Čikāgas Latrobe 69852 159. sērijas ātrgaitas tērauda īsa garuma urbju komplekts metāla korpusā, melnā oksīda apdare, 135 grādu šķelšanās punkts, collas, 21 gabals, 1/16–3/8 ar 1/64 soli

Name: Čikāgas Latrobe 69852 159. sērijas ātrgaitas tērauda īsa garuma urbju komplekts metāla korpusā, melnā oksīda apdare, 135 grādu šķelšanās punkts, collas, 21 gabals, 1/16–3/8 ar 1/64 soli
Brand: Chicago Latrobe
SKU: 0662355698525
Price: 127.42 EUR
Availability: InStock

Brand:Chicago Latrobe

3.7/5

€
127.42

Greenfield Industries ir vadošais izlietojamo griezējinstrumentu un saistīto izstrādājumu ražotājs. Uzņēmums pārdod tūkstošiem produktu ar zīmolu nosaukumiem Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett un Putnam Tools, Geometric, Vers-O-Tool, H & G un Acme-Fette. Produktu līnijās ietilpst urbji, gala frēzes, krāni, presformas, rīvgriezēji, iegremdēšanas ierīces, urbumi, instrumentu uzgaļi un daudz kas cits. Šie instrumenti tiek izmantoti dažādos pielietojumos. Ja tas tiek urbts, griezts, urbts, rakts, formēts, frēzēts, štancēts, veidots, vilkts vai vītņots, Greenfield Industries produkti ir smagi strādājuši. 2009. gadā Greenfield Industries kļuva par daļu no Top-Eastern Group, kas ir pasaulē lielākais spirālurbjmašīnu ražotājs. Šo divu spēkstaciju uzņēmumu apvienošana nodrošina abu globālo jaudu, kas nepieciešama, lai iesaistītos pasaules griezējinstrumentu tirgos. Apvienojot priekšrocības, ko sniedz pasaules klases ražošanas iekārtas, pieredzējušu pārdošanu un tehnisko atbalstu, kā arī labi zināmus un cienījamus zīmolus, Greenfield Industries piedāvā tirgū uzvarošu kombināciju. Tā kā mūsu klientu, izplatītāju, darbinieku, produktu un pakalpojumu saime turpina pieaugt, mēs saglabājam savu apņemšanos sasniegt izcilību.

Nav pieejama neviena vienība

EAN: 0662355698525

Kategorijas Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Elektrourbju daļas un piederumi, Frezas konusveida zobu frēzēm, urbji Uzgaļi, Hex- kāta urbji,

Īpaši biezs audums lielākai izturībai un stingrībai salīdzinājumā ar standarta urbjiem. Ražots ASV. Pašcentrējošais 135 grādu šķelšanās punkts iekļūst cietā materiālā bez pilota cauruma un rada nelielas skaidas, lai samazinātu aizsērēšanu. Melnā oksīda apdare samazina nodilumu, vienlaikus veicinot skaidu un dzesēšanas šķidruma plūsmu uz dzelzs materiāliem. Ātrgaitas tērauds (HSS) nodrošina nodilumizturības cietību. 21 īsa garuma urbja komplektā ietilpst collu izmēri no 1/16 līdz 3/8 ar soli 1/64.

Batteries Required?	‎No
Brand	Chicago Latrobe
Brand	‎Chicago Latrobe
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 44 ratings 4.7 out of 5 stars
Cutting Angle String	135 Degrees
Cutting Angle String	‎135 Degrees
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Black Oxide
Finish Type	Black Oxide
Finish Type	‎Black Oxide
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎1.1 x 6.8 x 4.1 inches
Item model number	‎69852
Item Package Quantity	‎1
Item Weight	‎1.35 pounds
Manufacturer	‎Greenfield Industries
Material	High Speed Steel
Material	‎High Speed Steel
Measurement System	‎Inch
Part Number	‎69852
Power Source	‎Battery Powered
Product Dimensions	‎1.1 x 6.8 x 4.1 inches
Shank Type	Straight
Shank Type	‎Straight
Surface Recommendation	‎Cast Iron,Steel
Thickness	‎11 Inches
Tool Flute Type	‎Straight
Tool Tip Description	‎Split Point

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Lost In Silent Hill

Great Product!

I purchased this “shorty” drill bit set to fit in a super tight space with an 90 degree angle drill and some cutting oil. This set was Exactly what I needed for the tight fit on my tractor. A+, Recommended!

Scritto da: Samuel Meredith

Best purchase since my lathe and mill

Even using a centering bit I have been frustrated with bent, wobbly, wandering drill bits and inaccurate holes using my lathe. I work with brass, mild steel, some aluminum and rarely need to drill deeper than 1” in smaller sizes., 1/16 through 3/8. These seem dandy right out of the box. I will report later if issues of loss of cutting edge arise.

Scritto da: Robert Robinson

Drill Bit set

Very nice set of drill bits in a durable metal closing cast. Just what my husband wanted.

Scritto da: T. S.

Great for Taig

What makes these bits stand out is their extremely short size. I was having trouble finding bits that had enough Z clearance on my Taig mill. I purchased these bits along with a metric set of ER-16 collets (to hold the bits directly instead of using the jacob's chuck) and it has been a night and day difference. I can actually use most of the sizes in the set now at the same time as a vise. The price is so mellow too, I'm not sure why I didn't make the switch sooner.

Scritto da: David J. Brunell

Quality, USA-made drills

I was looking for a set of drills for my Proxxon FF 230 micro mill/drill, and this set is perfect. With a small milling machine, there often isn't a lot of vertical clearance, and jobber-length drills in the larger sizes are simply too long. With screw-machine-length drills, I can usually establish a reference with my edge/center finder and then immediately insert the correct drill without changing the table-to-spindle distance. These drills are sharp and run true. I've bought a few Chinese drill sets lately, and while you may be able to pick up a 115-piece set for less than $50, good luck drilling metal with them and having the hole be round and close to the desired size.

Scritto da: tekHedd

Sharp, inexpensive

Great for the price. Of course, at the price they could be total crap and still be "great for the price", but they do seem to be decent quality. I'm working aluminum, so I can not rate the durability, but they are initially quite sharp and cut well, at least. I'll be back with an update if I have problems.

Scritto da: danielwayneupchurch

Quality drill bits!

Stubby drill bits work great in my magnetic base drill. A must have for these kind of drills! Wish I could find stubby drill bits larger than 1/2”.

Scritto da: CarbonF33

Great bits so far.

I have only had these bits a couple of months but I have used them enough to have an idea about their quality. They are sharp and cut mild steel and aluminum with no problem. I got them because of clearance problems with my Mini Mill, but I have also found that the short length makes it possible to skip drilling a pilot hole with a center drill; they are much less prone to "walk".

Scritto da: Amazon Customer

Nicely made , black finish

Good for small machine work , stiffer than long drills.

Scritto da: mike

good price

Perfect size