E-Z Lok ārējās vītnes ieliktnis, C12L14 oglekļa tērauds, atbilst AISI 12L14, M6-1.0 iekšējiem vītnēm, M10x1.5 ārējiem vītnēm, 10,49 mm garums, ražots ASV (5 pakojumā)

Name: E-Z Lok ārējās vītnes ieliktnis, C12L14 oglekļa tērauds, atbilst AISI 12L14, M6-1.0 iekšējiem vītnēm, M10x1.5 ārējiem vītnēm, 10,49 mm garums, ražots ASV (5 pakojumā)
Brand: E-Z LOK
SKU: 0839137001020
Price: 39.63 EUR
Availability: InStock

Brand:E-Z LOK

4/5

€
39.63

E-Z LOK vītņotie ieliktņi metālam nodrošina ērti lietojamu risinājumu metāla vītņoto caurumu labošanai vai nostiprināšanai. Ideāli piemēroti lietošanai metālos, piemēram, alumīnijā un čugunā, E-Z LOK vītņotie ieliktņi ir skrūvēti no cieta tērauda, lai nodrošinātu lielāku izturību un izcilu izvilkšanas pretestību. Standarta ārējās vītnes ļauj uzstādīšanai izmantot standarta urbjus un krānus. Kad caurums ir sagatavots, E-Z LOK tiek vītņoti caurumā kā parasts stiprinājums, izmantojot skrūvgriezi, skrūvi un pretuzgriezni vai izvēles E-Z LOK piedziņas instrumentu. E-Z LOK ir pašbloķējošas un neatkāpsies un nevibrēs. Iepriekš uzklāta līmjava aktivizējas uzstādīšanas laikā un pielīp praktiski pie visiem metāliem. Stiprinājums ir gatavs dažu minūšu laikā, līmi noslēdz pret šķidrumiem un gāzēm līdz 6000 psi spiedienam. pēc pilnīgas sacietēšanas (72 stundas).

Nav pieejama neviena vienība

EAN: 0839137001020

Kategorijas Industriālie un zinātniskie priekšmeti, vītnes, Skrūves un stiprinājumi, Griezes ieliktņi, Vītņotie ieliktņi,

Ražots Amerikā - spēcīgs, stingrs konstrukcijas dizains. Ideāli piemērots mīkstajiem metāliem, piemēram, alumīnijam, čugunam vai magnijam. Pašbloķēšanās; Iepriekš uzklātā līmjava aktivizējas uzstādīšanas laikā un ir gatava stiprinājumam 3–5 minūtēs. Instalējiet ar standarta urbšanu un tapšanu; NAV nepieciešami īpaši instrumenti. Viegli lietojams risinājums bojātu metāla vītņu labošanai.

Exterior Finish	Black Phosphate
Fastener Type	Thread Locking
Is Discontinued By Manufacturer	No
Item model number	450-6
Manufacturer	EZ-Lok
Material	Steel
Metal Type	Aluminum, Alloy Steel, Carbon Steel, Iron, Magnesium
Thread Size	M6 x 1

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: El mas ondeado

Triple check for treat,tap sizes

i use ez coil to reinforce walls on a aluminum block which had a broken screw ,fits perfectly

Scritto da: Anthony Frisco

saved my transmission!

I bought a used transmission from the junk yard that had a couple pan bolts stripped so I needed to repair them because transmission fluid was leaking out. I started of buying a cheap helicoil repair kit on ebay and tried using that first. if you are considering buying an ebay kit yourself do yourself a favor and DON'T! what started as a simple repair turned into a nightmare when the very tool that is supposed to fix threads destroyed them even more. boy was I in a pickle because now not only were the threads screwed up but now the hole was also bigger than it should. I was running out of options! luckily in my search for solutions I came a crossed these clever and yet simple inserts. These inserts are quality and don't need any of the expensive specialty tools that other common thread repairs do. I was able to fix the destroyed threads quickly and easily with just these inserts, a screwdriver, a common drill and bits, and regular tap set. they work great! no more stripped threads and no more transmission leak! what a relief! I definitely recommend them especially if you've already tried other thread repairs that didn't work and you think it might be beyond repair.

Scritto da: Lou

Good

Good product. Worked as expected

Scritto da: Steven L.

Much better than helicoil

After having a failed helicoil installation, these are much better and where I start with next time. No special tools needed, just the right drill bit size, which I got from HF.

Scritto da: Ryan

They worked perfectly for my application ????

This was the answer to my problem. Had a bolt break off in the crankcase on a quad. I wasn't able to get an easy out to work after drilling it and attempting unsuccessfully to back out the remaining threads. I started researching solutions and found these little beauties! I would highly recommend these.

Scritto da: F joe biden

drill size

these worked great. Had a stripped out bolt hole on the oil plate of a VW, drilled out installed this EZlock .All Good! a metric drill bit is probably your best bet , but if you only have sae bits ,an 11/32" works perfectly.

Scritto da: Tyler

Perfect fix!

These are the perfect fix for stripped out threads! Much better than a Helicoil and way cheaper than a Timesert. Worked great! You won't regret these.

Scritto da: Ernest E. Marks

perfect for aluminum thread repair

I repaired a helicoil repair gon bad on a 1981 Honda XL500R. It worked great. I believe this is the only way to go fo aluminum thread repair.