DARBNĪCA Slapjā/sausā putekļsūcēja piederumi WS25021A 13 pēdu mitrā/sausā vakuuma šļūtene, īpaši gara 2–1/2 collas x 13 pēdas, bloķējoša mitrā/sausā putekļsūcēja šļūtene mitrā/sausā veikala putekļsūcējiem

Brand:WORKSHOP Wet/Dry Vacs

3.7/5

101.25

PRODUKTA APRAKSTS Neatkarīgi no tā, vai mēģināt neļaut bērnam atvērt pagraba durvis, pievienot pievilcīgu un funkcionālu uzlabojumu jūsu skapja durvīm vai nostiprināt skapjus RV, Defender Security U 10306 Surface Bolt ir daudzpusīgs bloķēšanas risinājums. Viegli uzstādāma un izgatavota no izturīga cieta misiņa, 4 collu garās virsmas skrūvi var uzstādīt horizontāli vai vertikāli, un tajā ir iekļauts virsmas stiprinājuma turētājs un iedobes veida turētājs, lai pielāgotos dažādiem lietojumiem. Ar satīna niķeļa apdari virsmas skrūve ir ne tikai efektīva, bet arī pievilcīga. Tā ir lieliska alternatīva tradicionālajiem bērnu (un mājdzīvnieku) necaurlaidīgajiem izstrādājumiem, kurus var būt grūti uzstādīt un kuri nevar papildināt jūsu mājas interjeru. Virsmas skrūvi var uzstādīt ziņkārīgām mazām rociņām nepieejamā vietā, lai zīdaiņi, mazuļi un mazi bērni nevarētu bez uzraudzības iekļūt vai izkļūt bīstamās zonās, kā arī iziet cauri skapjiem un skapjiem. NO RAŽOTĀJA Šī bīdāmā skrūve ir izgatavota no cieta misiņa un ir pārklāta ar satīna niķeli. Tajā ir iekļauti 2 dažādi turētāji virszemes vai ieliktņu instalācijām. Izmanto uz ieejas durvīm vai skapjiem.

Nav pieejama neviena vienība
Slapjā, sausā vakuuma šļūtene ir piemērota lielākajai daļai veikalu putekļu sūcēju ar standarta 2-1/2 collu ieplūdes atveri. 2-1/2 collu diametra vakuuma piederumi nodrošina lielāka izmēra gružu savākšanu un maksimālu gaisa plūsmu. Atšķirībā no dažām veikala putekļsūcēja šļūtenēm, izmantojot bloķēšanas cilni, var viegli atvienot slapjā, sausā putekļsūcēja šļūteni uzglabāšanai. Izmantojot komplektā iekļautos adapterus, šī mitrā un sausā vakuuma šļūtene ir piemērota lielākajai daļai veikalu putekļsūcēju ar standarta 2-1/2 collu ieplūdes atveri, tostarp WORKSHOP mitro/sauso putekļu sūcēju. 2–1/2 collu x 13 pēdu bloķēšanas šļūtene nodrošina paplašinātu sasniedzamību, un bloķēšanas cilne lietošanas laikā nodrošina šļūteni savienotu ar mitro un sauso putekļu sūcēju. Slapjā, sausā vakuuma šļūtene ir piemērota lielākajai daļai veikalu putekļu sūcēju ar standarta 2-1/2 collu ieplūdes atveri. 2-1/2 collu diametra vakuuma piederumi nodrošina lielāka izmēra gružu savākšanu un maksimālu gaisa plūsmu. Atšķirībā no dažām veikala putekļsūcēja šļūtenēm, izmantojot bloķēšanas cilni, var viegli atvienot slapjā, sausā putekļsūcēja šļūteni uzglabāšanai. Izmantojot komplektā iekļautos adapterus, šī mitrā un sausā vakuuma šļūtene ir piemērota lielākajai daļai veikalu putekļsūcēju ar standarta 2-1/2 collu ieplūdes atveri, tostarp WORKSHOP mitro/sauso putekļu sūcēju. 2–1/2 collu x 13 pēdu bloķēšanas šļūtene nodrošina paplašinātu sasniedzamību, un bloķēšanas cilne lietošanas laikā nodrošina šļūteni savienotu ar mitro un sauso putekļu sūcēju.
Batteries Included? ‎No
Batteries Required? ‎No
Brand WORKSHOP Wet/Dry Vacs
Color Black
Color ‎Black
Country of Origin ‎Mexico
Customer Reviews 4.6 4.6 out of 5 stars 2,504 ratings 4.6 out of 5 stars
Included Components ‎2-1/2 in. x 13 ft. Locking Hose, 2 Locking Adapters, 1 Friction Fit Adapter
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 13 x 2.5 inches
Item model number ‎WS25021A
Item Package Quantity ‎1
Item Weight 2.64 Pounds
Item Weight ‎2.64 pounds
Manufacturer ‎Emerson Tool Company
Material Polyethylene
Material Polyethylene (PE)
Material ‎Polyethylene
Part Number ‎WS25021A
Power Source ‎hand_powered
Size ‎13'
Style ‎Hose
Warranty Description ‎No Warranty

