CURT 13390 3. klases piekabes sakabe, 2 collu uztvērējs, atklāts galvenais korpuss, der atlasītajam Subaru Legacy, Outback

Name: CURT 13390 3. klases piekabes sakabe, 2 collu uztvērējs, atklāts galvenais korpuss, der atlasītajam Subaru Legacy, Outback
Brand: CURT
SKU: 0612314133901
Price: 636.26 EUR
Availability: InStock

Brand:CURT

3.7/5

€
636.26

Neatkarīgi no jūsu uzdevuma — laivas nolaišana ūdenī pirms rītausmas, kempera uzstādīšana pirms steigas vai pēdējās kravas nogādāšana izgāztuvē pirms slēgšanas — CURT 3. klases piekabes sakabes nodrošina nopietnu vilkšanai nepieciešamo spēku. Tie atvieglo piekabināšanu un Bring It, piedāvājot transportlīdzeklim raksturīgu piemērotību un svara ietilpību, lai apstrādātu dažādas piekabes. Pielāgotas 3. klases sakabes ir visizplatītākais pikapu un apvidus auto uztvērēja sakabes veids. To svara diapazona dēļ tie ir sastopami arī pilna izmēra automašīnās, krosoveros un minivenos. Katrs 3. klases uzkabes komplekts ir paredzēts uzstādīšanai, kas paredzēts transportlīdzeklim. Šis konkrētais komplekts ir piemērots noteiktiem Subaru Legacy un Outback gadiem (skatiet informāciju par lietojumprogrammu, lai pārbaudītu transportlīdzekļa saderību). Tas nodrošina 4000 mārciņu nestspēju. GTW un 600 mārciņas. TW. CURT 3. klases piekabes sakabes parasti izmanto, lai piestiprinātu un vilktu komunālo pakalpojumu piekabes, laivu piekabes, kemperus, sniega motociklus vai visurgājējus un citus (PIEZĪME: nekad nepārsniedziet zemākās nominālās piekabes daļas). Katrai 3. klases sakabei ir 2 uztvērēja caurule, un tā ir pārbaudīta saskaņā ar SAE J684 drošības nolūkos. Lai nodrošinātu, ka CURT 3. klases uztvērēja sakabes ir visas, kas nepieciešamas nopietnai piekabei, tās ir izstrādātas, izmantojot praktisku pieeju, un ir izgatavotas no izturīga, augstas stiprības tērauda un precīzas metināšanas. Mēs arī aizsargājam savas 3. klases uzkabes ar šķidru A pārklājumu un melnu pulvera pārklājumu, kas nodrošina izcilu izturību pret rūsu, šķembām un UV bojājumiem.

Summa

Pievienot grozam Pērc tagad

EAN: 0612314133901

Kategorijas Automobiļu nozare, Interjera piederumi, Tilpnes un vinčas, Kravas bagāžnieku āķi, Uzņemšanas ierīces,

