel standby generator I’ve refurbished. Fuel was flowing back into the tank on its own if it sat long enough which led to a long prime time. I removed the inner spring with a o-ring pick and installed so gravity closes the check valve. So far is working perfectly for that.

Scritto da: Brad

Does what I needed

Works well and provides a full stop back-flow gate with no detectable leakage.

Scritto da: rockie

Solid built

Haven't used it yet but seems like it's quality built

Scritto da: Kindle Customer

Perfect for use on my remote aux air tank.

Just what I needed for a fill port on my 40 gallon auxiliary tank for my air compressor. I built an remote aux air tank out of an old gas water heater tank to use as a secondary remote tank for my 4hp air compressor. Fitted the tank with regulator, dryer, oilier, safety valve, tank gauge & regulator gauge, dump valve for water drainage, and needed to make a fill port. I was using a small manual valve which soon became a PITA having to remember to open and close it when filling. My old original tank on the compressor leaks, so wanted to be able to shut the aux tank off also so it wouldn't bleed back through the leaky original tank. So, I chose this check valve to replace the manual fill valve. Works very well, and was sufficiently fast enough to fill the 40 gal aux tank. Filled it from zero to 110 psi in about 5 minutes, so that is good enough for me. Seems to hold well for now. Seems to be well made.