3.7

13 Review
5 Star
75
4 Star
16
3 Star
6
2 Star
1
1 Star
3

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: david groschen
Fit perfect on my rigid shop vac
Using now works great
Scritto da: AMM
Great fit for Rigid WD12701
Just got it today and swapped it out with my existing hose in less than 30 seconds. I love that the longer length of the hose will allow me to stand on my ladder and vacuum overhead vents now without have to precariously carry a smaller shop vac up on the ladder with me. The connectors are good, solid, hard plastic. The hose itself feels like a lighter plastic than the original hose that came with it. But hey, maybe plastics have gotten lighter since the original shop vac purchase. IDK. Time will tell on durability. So far so good, though.
Scritto da: Kindle Customer
It seems sturdy enough
Definitely this is better than having a broken old hose... It seems sturdy while flexible enough to avoid cracking. It's too long for my needs, but I am satisfied overall with this purchase
Scritto da: walla2k5
Fits Craftsman
Good replacement hose, fit my older Craftsman vac perfectly. 13' hose length is the real highlight, highly recommend.
Scritto da: Jami V.
Great fit for my Rigid shop vac.
I am a contractor and always struggled with vacuuming a ceiling for dust. I would always have to get a worker help me and lift up the entire vacuum to cut a hole for a can light. Not any more. Also you can vac a much greater area without having to yank on the vaccuume and having it bang into a wall. Seems pretty durable and the clips at the ends keep it attached to the vac.
Scritto da: pissed off buyer
cheap
cheap
Scritto da: S. Josie
Fits
This is what I needed for my 10+ year old Rigid wet vac. Fits perfectly once I changed the connection end (which was easy to do).
Scritto da: Benedetto Franzoso
Close to OEM quality
For the quality and adapters provided it is an excellent product
Scritto da: José Manuel Blanco Quihuis
Que era exactamente lo que buscaba
Satisfizo mi necesidad. La coloqué entre mi sierra de mesa Dewalt y un aparato de los llamados ciclones (separador de partículas) colocado sobre mi aspiradora para seco y mojado. Dado que tiene 13 pies de largo, permite que ambas cosas queden con suficiente distancia para maniobrar piezas grandes de madera
Scritto da: Robert Thomas Bertram
hose would attach directly to my other hoses and fittings
The hose fittings were all too big for to fit directly onto my existing fitting and hoses. I had to order 2 sets of fittings that had to be put into place between the hose and my other hoses and fittings. It took quite awhile waiting for other fittings.
Scritto da: Al
Perfect workshop extension hose
I bought this 13' hose to be the main hose in my garage vacuum dust separation system and it does it's job perfectly. It's as solid as the original hose that came with the vac but it is much longer so I don't need to move my dust collection system around to clean up my garage. Great hose at a great price. Fits well with my Ridgid vacuum system and with all the extra adapters it comes with it should work well with any wet/dry vac system.
Scritto da: Eric M.
Too expensive for the quality
I am not totally happy with this product. It was delivered with a few flaws such as kinks and dingc. I compared it to the one that came with my vaccum system sided by side and you can see how cheaply made it is. This one was cheaply molded on both sides and joined together. I feel that after a few bends of the hose that it may start cracking or separating. I have not tried it on my machine yet so at the moment I will give it a 3 as I think for what it is it is way overpriced. I don't think I will purchase again.
Scritto da: Martin Daytona
Works Great!
Fit my Craftsmen Wet Vac like a Glove. Love the extra length compared to the 7' hose that came with it. This hose is actually way more flexible than the one that came with it as well. Thought it was a bit expensive, but that's life nowadays. Works Great!

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array