Prime-Line GD 12234 garāžas durvju vērpes atspere, 0,250 x 2 collas x 32 collas, zaļa, labās puses vējš 32 collas, zaļa

Name: Prime-Line GD 12234 garāžas durvju vērpes atspere, 0,250 x 2 collas x 32 collas, zaļa, labās puses vējš 32 collas, zaļa
Brand: PRIME-LINE
SKU: 0885130433917
Price: 138.74 EUR
Availability: InStock

Brand:PRIME-LINE

3.5/5

€
138.74

PRODUKTA APRAKSTS Šī vērpes atspere ir izgatavota no tērauda, un tajā ir stacionārs konuss un tinuma konuss, kas piestiprināts atsperes pretējiem galiem. Šāda veida vērpes atsperes nodrošina celšanas spēku smagiem garāžas vārtiem, un tās jāizvēlas pēc atsperes izmēriem, nevis pēc durvju svara. Skatiet produkta specifikācijas ar ilustrācijām, kas atrodamas Prime-Line vērpes atsperu izvēles rokasgrāmatā, lai pārliecinātos, ka ir izvēlēta pareizā rezerves atspere. Divu atsperu uzstādīšanas gadījumā ņemiet vērā, ka ir obligāti pareizi jāizmanto LEFT WIND un RIGHT WIND atsperes. Turklāt, ja ir iesaistītas divu atsperu instalācijas, ir svarīgi nomainīt abas atsperes, jo, nomainot tikai 1 atsperi, var palielināties spriedze vecākajai nenomainītajai atsperei. Šī vērpes atspere ir regulāra darba atspere, kuras paredzamais kalpošanas laiks ir 10 000 ciklu. Svarīgs drošības pasākums: visa bojātā vai nepareizi funkcionējošā aparatūra ir jāaizstāj ar atbilstošu aparatūru, neveicot nekādas izmaiņas. Šīs garāžas durvju vērpes atsperes var izraisīt nopietnus savainojumus, ja tās netiek pareizi apstrādātas un uzstādītas. Ja mēģināt pats nomainīt vērpes atsperes, ir svarīgi, lai vērpes atsperu noņemšana vai regulēšana netiktu veikta ar citu instrumentu, izņemot Prime-Line preces numuru GD-52238. Ja šo atsperu nomaiņai neizmantojat Prime-Line preces numuru GD-52238, var tikt gūti smagi miesas bojājumi. Šie tinumu stieņi tiek izmantoti, lai uztītu un atvienotu vērpes atsperu spriegojumu, un tie ir vienīgie šim nolūkam ieteicamie instrumenti. Piezīme: Lai noteiktu vērpes pavasara vēja virzību, apskatiet atsperes galu ar atsperes “pirkstu” vēja augšpusē. Kad pavasara beigas ir 12:00 bieži pulkstenis un tas ir vērsts uz kreiso pusi, pavasaris ir labais vējš; ja atsperes gals norāda uz labo pusi (novietots 12:00 bieži.pulkstenis) tas ir kreisais vējš. Stāvot garāžā, skatoties ārpusē, vērpes atspere ar melni krāsotu tinuma konusu tiek uzstādīta durvju labajā pusē, bet vērpes atspere ar sarkani krāsotu tinuma konusu tiek uzstādīta durvju kreisajā pusē. NO RAŽOTĀJA Šī vērpes atspere ir izgatavota no tērauda, un tajā ir stacionārs konuss un tinuma konuss, kas piestiprināts atsperes pretējiem galiem. Šāda veida vērpes atsperes nodrošina celšanas spēku smagiem garāžas vārtiem, un tās jāizvēlas pēc atsperes izmēriem, nevis pēc durvju svara. Skatiet produkta specifikācijas ar ilustrācijām, kas atrodamas Prime-Line vērpes atsperu izvēles rokasgrāmatā, lai pārliecinātos, ka ir izvēlēta pareizā rezerves atspere. Divu atsperu uzstādīšanas gadījumā ņemiet vērā, ka ir obligāti pareizi jāizmanto LEFT WIND & RIGHT WIND atsperes. Turklāt, ja ir iesaistītas divu atsperu instalācijas, ir svarīgi nomainīt abas atsperes, jo, nomainot tikai 1 atsperi, var palielināties spriedze vecākajai nenomainītajai atsperei. Šī vērpes atspere ir regulāra darba atspere, kuras paredzamais kalpošanas laiks ir 10 000 ciklu. Svarīgs drošības pasākums: visa bojātā vai nepareizi funkcionējošā aparatūra ir jāaizstāj ar atbilstošu aparatūru, neveicot nekādas izmaiņas. Šīs garāžas durvju vērpes atsperes var izraisīt nopietnus savainojumus, ja tās netiek pareizi apstrādātas un uzstādītas. Ja mēģināt pats nomainīt vērpes atsperes, ir svarīgi, lai vērpes atsperu noņemšana vai regulēšana netiktu veikta ar citu instrumentu, izņemot Prime-Line preces numuru GD-52238. Ja šo atsperu nomaiņai neizmantojat Prime-Line preces numuru GD-52238, var tikt gūti smagi miesas bojājumi. Šie tinumu stieņi tiek izmantoti, lai uztītu un atvienotu vērpes atsperu spriegojumu, un tie ir vienīgie šim nolūkam ieteicamie instrumenti. Piezīme: Lai noteiktu vērpes pavasara vēja virzību, apskatiet atsperes galu ar atsperes “pirkstu” vēja augšpusē. Kad pavasara beigas ir pulksten 12:00 un tas ir vērsts uz kreiso pusi, pavasaris ir labais vējš; ja atsperes gals ir vērsts pa labi (novietots plkst. 12:00), tas ir kreisais vējš. Stāvot garāžā, skatoties ārpusē, vērpes atspere ar melni krāsotu tinuma konusu tiek uzstādīta durvju labajā pusē, bet vērpes atspere ar sarkani krāsotu tinuma konusu tiek uzstādīta durvju kreisajā pusē.

