BORA simtkāju saliekamā galda virsma Bora simtkāju darba stendam zāģa zirgiem — 24 collas x 48 collas — iekļauta koka virsma + 6 ātri pagriežamas slēdzenes pārnēsājamam, ātri uzstādāmam darba galdam vai darbagaldam, CT22N brūns

Name: BORA simtkāju saliekamā galda virsma Bora simtkāju darba stendam zāģa zirgiem — 24 collas x 48 collas — iekļauta koka virsma + 6 ātri pagriežamas slēdzenes pārnēsājamam, ātri uzstādāmam darba galdam vai darbagaldam, CT22N brūns
Brand: Bora
SKU: 0878258007894
Price: 227.12 EUR
Availability: InStock

Brand:Bora

3.5/5

€
227.12

Iegūstiet visas iespējas no Centipede® darba statīva, izmantojot CT22N Centipede Solid Tabletop — izstrādāts, lai pārvērstu jūsu Centipede® par ideālu daudzfunkcionālu darbstaciju. Stabila un izturīga, šī lieljaudas augšdaļa droši piestiprina pie Centipede® P-tops ar sešiem viegli lietojamiem pagriežamiem rokturiem, tāpēc jums nav jāuztraucas par darba virsmas izslīdēšanu no projekta apakšas. Viegli transportējams un uzstādāms, CT22N ļauj ērti nokļūt darbā, lai kur jūs atrastos.

Nav pieejama neviena vienība

EAN: 0878258007894

Kategorijas instrumenti un mājokļa labiekārtošana, Būvmateriāli, Materiālu pārvietošana, Darba galdi,

Var būt nepieciešamas vairākas virsmas: atkarībā no jūsu Centipede darba statīva izmēra, lai pilnībā pārklātu, jums var būt nepieciešama vairāk nekā viena galda virsma. Modelim CK6S ir vajadzīgas 1, CK9S ir 2, CK12S ir 3 un CK15S ir 4 galda virsmas. Iepakojuma saturs: Iepakojumā ir 1 simtkāja galda virsma un 6 ātri pagriežami fiksatori, lai piestiprinātu augšdaļu pie Centipede Work statīva. Iestatīšanas instrukcijas ir skaidri uzdrukātas uz kastes kopā ar attēliem. Ērta transportēšana: galda virsma ir eņģes centrā, lai to varētu viegli transportēt un uzglabāt, un tai ir pārnēsāšanas slots, lai jūs to varētu turēt vienā rokā, vienlaikus paturot otru roku brīvu. Papildu somas piederums ir pieejams iegādei ērtam uzglabāšanas un transportēšanas risinājumam. Cieta darba virsma: Centipede galda virsma ir 18 mm bieza, un tai ir cieta gluda virsma, kas ir ideāls darba galds jebkuram darbam vai projektam!. Top It Off: CT22N simtkāju galda virsma darbojas ar visiem simtkāju statīviem. Pilni izmēri ir 24 x 48 (610 x 1200 mm), un tas var izturēt līdz 2000 mārciņām (907 kg). Izveidojiet izcilo darbstaciju: neatkarīgi no tā, vai pārvietojaties no vienas darba vietas uz otru vai veicat DIY projektu savā garāžā vai mājās, šī pārnēsājamā, salokāmā simtkāja galda virsma atvieglo darba vietas iestatīšanu un nojaukšanu.

Assembly Required	‎Yes
Base Type	‎Casters
Batteries Required?	‎No
Brand	Bora
Brand	‎Bora
Color	Brown
Color	‎Brown
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 112 ratings 4.4 out of 5 stars
Finish	‎Wood
Finish Type	Wood
Finish Type	‎Wood
Included Components	‎Table Top and 6x Quick Twists
Item model number	‎CT22N
Item Package Quantity	‎1
Item Weight	27.5 Pounds
Item Weight	‎27.5 Pounds
Load Capacity	‎2000 pound
Manufacturer	‎Affinity Tool Works
Material	Wood
Material	‎Wood
Package Dimensions	‎29 x 26 x 3 inches
Part Number	‎CT22N

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Lisa Baltierra

Good addition

This is a good addition for a little shop or DIYers. Backs up well, fits perfectly with the Bora base. The only thing is that it isn't be sealed so it can't get wet. Spilled some water on mine and it stained the top. Not enough water to damage it though. I was lucky I caught it in time.

Scritto da: Sailor

Table Top

I decided to try BORA’s folding table top and it certainly meets the design requirements. However, I’m 70 and it’s heavy to handle and you must be careful when folding it. The best way to open it is like a book, with the hinges to your left or right. This way you can control it and avoid possible damage to the hinges or fingers. It’s very sturdy and is easy to secure to the BORA legs. I was using a 4x4 piece of half inch plywood which works well too, but spent the money to buy their table top. It’s more expensive than it should be IMHO, but I like the idea of folding for portability. If I was still working in the field, I wouldn’t buy it.

Scritto da: Bob T, GA

Very heavy- not very portable

I purchased this top with the Bora Centipede Support 6S. The top is made of a high density fiber board and is very heavy and difficult to handle. It is 2’ x 4’ and hinged in the middle. It is definitely not very portable which makes it not well suited as a top for the 6S leg set. Also, be careful when folding the top, it is easy to get a finger caught between the two hinged panels. I am disappointed that Bora couldn’t design a much lighter more portable top.

Scritto da: Les Ehnes

Heavy

The Bora centipede system is a great concept however, in order to get the right size to fit your table you may have to buy multiple of these folding table tops, the unfortunate part is that you cannot connect all sides to your centipede stand because there is not enough mounting points, thus not allowing additional tops to be completely fastened down. It makes high/Lows at every joint where each additional table top meet and does not provide a nice flat surface. Its a good start but needs refinement.

Scritto da: Linda Kelly

Love this product

Very much liked this addition to the Bora Centipede framework. Tried this first side to be sure it was sturdy, will be ordering another for the second half of my framework.

Scritto da: AJ Bull

Depends on centipede model.

If you bought anything more than the 2x4 centipede a half sheet of ply works just fine. Notes: - I bought the 4x6 centipede with one of these tops to see if shelling out another $150 was worth it - Assembly/Disassembly takes about five minutes - if you’re tight on space it’s worth it but if you can keep a half sheet of ply somewhere it does the same trick - carrying handle and a space saving hinge are the only things that make it worth it. -bought an 18mm ply sheet and ripped it down (on the centipede) to supplement the 2x4 section and I’m a happy camper

Scritto da: Francis Simmons

Good idea but not worth it

Cool concept but not worth it. A set of horses and piece of plywood does the trick. The wood table seems like it would fall apart if it ever got wet.

Scritto da: Amazon Customer

Poorly designed tabletops

Bought these for the centipede table that I gave as a Christmas gift but ordered the tabletops for a birthday gift. By the time they were opened as the birthday gift it was past the return window time. They did not fit properly on the centipede table. Now we have two tabletops and two storage bags that can’t be returned. The centipede table works fine. The tabletops are poorly designed.

Scritto da: DavidW

Attachment handles are challenging

Like it overall. I find attaching the top to the base a bit tricky as it’s hard to get my hands in to turn the handles.

Scritto da: Douglas W.

Emits a strong VOC smell

Returned this product because it emits a very large amount of VOC off-gassing. This is likely formaldehyde being released from the low quality MDF used for the panels. Even after a week out of the box, it was still strong enough to make it difficult to be in the same room with it. The product is probably fine for use outdoors, but would not recommend it if you plan to use it indoors. In addition, although the product is very sturdy, it's quite awkward to setup due to its heavy 27.5 lb weight.