LMT Onsrud 63-768 cietā karbīda spirālveida O flauta, collas, nepārklāta (spilgta) apdare, 21 grādu spirāle, 1 flauta, 2,0000 kopējais garums, 0,1875 griešanas diametrs, 0,2500 kāta diametrs 3/16

Name: LMT Onsrud 63-768 cietā karbīda spirālveida O flauta, collas, nepārklāta (spilgta) apdare, 21 grādu spirāle, 1 flauta, 2,0000 kopējais garums, 0,1875 griešanas diametrs, 0,2500 kāta diametrs 3/16
Brand: LMT Onsrud
SKU: 0895680016232
Price: 76.31 EUR
Availability: InStock

Brand:LMT Onsrud

2.8/5

€
76.31

Mīksta plastmasa, kas izstrādāta, lai nodrošinātu gludu apdari mīkstajai plastmasai ar šķembu noņemšanu uz augšu. Izmanto HDPE, HIPS, UHMW, ABS, polikarbonāta, PE, polistirola, polipropilēna, acetāla, akrila, PET un cietām virsmām.

Nav pieejama neviena vienība

EAN: 0895680016232

Kategorijas Industriālie un zinātniskie priekšmeti, Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Routeru daļas un piederumi, Router Bits, Iztaisnotie, Spirālveida un apdares uzgaļi, Spirālveida,

Viena flauta, 21 grādu leņķis. Darbinot pretēji pulksteņrādītāja virzienam (griešana ar labo pusi), spirālveida rievojumu instrumenti izvada skaidas uz augšu un no griezuma, lai samazinātu aizsērēšanu. Apaļie kāti ļauj izmantot ar dažādām instrumentu turēšanas sistēmām. Nepārklātiem instrumentiem ir tikai pamata substrāts bez papildu apstrādes vai pārklājumiem, un tie ir piemēroti plašam lietojumu klāstam. Cietā karbīda instrumenti nodrošina ilgu instrumenta kalpošanas laiku un lielāku griešanas ātrumu nekā citas pamatnes, taču tie ir trauslāki un jāizmanto ar stingrām instrumentu turēšanas sistēmām.

Country of Origin	USA
Cutting Diameter	0.19 Inches
Cutting Length	0.63 Inches
Domestic Shipping	Item can be shipped within U.S.
Finish Type	Uncoated
Finish Type	Uncoated (Bright)
International Shipping	This item can be shipped to select countries outside of the U.S.
Item model number	63-768
Manufacturer	LMT Onsrud
Material	Carbide
Number of Flutes	1
Product Dimensions	4 x 0.5 x 0.5 inches; 0.8 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: R. A. Jones

Nice cutter, shank is 1/4" despite the title and photo.

The title is a bit off because it says the shank is 0.125" when the specs say the shank is 1/4". The photo also shows a cutter with the shank diameter the same as the cutting diameter. It IS, however, 1/4" shank. I use it on a smallish CNC router with a 2hp spindle and it's worked quite well. In soft plastics like ABS I initially had the chip winding around the shank, melting and make a truly horrible cut. I built a new dust shoe to dramatically increase the air velocity around the cutter and with that dust shoe to keep the chips clear this cutter has worked very well.

Scritto da: Mississippi

Good bit

Nothing wrong with this one

Scritto da: Paul Haiducu

Arrived damaged!

I am not an expert in this, but the shop teacher I have worked with to drill holes in an aluminum plate tells me that the bit is damaged and cannot be used. Unfortunately, we have not carefully looked at the bit when it arrived (ordered on May 23, 2019), hence it is too late to return it or exchange it. It took the teacher a while to find time for the project I wanted done (we had the summer off, traveling, etc.). Yesterday, he realized that the bit is no good. The bit has not been used (and the shop teacher tells me that is obvious). These are not cheap, I am out almost $30.

Scritto da: Andrew D. Mowry

The description for this is incorrect. The 1/8” bit ...

The description for this is incorrect. The 1/8” bit has a 1/4” shank, not 1/8” as described and shown in the photo.

Scritto da: Seein Stripes

Great for HDPE on Bob's CNC E3

I now have about 20+ hours on the bit cutting and drilling .375" Starboard HDPE. I can say it is RAZOR sharp since it sliced my finger like a scalpel trying to remove some plastic shavings from around the bit. Runs straight and true at 45 ipm on my Bob's CNC machine.

Scritto da: Gary

This is the best bit I ever used on this material

I cut an aluminum composite material with this bit. The material is 2 aluminum skins bonded to a plastic center. This is the best bit I ever used on this material, a very clean, effortless cut.

Scritto da: Eric Varsanyi

Great cutter, clean edges on acrylic

This cuts acrylic like butter and leaves a very nice edge. I'm running a router at 18000 RPM with a feed rate of around 70 IPM and .06 depth cuts in cast acrylic.

Scritto da: bookbound93

Not 1/8 shank

Nice cutter, but needed a 1/8 shank and this is a 1/4 shank. Not happy.