CURT 45090 3. klases piekabes āķa lodveida stiprinājums, der 2 collu uztvērējam, 5000 mārciņas, 1 collas caurums, 8 collu nolaižams, spīdīgs, melns pulvera pārklājums

Brand:CURT

3.8/5

111.34

CURT 3. klases jeb standarta noslodzes lodīšu stiprinājumi ir vairāk nekā 1. un 2. klase. Tiem ir 2 x 2 kāts, un tiem ir lielāka svara ietilpība lieljaudas piekabju vilkšanai, tostarp komunālo pakalpojumu piekabēm, laivu piekabēm, kemperiem, viena zirga lopu piekabes un lielākā daļa atpūtas transportlīdzekļu piekabju. Tā kā 3. klases piekabes sakabes ir visizplatītākais pikapu un apvidus auto piekabes sakabes veids, 3. klases lodveida stiprinājums pēc asociācijas ir lielisks papildinājums šai piekabes sakabei un šiem lielākajiem transportlīdzekļiem (PIEZĪME: nekad nepārsniedziet zemāko svaru jebkura vilkšanas sastāvdaļa; t.i., transportlīdzeklis, sakabe, piekabe utt. Šo konkrēto 3. klases lodīšu stiprinājumu var izmantot nolaižamā pozīcijā, lai nodrošinātu kritumu par 8, piekabes bruto masas ietilpību 5000 mārciņas. un mēles svars ir 500 mārciņas. To var arī apgriezt, lai nodrošinātu 6 kāpumu un piekabes bruto svaru 3500 mārciņas. un mēles svars ir 350 mārciņas. Tā garums ir 11-1/2. 3. klases lodīšu stiprinājumi ir CNC veidoti un robotizēti metināti, lai nodrošinātu nelokāmu precizitāti un uzticamu izturību katrā vienībā. Mēs mehāniski atkaļķojam katru, lai nodrošinātu gludu virsmu ilgstošai apdarei. Šim 3. klases lodveida stiprinājumam ir izturīgs, spīdīgs melns pulvera pārklājums, kas aizsargā pret koroziju, skrāpējumiem, UV bojājumiem un daudz ko citu, lai sniegtu tai biezu ādu, kas tai nepieciešama, lai stātos priekšā ceļam.

Paaugstinājums: 6 collas. VIEGLI UZSTĀDĪT. Lai uzstādītu šo 3. klases sakabes lodīšu stiprinājumu savā transportlīdzeklī, vienkārši ievietojiet kātu sava transportlīdzekļa 2 collu sakabes uztvērējā. Noapaļotais kāts atvieglo uzstādīšanu. Pēc tam nostipriniet kātu vietā ar sakabes tapu (jāiegādājas atsevišķi). KOROZIJAS IZTURĪGS. Ilgstošai lietošanai šī lodveida uzkare ir aizsargāta ar izturīgu melnu pulvera pārklājumu, kas viegli pretojas lietus, netīrumu, sniega, ceļa sāls un citu korozīvu apdraudējumu bojājumiem. GATAVS vilkt. Piekabes piekabināšana ir vienkārša, izmantojot šo 2 collu lodveida stiprinājumu. Tam ir 1 collas caurums, lai piestiprinātu piekabes sakabes lodi ar 1 collas diametra kātu (piekabes lode tiek pārdota atsevišķi). DAUDZVEIDĪGA LIETOŠANA. Šim piekabes sakabes lodveida stiprinājumam ir 2 collu x 2 collu kāts, lai tas būtu piemērots praktiski jebkuram nozares standarta 2 collu uztvērējam. Lodīšu stiprinājumam ir arī 8 collu kritums un 6 collu pacēlums, lai veicinātu līdzenu vilkšanu. UZTICAMS SPĒKS. Šī lodveida uzkare ir izgatavota no augstas stiprības tērauda, ​​un tā ir paredzēta, lai vilktu līdz 5000 mārciņām bruto piekabes svaru un 500 mārciņas mēles svaru kritiena stāvoklī (pacelšanās pozīcija: 3500 mārciņas GTW, 350 mārciņas TW).
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.8 4.8 out of 5 stars 792 ratings 4.8 out of 5 stars
Exterior ‎Painted
Finish Type Gloss Black Powder Coat
Is Discontinued By Manufacturer ‎No
Item model number ‎45090
Item Weight 10 Pounds
Item Weight ‎10 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎45090
Material Carbon Steel
Model ‎Class 3 Ball Mount
OEM Part Number ‎45090
Product Dimensions ‎16 x 9 x 3 inches
Vehicle Service Type Pickup Trucks, Marine-Personal-Craft, Sport-Utility-Vehicles, Trailer

