Corsair CX-9059001-WW Hydro X Series, Xt Softline, 10/13mm (3/8In/ 1/2In) ID/OD, caurules, caurspīdīgs

Name: Corsair CX-9059001-WW Hydro X Series, Xt Softline, 10/13mm (3/8In/ 1/2In) ID/OD, caurules, caurspīdīgs
Brand: Corsair
SKU: 0843591081801
Price: 47.05 EUR
Availability: InStock

Brand:Corsair

3.5/5

€
47.05

CORSAIR Hydro X Series XT Softline 10/13 mm caurule, kas apvienota ar CORSAIR Hydro X sērijas XF kompresijas veidgabaliem, nodrošina vienkāršus un elastīgus savienojumus starp jūsu Hydro X sērijas pielāgotajām dzesēšanas iekārtām. Novietojiet savu dzesēšanas šķidrumu ar pilnībā caurspīdīgām caurulēm, kas izgatavotas no īpaši izturīga, UV izturīga PVC materiāla. Tehniskās specifikācijas Produkta veids: Caurule Maksimālā darba temperatūra: 60°C dzesēšanas šķidruma temperatūra Materiāls: PVC Saderīgi dzesēšanas šķidrumi: CORSAIR XL vai līdzvērtīgs Krāsa: Caurspīdīgs Kastes saturs • 10/13 mm caurule (L 3 m)

Summa

Pievienot grozam Pērc tagad

EAN: 0843591081801

Kategorijas

Viegli sagriezt līdz vajadzīgajam garumam ar cauruļu griezējiem vai šķērēm. UV izturīgas caurules, kas izgatavotas tā, lai izturētu laika pārbaudi bez krāsas maiņas vai deformācijas. Izgatavots no PVC materiāla, kas ir pietiekami elastīgs, lai nodrošinātu ciešus līkumus korpusa iekšpusē, un pietiekami izturīgs, lai dzesēšanas šķidrums darbotos gadiem ilgi. Pilnībā caurspīdīga caurule parāda jūsu dzesēšanas šķidrumu.

Batteries	1 A batteries required.
Brand	Corsair
Color	Clear
Country of Origin	Taiwan
Customer Reviews	4.5 4.5 out of 5 stars 1,384 ratings 4.5 out of 5 stars
Item Dimensions LxWxH	118.11 x 0.51 x 0.51 inches
Item model number	CX-9059001-WW
Item Weight	0.71 Pounds
Item Weight	11.4 ounces
Manufacturer	Corsair
Material	PVC
Nominal Wall Thickness	1.3 month
Product Dimensions	118.11 x 0.51 x 0.51 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Jordan Williams

It's good stuff

It seems like good quality hosing. Had a great snug fit to my connections and was easy enough to work with. I gave it 4 starts for 1 reason while it was the right size hose....the overall diameter was a bit thin just felt a bit cheap and for the price and the fact that with the Corsair name attached to it, I guess I expected it to be a thicker sturdy feeling hose. Tldr....works great, it's super clear, outside diameter a little small but enough to seal fittings

Scritto da: Fabian O.

Corsair es sinónimo de calidad

Una vez mas corsair se caracteriza por artículos de excelente calidad, tiene muy buena resistencia a altas temperaturas, no se decoloran con el tiempo, manejable no rígida, flexible y suave para cortar a tu gusto y necesidad, tamaño correcto con la descripción

Scritto da: V

Excellent tubing

Exactly what I needed for my gpu loop

Scritto da: Dean Jones

Did the job

Hose was a good quality and worked great with The corsair fittings

Scritto da: Blake

A world of difference!

I thought the price for this amount of Vinyl tubing was Insane, I still do, Kind of.. So I bought a Bulk 50ft roll of some random brand on amazon for half the price.. after using it for a year I was met with tubing that turned to almost stone, discolored instantly and polluted the water loop with what I can only imagine is manufacturing residues After that huge mess, I decided to try the much more expensive Corsair CX-9059001, and the difference in Quality and softness is unworldly.. what a superior product! Do not make the same mistakes I did, invest in Your loop, buy quality products like this one. - Blake

Scritto da: Jason C

Way too soft for me, going to go with EK 10/13 mm soft tubing.

Tubing is very soft. I usually go with EK, but thought I would try Corsair, it is built for their ecosystem and all. But going to go with what I have been using all along.

Scritto da: Karch

So far not bad | Update: Quality drop.