Summa

Pievienot grozam Pērc tagad

EAN: 0885130433917

Kategorijas instrumenti un mājokļa labiekārtošana, Būvmateriāli, Būvmateriāli, Durvis, Garāžu durvis, Openers & Parts, Apdare, Springs & Wires,

2 collas iekšējais diametrs. Labās puses vēja atsperes ir uzstādītas pa kreisi no centra (skatoties no garāžas iekšpuses, skatoties uz āru). Pavasarī ir iekļauti stacionāri un tinumu konusi, nomaiņai nepieciešams izmantot/iegādāties Prime-Line daļu GD-52238 un skaidru izpratni par stieples izmēru un nodošanu. Ja ir izmantotas divu atsperu instalācijas, viena un tā paša darba laikā ir svarīgi pareizi uzstādīt gan kreiso, gan labo vēja atsperes. 0,250 collu stieples izmērs x 2 collas iekšējais izmērs x 32 collas garums ar zaļas krāsas kodu. Izmanto dažādi garāžu durvju ražotāji.

Batteries Included?	‎No
Batteries Required?	‎No
color	Green
Color	‎Green
Country of Origin	‎USA
Customer Reviews	4.5 4.5 out of 5 stars 354 ratings 4.5 out of 5 stars
Finish	‎Green
Included Components	‎Garage door torsion spring
Is Discontinued By Manufacturer	‎No
Item model number	‎GD 12234
Item Package Quantity	‎1
Item Weight	‎12.6 pounds
Manufacturer	‎Prime-Line Products
Material	‎Steel
Measurement System	‎Inch
Part Number	‎GD12234
Product Dimensions	‎2.81 x 34.62 x 4 inches
Size	‎32 in.
Warranty Description	‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Jr.

Exact Replacement Right-Hand Spring for 7ft Garage Door

This is the exact replacement torsion spring for my 7ft garage door. It has the exact identical specifications as the old one – (.250 inch x 2 inch x 32 inch). This is the “right-Hand wind” spring, which is the one on the left side if you’re looking at both springs from the inside and standing under the garage door opener. I really can’t say much about build quality but comparing it to the one being replaced that lasted over 15 years, this Prime-Line spring just looks and feels of a far better product overall and should last just as long, if not longer. As for installation, for the DIY savvy replacing a garage door torsion spring can take time but isn’t as hard. Understanding the process and exercising caution especially winding the springs is a must, as well as using the right tools for the job. For the non or limited DIY savvy folks, replacing such spring can be dangerous and isn’t a beginner’s project. It is best handled by professionals or more experienced individuals.

Scritto da: daryl

the cost and fast shipping

easy to install and cheaper than being forced into calling the professionals who will charge you a leg and arm for parts and labor. It takes less than 20 minutes to install by yourself.

Scritto da: ThatGuy !

Great Price, Quality !