Ierobežota mūža garantija sākotnējam pircējam. Hitch Ball & Ball Mount tiek pārdots atsevišķi. Nekad nepārsniedziet transportlīdzekļa svaru. Piekabes bruto svars (GTW) un mēles svars (TW) atšķiras atkarībā no pielietojuma. 2 collu uztvērēja caurules atvere. VIEGLI UZSTĀDĪT. Šī uzkare piedāvā pielāgotu, rūpnīcā pielāgotu Subaru Legacy un Outback modeļu gadiem. RŪSĀ, SKALMU, UV IZTURĪGS. Šis sakabes āķis ir aizsargāts ar unikālu rūsas izturīga šķidruma Bonderite dubultā pārklājuma apdari un īpaši izturīgu melnu pulvera pārklājumu. Abas apdares ir kopīgi sacietētas, lai nodrošinātu izcilu izturību pret rūsu, šķembām un UV stariem. PILNĪBĀ PĀRBAUDĒTS. Katrs CURT 3. klases piekabes sakabes dizains tiek pārbaudīts reālos apstākļos uz transportlīdzekļa mūsu Detroitas inženiertehniskajā iestādē. Pēcpārdošanas sakabes tiek pārbaudītas saskaņā ar SAE J684 standartiem, lai nodrošinātu maksimālu drošību vilkšanas laikā. DAUDZVEIDĪGS DIZAINS. Šī 3. klases sakabe aprīko jūsu transportlīdzekli ar standarta 2 collu x 2 collu sakabes uztvērēju, kas ļauj izmantot dažādas vilkšanas iespējas. Tas var pieņemt lodīšu stiprinājumu, kravas turētāju, velosipēdu bagāžnieku, sakabes āķi un daudz ko citu. UZTICAMS SPĒKS. Šī piekabes sakabe ir paredzēta 4000 mārciņām. piekabes pilna masa un 600 mārciņas. mēles svars (ierobežots ar zemāko nominālo vilkšanas komponentu). Materiāls - oglekļa tērauds. Nepieciešama urbšana.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 372 ratings 4.6 out of 5 stars
Exterior	‎GLOSS BLACK POWDER COAT
Finish Type	GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer	‎No
Item model number	‎13390
Item Weight	35 Pounds
Item Weight	‎35 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎13390
Material	Carbon Steel
Model	‎Class 3 Hitch
OEM Part Number	‎13390
Product Dimensions	‎18 x 42 x 12 inches
Vehicle Service Type	Pickup Trucks, Marine-Personal-Craft, ATV, Car, Sport-Utility-Vehicles, Snowmobile, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Cindy

Nice hitch, great quality, but so-so instructions.

Pros: 1. Made in USA. 2. Excellent Workmanship/finish 3. Heavy Duty 4. Looks nice after installation. 5. Nice hardware kit Cons: 1. Weak Instructions. Ok...Kudos to those who posted tips on installation. If you have a few tools, you can install this without too much trouble. Extra Tools Used: 1. Dremell tool with cutting disk 2. Floor Jack 3. sharpie marker 4. small telescoping magnetic pickup tool (pen-size) 5. Rust inhibitor paint or coating (for where you drill the car) Recommended steps: 1. Open the hatch and remove everything lining the floor in the trunk area. The foam surrounds on either side of the spare tire will come out. They are held in by some plastic clips. Grip the foam on either side of the clips as close to them as possible and give a quick, firm tug straight up. It feels at first like they will break, but they will not. they will fly off though, so be careful and watch where they go! 2. Under the car, if you can do so, unbolt the muffler on at the first connector just upstream from the muffler. If your car is new, this will be fairly easy. This will make getting the rubber supports from on the muffler easy to remove. Otherwise, be prepared to wrestle with them, as they do not come off easily otherwise. If the bolts are not cooperative, use some PB Blaster on the bolts to help break them loose, or get new ones to replace the old and cut them off. I was able to get my floor jack under the muffler to help support it. 3. Remove the heat shield. Set this aside. Do not cut it per the instructions just yet. 4. The instructions say to enlarge holes on the underside of the car. Do NOT do this. In northern climates, this will expose the car to additional road salt. Instead, inside the trunk towards the seat, on each frame rail you will see a hole covered with a circle of black tape. Remove the tape. Place the bolt on each hole and trace it with the sharpie. Using the dremel tool, enlarge the hole with the cutting wheel. If you take your time, you can make a nice cut. The only real discerning thing is that you realize how thin the sheet metal is! 5. This is where the floor jack came in handy. I positioned the jack under the center of the car and lifted the hitch into place. as you get close to the car, align the bolt holes closest to the bumper and push the hitch up firmly against the car with the floor jack. 6. Back to the instructions. Follow the instructions for inserting the bolts. The wires that guide the bolts and washers work slick, but require some patience. I ended up using a small telescoping magnet to "catch" the end of the wire and pull it through the hole. Guide the bolt and washer through the holes closest to the bumper. run the nut up and tighten firmly. 7. With the hitch now in place, use it as a guide to drill the hole locations on the hitch where none exist on the car. Repeat the method for inserting the bolts in the holes you just drilled. Tighten up the nuts, and you have now mounted the hitch. Drop the floor jack and remove it. 8. Heat shield modification. Take the heat shield and hold it up close where it mounts. You just covered one of the mounting holes, so it will need cut to fit now. The instructions have you cutting off more of the shield than needed. You can do a nicer job if you do it this way. If you are like me, and the jagged edge bothers you, leave a little extra material on the shield and using pliers you can add hem bend along the edge you cut. Reinstall. 9. Using the floor jack again, lift the muffler back up in to place. Get the rubber supports back on the shafts they mount to. Bolt the muffler back to the pipes. You are now done on the underside of the car. 10. dress the hole if you cut with the dremel too with the rust inhibitor. I covered these holes with electrical tape. put all the stuff you removed from the truck back in, reverse order, of course. Button everything up and you are ready to go. I gave this 5 starts due to the quality of the hitch. Without online help to clarify and simplify the installation, I would have given this a 3 or 4 stars, as I would have wrestled with it. Instead, it went pretty smooth. My approximate installation time was 2.5 hours, as I took my time and pre-fit some things. If you are not handy or have the tools recommended, get some help from someone who does. It will save you from some frustrations.

