MG Chemicals 1035-80 ml nekodīgs caurspīdīgs, 1-daļīgs RTV silikona līmējošais hermētiķis, 85 ml caurule

Brand:MG Chemicals

3.1/5

52.94

Smērējama, nekodīga, caurspīdīga pasta. Lieliski piemērots elektronisko komponentu blīvēšanai un savienošanai ar iespiedshēmu platēm un elektronisko detaļu bloku vara savienojumu aizsardzībai. Lieliski piemērots kā laikapstākļu necaurlaidīgs hermētiķis, kur strāvas vadi nonāk motoros. Izmantot kā blīvējumu necaurlaidīgam blīvējumam un izolācijai. Saglabā elastomēra īpašības ilgu laiku temperatūrā no -60 ° C līdz 204 ° C (-75 ° F līdz 399 ° F). Ieteicams izmantošanai jūrā. Izceļas ar augstu izturību, nav korozijas. 1,04 īpatnējais svars. 15 min brīvais laiks. 12-24 stundu sacietēšana laika gaitā. 21 (Šors A) cietība. 1,896 MPa (275 psi) stiepes izturība. 500 procentu pagarinājums. 7,1 kg/cm (40 lb/in) plīsuma izturība. 8 kg/cm (47 mārciņas/in) atdalīšanas izturība. 2 x 10(15) omi.cm tilpuma pretestība. 16,8 kV/mm, 425 V/mil dielektriskā izturība. 2,8 pie 100 Hz dielektriskās konstantes. 0,06 W/m. pakāpe K siltumvadītspēja. -60°C (-75°F) trausls punkts. 3,0 x 10(-4) mm/mm/°C. 480 g/min Viskozitāte (pie 25°C). Lieliska ķīmiskā izturība. Modificēta alkoksi (neitrāla) konservēšana. Adhēzija bez gruntskrāsām. UL HB atzīšana un UL fails Nr. E36952. Saderīgs ar ROHS.

Ieteicams izmantošanai jūrā. Izmantot kā blīvējumu necaurlaidīgam blīvējumam un izolācijai. Lieliski piemērots kā laikapstākļu necaurlaidīgs hermētiķis, kur strāvas vadi nonāk motoros. Lieliski piemērots elektronisko komponentu blīvēšanai un savienošanai ar iespiedshēmu platēm un elektronisko detaļu bloku vara savienojumu aizsardzībai. Smērējama, nekodīga, caurspīdīga pasta.
Brand MG Chemicals
Color Translucent
Compatible Material Copper
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item Form Liquid, Paste
Item model number 1035-80ML
Manufacturer MG Chemicals
Material Silicone
Product Dimensions 1.51 x 6.55 x 2.02 inches; 3.1 Ounces

3.1

11 Review
5 Star
51
4 Star
20
3 Star
12
2 Star
18
1 Star
0

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: WILDBOT3D
Always great quality from MG Chem.
Works great. Deducting a star because it comes in a metal tube which will probably lead most of it drying up. I realize a plastic tube might not be an option for this stuff but it looks like it's in a plastic tube and that was part of the reason I bought it. I hate metal tubes. They always get a pin hole in them causing the contents to leak out or dry up.
Scritto da: prionbrain
Like it!
Worked great for sealing a phone I recently changed the screen on - but I haven't checked if it is waterproof ...I wish it had a smaller applicator, but either way it worked good! I used a heat gun at a low setting... I don't know if that works well or not- but the phone is closed and works!:)
Scritto da: Wm L
New unopened tube is hard as a rock.
Broke the seal on a new unopened tube and had to squeeze the bejesus out of it to get any silicone out of it. It feels like 80% of the contents are already cured inside the tube. Can't flatten the tube. Very old stock???
Scritto da: m98lee
I understand that ordinary RTV (the kind that smell like vinegar) can promote rust
I wanted a corrosion-free adhesive sealer around the nylon plugs I used to fill in holes left by a roof rack on my car. I understand that ordinary RTV (the kind that smell like vinegar) can promote rust. This has sealed and adhered well so far...
Scritto da: Eddy Hicks
Good stuff, scary warnings
Probably no more risky than other brands but this comes with incredibly serious health warnings. The one that really caught my eye was something to the effect of "don't remove contaminated clothing from the work area". I think I'll be using gloves with this ????
Scritto da: William Blake
Excellent product but needs applicator tip
Would have given product 5 stars but product needs an applicator tip especially when using around electronic components. Otherwise, product excells where applied and has very low odor.
Scritto da: Bill In Beaverton
No Nozzle, "Non-standard" Threads
This just arrived. I did not read the answers to the posted questions carefully enough. Not only does it not come with a conical cut-to-diameter nozzle, it has oversized "non-standard" threads on the top. You will not be able to use a screw-on nozzle left over from that conventional RTV silicone tube you bought at the hardware store. I would send it back, but Amazon would probably make me pay the shipping, since I can't truly say it is defective or not-as-advertised. Not worth it. Sadly there is no way to apply it where I want to use it without making a mess. For reference: The threads on the top are approximately .552 in. major diameter, 14 TPI; or 14 mm major diameter, 1.75 mm pitch. The metric pitch looks a bit closer to right. It is hard to tell. There are only about 4 turns of thread, and they are asymmetric, steeper on the tube side than on the end side. (14 TPI = 1.81 mm pitch.)
Scritto da: Hupperware
Awesome
Used on a printed circuit board (PCB) to secure solder joints and wires in a high torque application. Goes on easy and dries clear.
Scritto da: David Hicks
Safe for waterproofing/sealing electronics
Regular silicone sealant/caulking will corrode metals in components/circuits so this is essentially if you want to waterproof electronics. In my case I was sealing strip lights that we're going outside. Use in a well ventilated area and wear gloves - the MHDS makes this stuff sound pretty intense. Includes a screw on nozzle which can be removed/cleaned for reuse. Is fairly thick and difficult to squeeze out of the tube. Nozzle makes for easy precision application. Dries quickly (under an hour) and it flexible when dry. Doesn't deal well with mechanical abrasion (kind of crumbles off) and may not adhere well to some plastics but does perform well on stable/static applications.
Scritto da: Amazon Customer
Silicone works well for bonding various stuff together. I ...
Silicone works well for bonding various stuff together. I use this for iPad Glass repair. Keep in mind the shelf life of Silicone can be short as it has a tendency to cure inside the bottle if left long enough. So use it within a month or so. Don't buy it just to stock it, otherwise when you need it it may have cured already.
Scritto da: Jaylon
Ok
Ok

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array