Yes4All Вертикальный настенный держатель для олимпийских штанг, стеллаж для хранения штанг, подвесная стойка для штанги для домашнего оборудования для фитнеса C. Настенный держатель для штанги - 1 бар

Brand:Yes4All

3.9/5

49.87

Если вы хотите освободить свое ограниченное тренировочное пространство для более организованного внешнего вида, приобретите высококачественный настенный держатель для штанги Yes4All и посмотрите, как он работает в вашем домашнем спортзале. Аксессуар для хранения штанги, компактный настенный держатель для штанги Yes4All изготовлен из стальной основы толщиной 4,5 мм с черным лакокрасочным покрытием, чтобы стоять годами без коррозии или разрушения. Мягкая пластиковая подкладка из UHMW обеспечивает устойчивость и надежность руля, а также помогает предотвратить любой резкий контакт со стержнем, когда вы устанавливаете его на вешалку. Расстояние 1,16 дюйма (30 мм) между перекладинами стойки для подвесного грифа достаточно велико, чтобы вместить традиционные штанги диаметром от 25 до 28 мм. БЫСТРАЯ НАСТРОЙКА ДЛЯ ЛЕГКОГО ИСПОЛЬЗОВАНИЯДа4Верх с настенным держателем для штанги обеспечивает удобство, организацию и безопасность для любого свободного зона силовых тренировок. Благодаря универсальной конструкции с расстоянием между отверстиями для винтов 2, 12 и 2 дюйма подвеска для штанги Yes4All совместима с деревянными шпильками диаметром 12, 14 и 16 дюймов. Вы также можете закрепить вертикальную стойку для штанги на бетонной стене с помощью винтов и настенных анкеров. Примечание: настенные анкеры не включены в этот комплект. ХАРАКТЕРИСТИКИ ПРОДУКТА * В комплект входит 1 вешалка из прочной стальной перекладины и 4 шурупа для крепления к дереву * Материал: сталь * Грузоподъемность: 200 фунтов * Вес изделия: 6,61 фунта * Цвет: черный * Расстояние между отверстиями: 2-12-2 дюйма * Совместимость с деревянными шпильками 12, 14 и 16 дюймов * Толщина стальной пластины: 4,5 мм * UHMW набивка пластиковый слой для защиты штанги * Отлично подходит для использования с грифами для тяжелой атлетики, силовыми грифами, грифами для сгибания рук, изогнутыми подъемными грифами и другими специальными олимпийскими грифами ГАРАНТИЯ 1 год гарантии и 60-дневный возврат

ЭКОНОМИЯ ПРОСТРАНСТВА, ЭКОНОМИЯ ВРЕМЕНИ: стойка для хранения штанги не только защищает ваши штанги, но и делает область более аккуратным местом для упражнений, это поможет сэкономить усилия на фактической тренировке, а не тратить время на уборку. БЫСТРАЯ И ПРОСТАЯ УСТАНОВКА: в упаковке есть руководство по установке вертикального держателя штанги, шаги просты вместе с необходимым оборудованием, поэтому у вас может быть хорошее место, предназначенное для штанг. ДОБАВЛЕННАЯ PE КОНТАКТНАЯ ТОЧКА: Изделие оснащено полиэтиленовой подушкой, которая значительно снижает шум и обеспечивает лучшую защиту ваших штанг, гарантируя, что они не будут царапаться каждый раз, когда вы кладете их на стойку. ЭФФЕКТИВНЫЙ РАЗМЕР: размеры 1 держателя стержня составляют 3,1 x 3,9 x 3,9 дюйма, 2 держателя стержня составляют 6,3 x 3,9 x 4,8 – ДхШхВ; Компактный дизайн можно установить в любом месте дома или на тренировочной площадке; Подходит для различных поверхностей, включая стену, камень, цемент. ВЫСОКОЕ КАЧЕСТВО: наша стойка для органайзера для тренажерного зала отличается высоким качеством для максимальной долговечности, что необходимо для ваших драгоценных штанг; изготовленный из превосходной нержавеющей стали по стандартам США, он может удовлетворить ваши требования к аккуратному домашнему спортзалу.
Brand Yes4All
Brand Name ‎Yes4All
Color ‎Black
Customer Reviews 4.8 4.8 out of 5 stars 483 ratings 4.8 out of 5 stars
Item Package Dimensions L x W x H ‎5 x 4.76 x 4.13 inches
Manufacturer ‎YES4ALL
Material Aluminum
Material ‎Aluminum
Number of Racks 1
Package Weight ‎0.56 Kilograms
Part Number ‎CNH9
Style C.Wall Mount Barbell Holder - 1 Bar
Style ‎C.Wall Mount Barbell Holder - 1 Bar

