0
0

Kopā:€ 0.00

Skatīt grozuIzrakstīties
LoginRegister
0

Kopā:€ 0.00

Skatīt grozuIzrakstīties
LoginRegister

PC Products PC-Clear epoksīda līmes šķidrums, 16 unces divās pudelēs, caurspīdīgs 70161 16 unces divas pudeles 1

Brand:PC Products

3.4/5

€
64.88

PRODUKTA APRAKSTS PC-Clear ir pilnīgi dzidrs šķidrs epoksīds. PC-Clear ir izstrādāts tā, lai saglabātu dzidrumu sacietēšanas laikā un pēc tā. PC-Clear ir ļoti izturīgs un elastīgs, padarot to atšķirībā no daudziem šķidriem epoksīdiem. Ja nepieciešams maskēt remontu vai krāsu neesamību, PC-Clear ir jūsu izvēlētais produkts. PC-Clear demonstrē izcilu ķīmisko izturību pret maigām skābēm, kodīgām vielām, mazgāšanas līdzekļiem, benzīnu, mazutu, sāli un saldūdeni. Piezīme: PC-Clear nesaistīsies ar vaska papīru, teflonu, polietilēnu un dažām citām plastmasām. Ir simtiem plastmasu tūkstošiem kombināciju. Ja rodas šaubas, pārbaudiet nelielu laukumu. Ieteikums: Lūdzu, ņemiet vērā, ka PC-Clear sasilst, kad tas sacietē. Tas, cik silts tas kļūst, lielā mērā ir atkarīgs no sajaukto sveķu un cietinātāja daudzuma. Jo lielāks daudzums, jo lielāks ir ģenerētā siltuma daudzums un iespējamā temperatūra. Samaisa uz līdzenas virsmas vai izmantojot statisko mikseri. Esiet piesardzīgs, uzklājot uz karstumjutīgiem objektiem. Valkājiet cimdus un izvairieties no nokļūšanas uz ādas vai acīm. NO RAŽOTĀJA PC-Produkti, kas svin 75 gadus “Fixing Your Things”, ar kvalitatīviem, uzticamiem remonta produktiem. Remonta risinājumi gandrīz visam, kam nepieciešams remonts vai ko varat salauzt. No betona līdz koka restaurācijai un lieljaudas pastāvīgajiem remontdarbiem mēs jums nodrošināsim. Jā; Mēs varam to salabot

Summa
Pievienot grozamPērc tagad

EAN: 313913208617

Kategorijas Industriālie un zinātniskie priekšmeti, Līmvielas, Blīves un smērvielas, Cianakrilāta adhezīvi,

Veido stingru saiti, lai nodrošinātu izturību. Nodrošina darbības laiku aptuveni 4 minūtes, sacietēšanas laiku funkcijai 1 stundu un pilnu sacietēšanas laiku 24 stundas. Nepārtraukta ekspluatācijas temperatūras diapazons no -20 līdz +200 grādiem F. Sajaukšanas laikā tas sākotnēji kļūst necaurspīdīgs, pēc tam dzidrs līdz pilnīgai sacietēšanai, lai sajauktos ar saistīto materiālu. Caurspīdīgs epoksīda līmes šķidrums savieno koku, metālu, stiklu, keramiku, betonu un audumu.
Brand PC Products
Color Clear
Compatible Material Wood, Glass, Ceramic, Concrete, Metal
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item Form Liquid
Item model number 70161
Manufacturer Protective Coating Co.
Material Liquid
Product Dimensions 7.25 x 4 x 4 inches; 1.37 Pounds