3.8

13 Review
5 Star
85
4 Star
11
3 Star
2
2 Star
0
1 Star
1

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Tony T
Quality Hitch
Hitch seems very sturdy,works well on my Yukon
Scritto da: mike
Works great
Works great and the drop was perfect for my trailer
Scritto da: kindleuser
Using for Antenna Mount
Had to shim the hole for antenna bolt but works great. Sturdy with optional anti rattle clamp.
Scritto da: T-Bone
Solid
Solid hitch. Drop was just what I needed for hooking up my 1962 Airstream to a Subaru Accent. The height of the Subaru made the trailer pitch up. The 8" drop was just right. It is a bit longer than my old straight hitch so I needed to extend the safety chain. Definitely recommend it.
Scritto da: waltbobjr
Worked on My 2005 Sienna
Used on my 2005 Sienna with a Curt receiver. Top inside of my receiver was 10" above ground and I wanted the 6" rise to get up toward 17" total. There are no standards, but my goal was to use Home Depot trailers (and maybe U-Haul 4x8 Box trailer) and when I stopped at store I measured the trailers at about 17-18". Used with Curt 40004 ball and with the Curt 45007 sleeve as there are no indents or tabs on this mount to keep ball from rotating as it is tightened. The Curt 45007 tongue sleeve worked perfect (albeit pricy) and was able to install and remove balls with one wrench. There has been some reviews that expected Curt products to be made in USA. I can confirm that all the Curt products I bought: the 45090 mount, 40002/40004 ball, the 23590 anti-rattle kit, the 45007 sleeve, and the 20001 wrench are made overseas (mostly China). Black powder coat is nice, but is is chipped/scratched/damaged in many places as these mounts are not individually boxed. I fully expect it to start rusting immediately once exposed to elements. On the other hand, I don't leave it attached, but keep it in a hitch tote bag in the trunk. With 2" ball mounted I was just able to squeeze into the Classic Accessories 74877 Hitch Tote, but most definitely pushing the tote over the recommended limit. All that said, I was prepping for a future tow and I haven't confirmed that my choice of 6" rise is correct for the 2005 Sienna application.
Scritto da: HMD
Heavy steel
It is a heavy hitch that does a great job at hitching things.
Scritto da: Michael Haynes
Looks great, Works great
Powdercoated finish looks great. A little damaged in shipping but that’s to be expected with something this heavy. Has held up great so far
Scritto da: wook1
Perfect for my Highlander
CURT quality. Rock solid. Heavy (I usually hang my car and boat accessories but this just has to sit on my workbench when not in use. Not a problem). And, most importantly, it is the perfect fit (inverted as a rise) for my 2013 Highlander to connect my boat trailer. Add to that an equally solid hitch pin/cotter pin combo (Curt 21510 available here on Amazon) with rubberized coatings on the ends of each for grip and I'm a happy traveler. Highly recommend. Note: I had to try a couple to find the right rise because simple measurement isn't exact, since the car also sinks when you add the weight to it (and Highlanders have REALLY soft suspensions. Its SUV height/center of gravity on a Camry platform. I'm talking windshield wipers move the car when sitting still soft.) It may seem obvious but if you're a newbie to trailering like I was, be sure to test with your max load on the trailer to see how both car and trailer sit. Hope this helps.
Scritto da: gris
Yep... it' a hitch
Seemed like a decent enough hitch at a decent price. For some reason though there was quite a few notches in one side (lf) of the long steel bar that the ball bolts too. Looked like someone hit it a half dozen time with an ax, cold chisel, or other sharp object. Had to use a file to take the sharp edges off to prevent cutting hands or fingers when handling. So much for the anti-corrosive coating. LOL The hole for the ball was a bit off centre too. Other than those concerns, and the need to get new longer safety chains for my trailer, with the new 8 drop, tows fine and the trailer rides level.
Scritto da: randall fenn
Nice hitch
This product is very well-made and very strong
Scritto da: Random Dad
Fits my Dodge Caravan with slight modification.
The tube on this could be an inch longer. It rubs against my bumper. So I took an angle grinder and removed a small countoured bite out of the triangular reinforcing plate. Now it fits my 2015 Caravan nicely and does not contact the bodywork.
Scritto da: Yvon rocheleau
First class
First class
Scritto da: Guillaume Demers
Five Stars
Great car rear protection :) Haven't actually bought it to trail anything.

Saistītie produkti

hot
GM piederumi
4.1/5

€ 201.81

GM piederumi
4.1/5

€ 201.81

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array