Dremel 678 apļveida griezējs un taisnas malas vadotne, rotācijas instrumenta stiprinājums, der Dremel modeļiem 4300, 4000, 3000 un 8220

Name: Dremel 678 apļveida griezējs un taisnas malas vadotne, rotācijas instrumenta stiprinājums, der Dremel modeļiem 4300, 4000, 3000 un 8220
Brand: Dremel
SKU: 0080596025083
Price: 42.74 EUR
Availability: InStock

Brand:Dremel

3.6/5

€
42.74

PRODUKTA APRAKSTS Izmantojiet mūsu novatorisko un plašo rotējošo piederumu un piederumu klāstu, lai maksimāli izmantotu savus Dremel rotācijas instrumentus. Lai kāds būtu jūsu projekts, mēs piedāvājam jums ideālu risinājumu. Dremel piederumi pieguļ jūsu rotējošajam instrumentam, lai piešķirtu tam īpašu funkciju. Neatkarīgi no tā, vai vēlaties grebt, gravēt, griezt vai slīpēt, ir pieejams Dremel uzgalis, lai paveiktu darbu. Novatoriskais Dremel apļveida griezējs un taisnās malas stiprinājums ļauj vienkārši paveikt vairāk ar savu rotējošo instrumentu. Tas ne tikai viegli piestiprinās pie Dremel rotējošā instrumenta un nogriež perfektus apļus no ¾ collas. līdz 12 collām. diametrā, bet tā taisnās malas vadotne ļauj frēzēt vai griezt taisnā līnijā. Dziļuma regulēšana ļauj viegli iestatīt pareizo griešanas dziļumu. Savietojams ar lielāko daļu Dremel vadu un bezvadu rotējošo instrumentu, un tam ir 1 gada ierobežota garantija. NO RAŽOTĀJA Šis novatoriskais stiprinājums ir vienkāršs veids, kā izgriezt apļveida caurumus daudzu veidu materiālos. Apļa griezējs 678-01 un taisnās malas vadotne ir viegli pievienojama Dremel ātrgaitas rotējošajam instrumentam un griež perfektus apļus no 3/4 collu līdz 12 collu diametrā. Circle Cutter ir ērtas mērīšanas vadotnes gan collās, gan centimetros, lai jūs katru reizi varētu izgriezt pareizā izmēra apli. Straight Edge Guide ļauj maršrutēt vai griezt taisnā līnijā.

Summa

Pievienot grozam Pērc tagad

EAN: 0080596025083

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Elektroinstrumentu rotējošās daļas un piederumi, Piederumi,

Straight Edge Guide ļauj maršrutēt vai griezt taisnā līnijā. Dziļuma regulēšana ļauj viegli iestatīt pareizo griešanas dziļumu. Ātri un viegli piestiprina bez instrumentiem. Savietojams ar Dremel instrumentu modeļiem: 100, 200, 3000, 4000, 8220, 8240, 8250 un 8260. Der arī uz Dremel 4300, ja to lieto kopā ar spīlēm un uzgriezni. Precīzi štancēta tērauda konstrukcija, kas nodrošina precizitāti un izturību. Veido apļus no 3/4 collas. -12 collas. (1,9-30 cm).

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Silver
Country of Origin	‎Taiwan
Customer Reviews	4.5 4.5 out of 5 stars 1,287 ratings 4.5 out of 5 stars
Included Components	‎Straight Edge Guide
Is Discontinued By Manufacturer	‎No
Item model number	‎678-02
Item Package Quantity	‎1
Item Weight	‎8.4 ounces
Manufacturer	‎Dremel
Part Number	‎678-02
Power Source	‎AC
Product Dimensions	‎3.45 x 5.1 x 8.4 inches
Warranty Description	‎2 Years

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: LL

Much needed for a straight line or circle.

It's worth the money

Scritto da: Jm2013

Works great for rough cut circles.

I purchased this to cut an expansion gap in my vinyl plank floor for a 4 inch floor outlet. I did practice on scrap pieces before doing it. I found that you have to have a constant motion without stopping when using the circle jig, or else you will protrude slightly outside the circle until you move consistently again. It worked great for my application since the electric box floor flange covered it by 1/4”. I wouldn’t recommend this jig for precise finish work. But for rough cut applications, I was able to get a nearly perfect circle. The only inconsistency I had in my project was where I started and stoped.

Scritto da: nayef mohammed

perfect

it's a great job

Scritto da: Dan

Great Tool????

Very easy to use

Scritto da: No BS Customer

Does the job without breaking the bank...

Satisfied with quality and overall design for the price...

Scritto da: Jai Sri Astrology

Finally a circle cutter

I am so thankful I finally found one of these Dremel accessory attachments circle cutters I have been needing something like this for so long I did not want to spend an arm and a leg to buy a router and in my artwork I am constantly needing to cut circles either out of the center of a piece of wood or cutting an outer circle into a piece of wood I have three different dremels and I thought surely this thing will fit on one of them I was a little concerned about the sturdiness of the wood cutting bit that came with it because I was cutting through an half inch piece of plywood however after I set it up and started my pilot holes and started cutting into the circle of wood it went smoothly the bit held up great and I cut a perfect circle out of the center of my wood I even turned around and tried it on a plastic decorative plate and it worked great on there so I would highly highly recommend this accessory if you are needing to cut circles and you don't want to spend an arm and a leg on a humongous expensive router this definitely worked I even bought a couple of extra wood cutting drill bits for my Dremel which is always good to have on hand because you never know when you'll break one but overall this was a great great buy for an excellent price

Scritto da: Rich

Works But not Stable.

Its ok very cheap material you need 3 hands to use.. if you buy ,,, buy clamps also..

Scritto da: Morgan Lee Jordan

Worked perfect for drywall hole for electrical box

So easy to cut a perfect hole in new drywall for an electrical box. I was working with a fairly small area and couldn’t have any room for error. This was exactly what I needed for precision, ease and confidence in safety.

Scritto da: ScienceFictionFantasyReader

Works roughly

It seemed a very useful tool to cut circles and straight lines. It does it but not 100% accurately as there some play in the height adjustment.

Scritto da: raj

Work well

The tool worked very well. I had to make cut outs in ceiling panels and it did a great job. Just make sure that you are using the right bit for the job.

Scritto da: Mario Cisneros Gonzalez

Que venga tal como se muestra en la promoción de venta

Recibí el producto pero falta la guía para corte recto que aparece en la foto de promoción del mismo, que puedo hacer al respecto?

Scritto da: Waysay

Hard to find item in hardware stores

Easy to use. Makes perfect circle

Scritto da: Mina

Très bon accessoire !! Facile à utiliser

Très bon outil , excellent pour faire des coupes circulaire avec précision