uxcell a15072400ux0462 M6x15 мм, метрическая плоская головка, заклепка, гайка, вставка, Nutsert, 30 шт., упаковка из 30 шт.

Name: uxcell a15072400ux0462 M6x15 мм, метрическая плоская головка, заклепка, гайка, вставка, Nutsert, 30 шт., упаковка из 30 шт.
Brand: uxcell
SKU: 0712662293477
Price: 38.12 EUR
Availability: InStock

Brand:uxcell

2.6/5

€
38.12

Описание: Винты с плоской головкой, диаметр внутренней резьбы M6, общая длина 15 мм, оцинкованная поверхность, заклепочная гайка из углеродистой стали. Этот Nester имеет большой фланец для обеспечения повышенной прочности в перфорированных и просверленных отверстиях. при установке в мягкие материалы..

Количество

добавить в корзину Купить сейчас

EAN: 0712662293477

Категории Industrial & Scientific, Гвозди, Винты и крепеж, Гайки, Крепежные гайки,

Размер фланца (dk*k): 12x1,3 мм/0,47x0,05 (D*толщина); Шаг резьбы: 1 мм. Диаметр корпуса (d): 9 мм/0,35; Размер отверстия приложения (d0): 7,5 мм/0,3. Общая длина (Д): 15 мм/0,6. Вес: 107 г; Комплектация: 30 х заклепок. Размер резьбы: (D) M6/0,24; Название продукта: заклепочная гайка; Материал: углеродистая сталь, оцинкованная.

Is Discontinued By Manufacturer	No
Item model number	a15072400ux0462
Manufacturer	uxcell
Product Dimensions	3.15 x 1.57 x 0.79 inches; 0.01 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: Davette L. Johnson

Four Stars

My husband said he liked them. Thank you.

Scritto da: Andrew Godsey

Thread pitch is off

The thread pitch is not 1. I have two different brands of m6-1.00 and I'm lucky to get any of them in a full turn.

Scritto da: mike

Works for a roof rack.

We removed a roof rack from a 2006 Dodge Caravan. The FACTORY method that the roof rack was attached was with these 6mm rivnuts. We measured the donor van as to where the first rivnut was located (inches back from top of windshield). We drilled ten 11/32" holes using the existing holes in the roof rack after a tiny pilot hole was drilled in the center of each hole first. There is an easy way to install them with just a few pieces of hardware, just google "How to put rivet nut or threaded insert without special tools".

Scritto da: Earl F. Harmon

These are neat!

I have no idea why I didn't know about these years ago. Larger ones held my Jeep's skid plate on the frame where it is impossible to use a normal nut. I used these smaller ones to bolt the small rear bumperettes onto my '71 Land Cruiser. My wife couldn't even get her little hands behind the frame with a nut. These install from the front and expand as they pull down with a special tool and lock in place. I don't have the tool, so I used a washer and castle nut. (Look online for instructions). In total, these are great, and Amazon is the best place to buy them.

Scritto da: Amazon Customer

exactly what i ordered and good value

exactly what i ordered and good value

Scritto da: Amazon Customer

Perfect fit however, additional tool required.

Perfect solution to complete LR2 sidestep installation.

Scritto da: McDearmid,W

These are the handiest little fasteners I have ever used!

I used something similar in a manufacturing/fabrication company I worked for years ago. They're awesome for tinkering around, inventing, etc. My only complaint would be that they took too long to get here.

Scritto da: Ernest Buckler

Excellent product, be sure to test on scraps for ...

Excellent product, be sure to test on scraps for grip length. Parts must be held tightly together or riv-nut can expand between the pcs.