Scritto da: Caroline

challenging installation, but solidly built.

The instructions are garbage so throw those out immediately. Get yourself a 10mm socket, 3/4" socket with an extension, a breaker bar and most importantly: 1" step drill bit! You need to drill through the frame in order to "fish" the bolts through. Now that sounds frustrating and it is, but it actually worked really well and I got them fished through without issue. When you're finished that 1" hole will be exposed to the road elements, the other covered by the exhaust shield. You need to cover that hole or debris/water will get in the frame and rust it out from the inside. I actually used a mason jar lid and metal drywall anchor to patch the hole. Other than the tedious install, it was well worth it. Solid construction and looks discrete.

Scritto da: Amazon Customer

Sturdy, self installation was fine.

First off, I have not towed with this unit yet. So I can't speak to that yet. Although I don't expect any trouble in that area. This review will cover my initial impressions and installation. The unit is sturdy and the welds and construction look solid. The paint is well applied and I expect it to hold up for a long time against the elements. Installation. I put this on a 2010 Subaru Outback. I can vouch that it fits for that. When I first put it into position to take a look, I noticed it is pretty snug against the wheel well of the spare tire. I was concerned at first but not at the end. It fits, it's just close. The installation went pretty much exactly like the video. Lower the exahaust a little, remove and modify the heat shield, drill the frame and bolt the thing on. The clever tool to fish the hardware through the frame works well and I had no trouble with it. I worked slowly and deliberately to avoid trouble with that part of the installation. I'd say it took maybe 90 minutes all told. About what I expected. The only challenge is the muffler being in the way. It's jsut in the way a little on the one side. But, it did not stop me from doing what I needed to do. More of an irritant than an obstacle. If the muffler bolts/nuts weren't rusted and frozen together, I would have removed it to make things easier. Also, I did order the tool to pop the rubber hanger supports out for the exhaust. That thing made it SO easy that I have to recommend that - otherwise you can wrestle with the things until you get the hangers out. On installation, I put anti-seize on eveything including the bolts for the heat shield too. Just a tip for anyone doing this in the northeast. I am happy with the fit, look, and installation of this unit and I expect it to serve my needs well: Bike rack and light towing.

Scritto da: David Shuttleworth

NO PROBLEM INSTALATION

It took very little time for the two of us to install. It is very solid and well constructed

Scritto da: Gary

Great Purchase

Towed a uhaul across the country with out a worry. It was easy to install and was great value. Happily recommend.

Scritto da: Amazon Customer

Great quality

Easy install instructions and hauks well

Scritto da: Steeve

Perfect fit

Strongly recommend this. Instructions are very clear and accurate. Tough built. If you're looking for a hitch, this one is a no brainer, period.