3.9

13 Review
5 Star
85
4 Star
11
3 Star
3
2 Star
1
1 Star
1

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: CL
Not well designed for 12" on center studs
My wall has studs that are 12" on center distance. That means for the unit you use the 4 inner holes which are in the "Hum" plastic pad. Since they did not provide a large enough hole in the plastic for the lag bolt plus washer to clear the surface of the plastic, the head of the bolt sticks out beyond the plastic. This means that bars in the 2 outer slots collars will hit the lag bolt heads. Not a great idea as this will scratch up the collars. I may try to tear this appart and drill the plastic out but for now I am not using the 2 outer slots and have some duct tape over the bolt heads.
Scritto da: Ty
Nice, as advertised
Great, exactly what I was expecting. Heavy duty, and weighs a lot. Nice holes for different stud lengths. Only small gripe is that it’s black and the silver bolts stick out like a sore thumb, so I plan to sharpie them.
Scritto da: Gary Bennett
Great little bar holder
Needed a short bar holder for the space I was going to install it. This works perfect. Has plastic to protect the bar where it hangs in the bracket.
Scritto da: Family No. 5
Well Worth It
This thing is a tank. There isn't much else to say other than it's going to hold up your bars which looks much better than them laying on the ground. The tricep bar doesn't fit in there super great but not bad if you turn it slightly.
Scritto da: Emily
Solid, Simple Mount
Love this mount. Needed a single mount for my Rogue Ohio bar. This one fit the bill perfectly. Solid construction and keeps the bar off the wall at the bottom. Very happy with my purchase.
Scritto da: Adam
Amazing bar hanger for the price
I need 4 bar wall hanger, and have other Yes4All products that have been great so I went for it. It was well packaged, it's very heavy duty, and looks great compared to more expensive companies. Install took maybe 10m. Others that have complained about the bolts weren't doing it right. It's super easy, and very sturdy straight into the stud. Currently have a curl bar, Rogue Ohio Bar, Rogue OPB hanging from it. Would easily work with a SSB also.
Scritto da: Christopher
Sturdy, easy barbell storage
I used to have a name brands vertical bar storage but that involved lifting and setting the barbell into a tube on the ground. I wanted something that went on the wall and the bars slid into easily. Hence when I found this I was excited. I have three barbells as of now (two mens olympic bars and a womens olympic bar) and this holds great. I have it hung on a stringer between two studs and it is rock solid. Easy to remove and put back in barbells which is great after a hard lifting session. Will purchased another with the next barbell I get.
Scritto da: Yen
Best barbell rack
Solid product. No instruction but installation is pretty easy. Much cheaper than other big brands but the quality is great. Pretty happy with the purchase.
Scritto da: Amazon Customer
Best bang for the buck
Compared to other wall-mounted barbell holders, this is probably the best bang for the buck. If you’re feeling uneasy about the supplied hardware, it’s fairly simple to grab some lag bolts from a hardware store (I installed it with the supplied bolts with no issue). However, the holder itself is solidly built, with a very thick layer of UHMW plastic on the bottom, something that other more expensive holders lack
Scritto da: Jill
Goood
Great
Scritto da: Jeremie Vincent
Sturdy
I love it, it is sturdy and it fits my needs perfectly!
Scritto da: Chris
Fantastic quality storage solution. Cheapish bolts
Great unit! I saw one comment about the lag bolts being pretty iffy and have to agree. The lag bolts are no where near what you would get at a local hardware store. They feel light and cheap. However, I didn’t have any issues using them in my install (no stripping using a Phillips head or socket). This would be a 5 star if the lag bolts were higher quality but overall this is still a great unit and I would recommend it.
Scritto da: James W Dalby
Easy to install
Quick & Easy to install, predrill your holes a bit smaller first will help with getting the screws tight on wood, if you are doing it on concrete, drill a small 2x4 to the wall with some tapcons, then drill the provided screws in after pre-drilling, nice and tight easy pezy.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array