Digitālais manometrs, gaisa un gāzes spiediena mērītājs, diferenciālais divu portu spiediena mērītājs, liels LCD displejs ar fona apgaismojumu Klein Tools ET180

Brand:Klein Tools

3.6/5

171.66

Digitālais diferenciālais manometrs ET180 no Klein Tools mēra gaisa un gāzes spiedienu 1. un 2. portā un mēra starpību starp pieslēgvietām. Ērti pārslēdzieties starp mērvienībām: inH2O, bārs, oz/in2, psi, mbar, kPa, inHg, mmHg, kg/cm2, ftH20 un cmH2O. Liels, aizmugurgaismots LCD parāda minimālās, maksimālās un vidējās vērtības. Magnēts aizmugurē darbam brīvroku režīmā. Vairāk nekā 160 gadus uzņēmums Klein Tools ir ražojis augstākās kvalitātes, profesionālas kvalitātes rokas instrumentus, kas nodrošina veiktspēju, izturību un precizitāti, kas nepieciešama pareizai darba veikšanai. Mūsu inženieru, strādnieku un amatnieku ģimene turpina likt lietā sešu paaudžu pieredzi katrā mūsu radītajā rīkā, izmantojot tikai augstākās kvalitātes materiālus, izcilu meistarību un turot ražošanu pēc iespējas tuvāk mājām. Kleins nav tikai mūsu uzņēmuma nosaukums, tas ir arī mūsu ģimenes vārds. Un tā kā mēs esam amerikāņu uzņēmums, kas pieder ģimenei un kuru pārvalda ģimene, jūs zināt, ka varat paļauties uz to, ka būsim šeit rīt. Klein Tools ražo ne tikai lieliskus produktus, bet arī lieliskus produktus, kas atbilst profesionāļu prasībām, kuri tos izmanto katru dienu... Kopš 1857. gada.

LIELS FONA GAISMOJUMS LCD nodrošina vienkāršu skatīšanos vājā apgaismojumā un parāda vērtības, pārslēdzoties starp minimālo, maksimālo un vidējo. MĒRĪTĀS VIENVIENSpadsmit vienības: viegli pārslēgties starp inH2O, bāru, oz/in2, psi, mbar, kPa, inHg, mmHg, kg/cm2, ftH20 un cmH2O. STIPRĀ MAGNETS UZ MUGURĀ nodrošina manometru brīvroku lietošanai. MONITORS UN PROBLĒMU NOVĒRŠANA HVAC sistēmās ar diapazonu +/- 60 inH2O un pilnas skalas precizitāti +/-1,5 procenti. MĒRĪT STATISKO UN DIFERENCIĀLO spiedienu no divām pieslēgvietām gaisa un gāzes sistēmās.
Batteries 3 AAAA batteries required. (included)
Brand Klein Tools
Country of Origin China
Department Unisex-Adult
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 1 x 1 x 1 inches
Item model number ET180
Item Weight 5.92 Ounces
Manufacturer Klein Tools
Material Blend
Product Dimensions 1 x 1 x 1 inches; 5.92 Ounces

3.6

9 Review
5 Star
75
4 Star
15
3 Star
6
2 Star
2
1 Star
3

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Pat Thompson
Magically repaired my heater
Had a problem with my heater tripping from the pressure sensors not seeing enough draft. Got this to diagnose. Hooked it up with the 1900 feet of hose it comes with and measured pressure. Exactly where it’s supposed to be. Great. Waited around for the fault condition to occur: IT HAS NEVER OCCURRED AGAIN in 3 1/2 months! I, uh, just left it plumbed in and backed slowly away. Problem solved!
Scritto da: james
Case sucks.
I started with some other brand which did a decent job but with the Klein I can measure differential pressure which is much better. Could use at least one barb fitting for the price I paid for this. That 'other brand' came with one and only cost $39.
Scritto da: Diane Henry
Did the job for testing self installed heat pump.
Works well
Scritto da: Tim
Great manometer.
Excellent meter with a string magnet on the back and a clear screen on the display. I use this to check the pressure of my LP system on my RV. I really like the magnet, as it allows me to attach it to the side of the propane tank as I'm taking a reading.
Scritto da: donald foglesonger
ok
not very accurate
Scritto da: Scott
Tiny hose
The manometer seems to work great. The hose is too small around and soft for what I need on gas valves.
Scritto da: Gary Gendel
Make sure you have a snug fit with your tubing
This is a basic unit that is simple to use and easy to read. I needed it to calibrate an ERV. I originally had a very hard time getting a stable reading and even using some stuffing around the tubing to make a better seal didn't help. I bought some natural latex tubing that had a better seal which made things much better and repeated readings were stable. The magnet in the back was very handy to affix the meter in a good location so my hands were free to make the adjustments. I have a second and bigger ERV to install but I'm confident that calibration will go smoothly. If I had to complain about something, it would be the case. It's pretty cheaply made and doesn't really have a good layout for the meter and tubing. But it does it's job.
Scritto da: Syed
Not the one you’re looking for
I bought this to diagnose the Honeywell gas valve on my furnace. Felt that Klein was name brand to go for. Unfortunately, this manometer doesn’t come with any barbed adapters to connect to plugs on the gas valve. I needed a 1/8 in MIP to barb adapter, which was impossible to find at local hardware stores. It’s a cheap piece they could have thrown in to make a complete kit. Incredibly frustrating that it was not included.
Scritto da: Wrench
Awesome Tool
This little tester works like a charm!

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array