I wanted a thin soft tubing for two reasons. 1. I am too lazy to do hardline again. 2. I wanted to have some fun doing loops and arch with watercooling. The only drawback is that I made the mistake of going with corsair black coolant (clear) and not adding in a flow indicator. It is too crystal clear and I had a panic attack when I set the pump to max and could still not tell if it was running. Regarding the smell, it isn't bad, but somewhat off. It reminds me of those bubble mixes from childhood. Make of that what you will. Edit 10/1/2020: So, slight update. Its been roughly six months since install with this tubing. My system still idles around low 30s, however I do some heavier games which push it to high /mid 50s. I do have this set on a single gpu/cpu loop. There has been some yellowing in tubing due to high temps, mainly between gpu, cpu, and before rad. Though after rad, still almost perfectly clear. Honestly, for price, changing tubing every 6/8 months with fluid sounds reasonable, though that is to me. However, I will try out a few other brands of tubing and see how it compares and come back. Honestly, I considered dropping to 4 stars, but for me it falls mid 4.5. I may just use a mix of tubing types. Out of the seven lines, it is only the heat intensive areas (3) which have shown yellowing which make me re-considering. 9/21 So, its been about two years since I've first used this tubing. It has been my go-to due to how clean it looks. Yes, it does yellow after high heat over time; which makes this not be a product for everyone. However, I'll probably switch to a different tubing or go hardline later. Pictured you can see two tubing. The last bit of an older pack and the latest. The latest being the cloudy one. I'd like to assume it was a slight change to reduce how it reacts to heat over time, but for me, it is heavily noticable. The older tubing was crystaline clear. Will have to wait and see on how this does but the corsair frosted hardline tubes are looking a bit more attractive.

Scritto da: The hortens

DO NOT USE WITH EK FITTINGS

Typically Corsair stuff is great for me, but this thing SQUARTED all over my pc while it was running. It was my first time building a loop and I got EK fittings for the tubes 10/13mm. The tubes were really soft and easy to squeeze. I thought it was weird how easy it was to push the hose onto the barb. Also, tightening the locking ring was easy and it just bottomed out. Anyways, once it heated up to about 40C the tubes would soften and slide right off the barb. The most annoying part is it didn't happen during leak testing because it stayed cold. So it exploded inside my case and gave my seasonic prime tx 850W psu a shower, also some of my ssds. Luckily I was there to turn it off immediately and I have a datavac so I just blasted the water out and let everything dry and it all works fine now. I bought some primochill tubes and they work prefect and grip really hard on the barbs and take some real effort to tighten down. I don't know if this is a Corsair issue or EK, neither of them guarantees compatibility and I see a lot of people had this work fine for them. So maybe only certain fittings are a problem. If you get this and it seems too easy to install, just don't bother using it. The primochill kit is twice as much, but also includes 2 concentrate bottles; 1 for loop flushing and 1 for a gallon of DI water (biocide and corrosion protection) Be warned, and consider how much you are saving vs the risk.

Scritto da: A. purves

Corsiar Hydro X series xt review

okay first off i want to address a couple of things, there are reviews of this product saying it melts... I've had this running my 3600 at 65c fine with no issues what so ever, and another saying there was an issue with the fitting around fittings, again I've not experienced this it does how ever the soft tubing does kink very easy. in saying that if you take your time cut the tubing flat and not at a angle you shouldn't have a problem and there is plenty of tubing as well, also making sure that all the tubing is the right size for the fittings, as well as making sure that the connections are all tightly secured. if you ever have doubts about doing a water cooled setup, there are a myriad of tech youtubers that cover this topic that you can watch for help.

Scritto da: Dr Iain Chessell

Pretty good, kinks easily though

Works very well with the corsair hydro fittings, no leaks and no real complaints other than it kinks *really* easily. If you need a 90 degree bend, you better plan to do it over a run of 10 inches or more of tubing (or buy the Corsair 90 degree fittings for £6 a piece). So far so clear though - I'm running a deep red coolant and there's no sign of any staining or degradation

Scritto da: Ernesto

Fkfjfj

Its too squishy, ive already tried with a lot of different fittings and the damn tube gets out of them soaking my entire setup. It never happened to me before with other brands and im going to get really mad if tomorrow my pc doesnt turn on because this mfin tube. Im sure the fittings had the correct measurements and were correctly set up. Also it gets bent really easily making all the process a pain in the ass.

Scritto da: theonlykvgh

hmmmm

so i had this tube before and it was fine just got stained and i wanted to change loop liquid from blue to clear so i ordered more tubing after about a week give or take a few days the tubes started to collapse. i dont know why but it was always fine before and the tube are same length and eveything. so i will order another tube with a thicker wall and see how that goes

Scritto da: Mr M.

Poor quality at price tag, lots of green bacteria buildup in pipe work

For the price, very poor quality, a build up or bacteria stated on a sterile environment, originated in pipe work and spread onwards. Manufacturing process must not be clean and sterile