Pond Armor SKU-TAN-QT-R netoksiska dīķa vairoga epoksīda krāsa, 1,5 kvarta, dzeltenbrūns

Brand:Pond Armor

3.4/5

126.57

Pond Shield ir netoksisks epoksīda oderējums, kas ražots ASV un paredzēts dīķu un ūdenstilpņu nozarei. To izmanto, lai hidroizolētu un noslēgtu ūdens objektus vai dīķus ar dizainiskāku, formālāku vai dabiskāku izskatu nekā gumijas starplikas. Izmantojot Pond Shield epoksīdu, vairs nebūs neizskatīgu kroku vai kroku. Turklāt, atšķirībā no gumijas starplikām, ir pieejamas vienpadsmit standarta krāsas - melna, ogļu pelēka, šokolādes brūna, dzidra, konkursa zila, delta zila, pelēka, sūnu zaļa, debeszila, dzeltenbrūna un balta. Dīķa vairogs tiek izmantots strukturētu virsmu hidroizolācijai ūdens objektos, piemēram, Koi dīķos, baseinos, strūklakās, akvārijos, sālsūdens tvertnēs, hidroponikā, strautos, ūdenskritumos, atstarojošos baseinos, mini ezeros, rezervuāros utt. Tas ir viegli uzklājams un viegli uzklājams. Lai uzturētu un vairumam lietojumu, pietiek ar vienu kārtu, lai nodrošinātu pareizu pārklājumu. Turklāt jūsu dīķim praktiski nebūs nepieciešama apkope ar virsmu, no kuras var viegli noslaucīt aļģes, un tas ir drošs zivīm (un citiem savvaļas dzīvniekiem) un augiem. Dīķa vairogs piedāvā gan izturību, gan elastību pārklājumā, stiprību un elastību, kas tiek pārbaudīta no -78 °F līdz 140 °F. Pond Shield ir epoksīda dīķa oderējums, kas ir īpaši izstrādāts, lai savienotos ar porainiem vai noberztiem materiāliem, piemēram, betons, koks, akmens, vairums metālu (apstrādāti un neapstrādāti), ķieģeļi, lielākā daļa izciļņu plastmasas, flīzes un daudzi citi. Ar stiepes saiti, kas ir spēcīgāka par betona iekšējo izturību, viens Pond Shield epoksīda slānis pielīps pie tā, uz ko to uzklājat. Laika gaitā betona, javas vai javas šuvēs var veidoties plaisas. Būdams elastīgs, Pond Shield ir izturīgs pret plaisāšanu šajās vietās un nodrošina vislabāko iespējamo pārklājuma aizsardzību.

Var uzklāt uz jebkuras konstruētas virsmas, kas izgatavota no koka metāla vai akmens, kā arī uz vairuma plastmasas un citu pārklājumu. Var nodot ekspluatācijā 24 stundu laikā. Pašgruntējošā formula nodrošina uzticamu saķeri ar gatavu virsmu, kuru ir viegli kopt. Īpaši izstrādāts lietošanai zem ūdens, lai tas nebūtu toksisks un nekaitīgs zivīm un augiem. Ūdensnecaurlaidīga formula, kas piemērota lietošanai dažādās klimatiskajās vidēs, sākot no karstiem līdz sasalšanas/atkausēšanas apstākļiem.
Age Range (Description) Adult
Brand Pond Armor
Color Tan
Customer Reviews 4.4 4.4 out of 5 stars 136 ratings 4.4 out of 5 stars
Finish Type Gloss
Full Cure Time 24 Hours
Indoor/Outdoor Usage Outdoor
Is Discontinued By Manufacturer No
Is Waterproof True
Item Form Liquid
Item model number SKU-TAN-QT-R
Item Volume 1.5 Quarts
Item Weight 0.01 ounces
Manufacturer Pond Armor
Model Name SKU-TAN-QT-R
Package Information Can
Product Dimensions 11.5 x 5.5 x 5.5 inches
Size 48 Fl Oz
Size 48 Fl Oz (Pack of 1)
Special Feature Non Toxic
Specific Uses For Product Interior/Exterior
Surface Recommendation Concrete
Unit Count 1.0 Count

3.4

11 Review
5 Star
67
4 Star
19
3 Star
7
2 Star
2
1 Star
5

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Amazon Customer
Pond paint
So far so good the paint is really thick how to thin down with alcohol the first time trying to paint was rough after I send it down it went on real nice not sure how long it’s going to last just put it on will see you next year
Scritto da: Kieran
Pretty good product
I used this to coat a plywood terrarium that will hold hermit crabs. The cans are not easy to manage, it gets everywhere, but once out of the cans it's easy to mix. I used 91% isopropyl alcohol to thin the mixture. My only complaint is that it didn't cover as much as it was supposed to (60 sq ft). Otherwise, I would recommend and use it again.
Scritto da: Sundown
Works well, but pay attention to the working time
This is easy to mix and use, and the two parts will remain usable in their cans if you don't need it all at once. The working time of epoxy is about 20 minutes, so depending on what you're doing, you may or may not be able to spread it all before it hardens. In my experience, it goes from liquid to chunky to unusable in about three minutes on a warm day. It has a glossy finish when hardened.
Scritto da: Manuel
Works great
It works great just don't mix too much. It dries really quick. It creates heat when mixed so don't mix it all at once unless your going to pour it out and spread it all.
Scritto da: Amazon Customer
Good quality
Was perfect for my fountain
Scritto da: LoneWolfe
This Did The Job!
I used this for sealing a leaking fountain. I followed the directions precisely and the results were excellent. No more leaks! Having colors (including clear) other than black or white is a big plus, I chose tan. For those that have remarked about the coverage not being 60 square feet for the 1.5 quart kit, I would agree. But remember, the 60 square feet was simply based on the thickness of the coat. If the coat thickness is .02 inches instead of .01 inches (10 mil), the coverage drops to 30 square feet. I had a fairly small project so coverage was not an issue. The thickness on the bottom of the fountain had to be at least .125 inches. Still, I think the manufacturer should make the coverage value 30-60 square feet. One final note. Work fast with this stuff because when it starts to set, the painting is over.
Scritto da: Tony from Florida
What a life saver and a $$$ saver!
What a life saver. My pool's fountain developed a few leaks in the basin of the fountain over the years. It got bad this year. I talked to a contractor who wanted a small fortune to fix the leaks. After a little investigation I ran into this product and a few nice reviews. I bought this, read the instructions, mix the epoxy and hardener, and painted 2 coats on the basin waiting for the 1st coat to dry. You have to work quickly due to how quick the hardener dries. 2 months have gone by and not one drop of pool water has leaked out. I did find that it took about 1/3 to 1/2 of the epoxy to put the two good coats on and area of about 3 square feet. If, in the future, it develops another leak I have enough to coat it again.
Scritto da: Fly Guy
No leaks!
I haven't worked with epoxy much, so I can't compare pond Armor epoxy to any other, but if results are what count, I glad I finally bought this epoxy! The concrete spillway between my ponds had been leaking for years, and I had to refill the lower pond after only a few hours. After power washing the whole area to get rid of built-up gunk, I carefully rolled a double coat of Pond Armor epoxy onto the spillway and the leaks are gone! I can now run the waterfall all day without significant water loss. I'm delighted!
Scritto da: Robert Boucher
It was missing the second can!
The product was only half inside. Only had one can when it clearly should have had two. Update: They replaced the second can when shipping weight was clearly half what it should have been.
Scritto da: Kam Leung
Good products
Very good product
Scritto da: Karen Goreham
Big colour
Cover good

Saistītie produkti

hot

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array