3.4

10 Review
5 Star
66
4 Star
19
3 Star
9
2 Star
0
1 Star
6

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Gary96825
Great epoxy for repairing concrete cracks.
I’m in the middle of repainting our concrete pool deck and the last time I did this I use a latex filler for crack repair. That lasted a year or so before cracking again. While I can’t say how long this repair will last, the epoxy is significantly harder and sets into place much better than the latex paste. One drawback, it will take some grinding work to ensure the epoxy paint I’ll use will adhere to the slick surface. If this works, it’ll provide a much longer lasting, better looking repair.
Scritto da: Benjamin W.
Working time is too short to achieve both proper mixing and application.
When this product is mixed thoroughly, it performs well, but if you want to pour it, or work it into cracks, the mixing process is too time consuming for the amount of remaining work time. I needed to mix most of the 16 ounces, so I could pour the product into fairly large voids, so I short-circuited the recommended mixing instructions, in order to have more time for my pour and application. That turned out to be a problem. In some areas of my project, where A & B were not adequately present/mixed, the end result was that it did not harden, and remained somewhat sticky. I used this on a piece of apple wood I began turning on a lathe. There were parts of the wood compromised by rot and powder beetle tunnels, as well as bark space overlapped by other wood growth. For the most part, the pour went well, but the material that was not mixed properly, did not harden, and the result was that it did not "tool" smoothly, and it did not attach well to adjacent surfaces. So, I tried again on cracks that were revealed with more turning. I tried mixing a smaller amount. I tried to be more intent in the mixing process (which took longer). I was only a few minutes into the spreading of the product into holes and cracks, when a chunk appeared. Realizing it was beginning to harden, I worked feverishly to use product that was still liquid, but alas, I was only able to use about 80% of my mix before it got very hot, and hardened to the point it was not usable. I will admit, this is my first time attempting this kind of work with epoxy resin, so I don't know if there is a product out there that would be easier for me to get a "total mix" and still have enough open working time to get it applied. I wanted to include pictures, but am not savvy enough to know how to bring them over. Sorry. Ben
Scritto da: Jo
Not for areas that get frequently water drenched
It does stop the water from leaking, but this epoxy’s bought to seal and appear clear on a granite backsplash against granite countertop. It is clear when dry, but if the water, (from the faucet use), splashes on it and is allowed to stand, the epoxy turns milky-whitish, and is unsightly. Not buying it again.
Scritto da: Alan M. Gladstone
Not for gluing thin pieces.
I love PC PRODUCTS. This was a bit disappointing; it did not hold a glued up stone dish. Possibly it was my error- but even with a “ constructed jig” , clamping , and 24 hour dry time, it was a fail. I think it is still a very good epoxy; just needs sufficient surface area in order to hold.
Scritto da: Sideschulmpf
works fine
Glued marble together to build a bull nose counter top
Scritto da: J. Saunders
Pottery repair
This is a great product. Repaired broken pottery and this was suggested. Did a fantastic job.
Scritto da: Marge B
A little tricky to keep 50/50. But, even ...
A little tricky to keep 50/50. But, even if off ratio, it still cures - just a little slower. I used it to repair stress splits in an exterior table top. Once the cracks were filled, I top coated with Ephanies (sp?) exterior spar varnish. I'll know if is OK for exterior applications in about a year. I'll purchase this product again.
Scritto da: dsmblue
Great control and works as desired
Works as intended. Like the fact that you have separate containers for better control over glue output than you get with plunger type epoxies.
Scritto da: denis troesch
Great product
works great drys hard and clear
Scritto da: andy
Not very strong
No as strong as I expected.

Saistītie produkti

hot
Elmer's E3860 universālā līme, 1 galons, balta 1 gal līme
3.8/5

€ 62.37

Elmer's E3860 universālā līme, 1 galons, balta 1 gal līme
3.8/5

€ 62.37

hot
J-B Weld 33120H SuperWeld līme - caurspīdīga superlīme - 20 g 20 grami
3.6/5

€ 26.29

J-B Weld 33120H SuperWeld līme - caurspīdīga superlīme - 20 g 20 grami
3.6/5

€ 26.29

hot
Gorilla Super Glue, četras 3 gramu tūbiņas, caurspīdīga, (1 iepakojumā) 1 — līmes iepakojums
3.8/5

€ 16.26

Gorilla Super Glue, četras 3 gramu tūbiņas, caurspīdīga, (1 iepakojumā) 1 — līmes iepakojums
3.8/5

€ 16.26

hot
Gorilla Super Glue XL, 25 grami, caurspīdīga, (1 iepakojumā) 1 — iepakojums
3.8/5

€ 28.44

Gorilla Super Glue XL, 25 grami, caurspīdīga, (1 iepakojumā) 1 — iepakojums
3.8/5

€ 28.44

hot
Gorilla Super Glue, 20 grami, caurspīdīga, (1 iepakojumā) 1 — iepakojumā
3.7/5

€ 28.44

Gorilla Super Glue, 20 grami, caurspīdīga, (1 iepakojumā) 1 — iepakojumā
3.7/5

€ 28.44

hot
Gorilla Super Glue gēla pildspalva, 5,5 grami (1 iepakojumā) 1 — iepakojums
3.5/5

€ 26.32

Gorilla Super Glue gēla pildspalva, 5,5 grami (1 iepakojumā) 1 — iepakojums
3.5/5

€ 26.32

hot
Gorilla Micro Precise Super Glue, 6 grami, caurspīdīga, (1 iepakojumā) 1 — iepakojums
3.7/5

€ 27.90

Gorilla Micro Precise Super Glue, 6 grami, caurspīdīga, (1 iepakojumā) 1 — iepakojums
3.7/5

€ 27.90

hot
3M Scotch-Weld plastmasas un gumijas momentlīme PR100, dzidra, zema viskozitāte, ātrs apstrādes laiks un sacietēšana, 500 g (1,10 lb) pudele, 1 kaste
0.1/5

€ 478.25

3M Scotch-Weld plastmasas un gumijas momentlīme PR100, dzidra, zema viskozitāte, ātrs apstrādes laiks un sacietēšana, 500 g (1,10 lb) pudele, 1 kaste
0.1/5

€ 478.25

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array

Kopā:€ 0.00

Skatīt grozuIzrakstīties

Kategorijas

Visas kategorijas
Izvēlne Kategorijas Netālu Ratiņi

Menu