This is a quality product. Make sure you measure your spring. Also remember the right side spring looking at the door from the inside is LEFT and the left side is RIGHT. Also buy the winding rods. If you have only one spring no unwinding. If you have two use the rods (and only use the RODS to unwind). Mark both cable pulleys to shaft. Then loosen the pulley set screws. Unhook cable from both and hang on door. Mark center bracket that supports shaft for latter install. With only one spring, slide the pulley on the spring less side in away from the end bracket. The loosen the spring at the center and check the plastic bushing. There is only one, even if you have two springs. The loosen the hub side of the broken spring. (make sure there is no tension, this is the side you wind with the rods (ONLY THE RODS). slide the whole shaft away from the side with the spring to be able to remove the pulley on the spring side. Remove spring. Install new spring and reinstall the removed pulley. Wind cable on first pulley and align the marks (you placed earlier on pulley "both sides" and shaft. Tighten pulley with marks on shaft aligned. Take a vice grip and clamp shaft so cable now installed on pulley cannot unwind. Vice grip will be against wall. Do same on other side, wind cable on pulley and then align marks. Shaft will not move. Door is now balanced. Now attach spring to center bracket. Make sure bushing is in place. align shaft with mark on bracket from before. Once spring is tight we now move to winding side. Use winding rods, you can buy them on Amazon. (ONLY WINDING RODS). place one rod at a time and start to wind. One quarter turn at a time, placing one ROD then another. 30 quarter turns. Support rod on last turn and lock in spring, with both locking bolts/pins. Once this is done remove ROD and remove Vice Grip. check door.

Scritto da: Vyndictive

Nice quality replacement door spring.

I bought these as they were the closest match to the springs that broke on my residential torsion spring garage door. My door is an insulated aluminum 4 panel door, 7' tall and 2 cars wide. I did buy the left hand wind spring to compliment this one because I did want to replace them in pairs. So, the spring itself was properly marked, it did have the indicator paint, and set screws. It had instructions taped to the spring with a table indicating how much lift each color could have, but fat load of good that does when clearly the spring has already arrived. It does not include any winding bars. So, installed these on 6/15/15 - they're stronger springs than I had before, so they required a bit less winding. The construction looks good and safe. I didn't notice any issues with the springs themselves upon installation. Some fiddling around, and I was able to repair my garage myself and get each spring set so it raises and lowers just fine. Now, these are prime - but it did take 4 days to reach me. That was 4 doors of not having my garage door work which very much upset me. Amazon gave me a $5 refund on the order, so $0.05 per hour that I couldn't use my garage. Thanks. . . But you can't fault the product for that. So, 4/5 stars right now because its too soon to say how durable they are. I would say 5, but because while it would be easy to include winding rods, they choose not to. Knowing they're selling through amazon which can be sold directly to the end user also. Maybe make it an option like sizing or something.

Scritto da: matt k.

Excellent product, saved me hundreds of dollars on the repair!

I had the springs break on my garage door after 12 years which I understand is about normal. I called a repair shop and was shocked to hear they wanted to charge me over $300 to repair the double-wide garage door. So I shopped at the typical lowes and home depot for replacement springs and the replacement springs were very expensive. Thought I would just check on amazon and sure enough, they carried the same springs at about half the cost of the hardware stores... So I decided to take on the project myself and am pleased to report that it went very smoothly. I did do my homework and watched youtube videos that walk you thru the DIY project. Obviously, the springs are under a lot of pressure and someone could get seriously injured if you don't follow instructions to the letter so if you are not confident in your ability to follow instructions to the letter... better pay the money and let an expert do it. Having said that, I was careful and followed the instructions on youtube carefully and got the springs changed out with no issues. It took me about 2 hours but that was mostly because I was going very slowly and carefully since I had never done it before. If I ever have to do it again, I think it is about an hour project. The new springs work great and the garage door opener works great. I saved myself a bundle by using amazon and doing it myself. I won't say it is a simple job but certainly within reach of someone who has basic mechanical skills AND is willing to do their homework and follow instructions exactly.

Scritto da: paula eperesi

Works like new!

A little scary to install. But works well. My husband is so handy!!

Scritto da: Felipe rivera

The price and the fitment

Easy to install

Scritto da: Thang Nguyen

Amazon

Good

Scritto da: victor roy

Good spring

Work good like the original,thank you

Scritto da: Nick

Bought to replace broken one

It was easy to install. Just a little trial and error to get balanced on the door

Scritto da: Tech By Trade

Quality product at a reasonable price.

First off. Confidence, Competent, Careful. Do not attempt this job unless you have all 3. You can severely injure or kill yourself doing this job. I upgraded from 28x2x.240 to these heavier springs. Install was an hour. I lost half a turn but the door is balanced like butter. I can lift it with my baby finger and it stays put. The door opener has an easy life. I got 7 years from the smaller springs. Hoping for 10 min from these .

Scritto da: Pascale

Worked great!

Worked great on my garage door. I would have liked to have more instruction on how to install it, but if you know what you are doing, this is definitely a good buy!