Komerciāls šefpavāra pārtikas žāvētājs, pārtikas un saraustīšanas žāvētājs, CCD100W6, 280 vati, balts

Brand:Commercial Chef

3.5/5

127.65

Pārvērtiet savus iecienītākos augļus, dārzeņus un gaļu par garšīgi veselīgām uzkodām ar šo izcilo COMMERCIAL CHEF pārtikas žāvēšanas mašīnu mājām. Ar temperatūras diapazonu no 104° līdz 158° F, jūs varat viegli noteikt labāko šī pārtikas dehidratora iestatījumu liellopu gaļas saraustīšanai, kaltētām sēnēm un pat garšaugiem. Pateicoties 5 paplāšu slāņiem, jūs varat nodrošināt vienmērīgu žāvēšanu un optimālu produktivitāti, izmantojot mūsu izcilo gaļas žāvētāju. Katra paplāte ir noņemama un mazgājama tikai ar rokām. Mūsu 280 W saraustītā dehidratora (9,92 x 9,43 x 7,01 collas) kompaktie izmēri ļauj ērti uzglabāt virtuvē. Iekļauts arī žāvēšanas ceļvedis tiem, kas ir jauni aizraujošajā dehidratatoru pasaulē.

VESELĪGAS UZkodas — mūsu neticamie pārtikas žāvēšanas aparāti palīdz jums izpildīt Jaungada apņemšanās, pagatavojot ātras, vienkāršas un veselīgas uzkodas. Šis pārtikas žāvētājs ir piemērots dažādiem mājās gatavotiem ēdieniem, piemēram, sēnēm un tītara gaļai, kā arī uzkodām, piemēram, banānu čipsiem, augļu sarullējumiem un liellopa gaļas saraustīšanai. VIEGLI UZGLABĀT UN TĪRĪT — mūsu fantastiskajā gaļas žāvētājā esošās paplātes ir mazgājamas tikai ar rokām, lai tās varētu viegli tīrīt un racionāli uzglabāt. Novietojiet šo pārtikas žāvēšanas mašīnu mājās savā virtuves pieliekamajā vai skapī, kad to neizmantojat. REGULĒJAMĀ TERMOSTATA DARBĪBA — šai žāvētāja iekārtai (3,3 mārciņas) ir regulējama temperatūra no 104° līdz 158 °F. Nosakiet optimālo iestatījumu un ļaujiet šim saraustītajam automātam paveikt visu jūsu vietā! 5 PALĀTŅU SLĀŅI — tiek uzskatīta par vienu no labākajiem pārtikas un saraustīšanas žāvēšanas līdzekļiem, un šī fenomenālā virtuves iekārta sastāv no 5 apaļām paplātēm, kas ir pietiekami, lai noturētu lielāko daļu pārtikas produktu un nodrošinātu vienmērīgu žāvēšanu. LIETOJIET AR SAVIEM MĪKĀKAJIEM Ēdieniem — šis komerciālais šefpavāra pārtikas dehidrētājs noņem mitrumu un fiksē jūsu iecienītāko uzkodu oriģinālās, niansētās garšas. Mūsu izcilais pārtikas žāvētājs (9,92 x 9,43 x 7,01 collas) ir aprīkots ar 280 W jaudu, lai saglabātu jūsu iecienītāko gaļu, augļus, dārzeņus, augļus un pat garšaugus.
Brand Commercial Chef
Color White
Country of Origin China
Customer Reviews 4.4 4.4 out of 5 stars 1,968 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Is Dishwasher Safe No
Item Dimensions LxWxH 9.92 x 9.43 x 7.01 inches
Item model number CCD100W6
Item Weight 3.3 Pounds
Manufacturer W Appliance Company
Material Plastic
Material Feature Food Safe
Number of Trays 5
Product Dimensions 9.9"D x 9.4"W x 7"H
Product Dimensions 9.92 x 9.43 x 7.01 inches
Shape Round
Temperature Range 158 Degrees Fahrenheit
Wattage 280 watts

3.5

9 Review
5 Star
70
4 Star
15
3 Star
7
2 Star
3
1 Star
6

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: remy
Works great to dry filiment
Just cut the supports out of the rings and it makes a great filament dryer. Set to 140 and in a few hrs your sloppy tpu is ready to use. You could probably make a ring to place the lid on pretty easy instead of cutting up the original pieces.
Scritto da: J.R.
It works
I was a little worried about the quality, but I’ve had it a few weeks, used it three times and it has been working great.
Scritto da: CJ McFalls
DIY 3D filament dryer!
I bought this to modify into a DIY 3D printer filament dryer. I had to cut all of the supports out of the shelves in order to fit a roll of filament, but this is a great, cheap, DIY alternative to the much more expensive dedicated filament driers. I can't speak to the function of this as a food dehydrator, but it's a great filament dryer!
Scritto da: Eric Witt
Size matters
Product worked well but when you have a stalk of bananas to dry it takes a few go-arounds
Scritto da: Elizabeth Brown
So far so good
Didn't expect it to be a small as it is but it works. So far so good
Scritto da: Peter Kwangjun Suk
So far, checks out as a 3D printer filament dryer
I've been running this for over two hours, with an oven thermometer in the modded chamber. Basically, I just put some corrugated cardboard and two layers of mylar bubble wrap insulation between one tray and the lid. (5" width. Takes about 31" length to make the cylinder.) I also ended up taping 4 of the 6 vent holes in the lid. The oven thermometer reads right at 50 Celsius, or 122 F, which is my target temperature. To get that, I ended up turning the knob just below the 140 degree mark. So temperature control isn't 100% accurate, but the temp seems to be stable. Adding the bubble wrap insulation seems to be a must. Before I added it, the chamber wall felt very warm, but with the bubble wrap, the outer temp feels not much more than room temp. Another 3D printer reviewer also used a cardboard chamber, but couldn't achieve his desired temperature. The increased surface area probably radiates heat away too fast for the heater to keep up. This makes me seriously question the value of this device as a food dryer, unless one makes a bubble wrap insulation couzy for the trays. Also, another reviewer talked about taping the vent holes up on the lid, after which some component melted. I think the blower/heater depends on airflow for cooling, so I wouldn't tape all of the holes up. In any case, I'm about to get my first filament spool to try drying it overnight.
Scritto da: Amazonuser5
Perfect for my use
I ordered this to dehydrate the lemons from my tree. So far I have found that using the temperature at 140 works well, but it takes two full days to get them completely dry. I don't mind the extra time as this helped them from turning brown. I have not tried on anything else... yet!
Scritto da: Morgan
Functional and good pricing.
Used this product for a few months now and it has been great! Does what it is supposed to do. Not the fanciest dehydrator but perfect for making a snack here and there.
Scritto da: K.
Wow, so happy with this dehydrator
This is the first dehydrator that I purchased mainly to make jerky since I am a big meat eater. The first day I made beef jerky, highest temp setting and in 3 hours it was ready to eat..so delicious. The next day I made porc jerky..just delicious!!! Rotate the trays every half hour or so so that everything dries evenly. I have been using it every day because I can't even keep the jerky around it gets eaten up too quickly no matter how much I make.

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array