Rain Bird TC/1PKS pilienveida apūdeņošanas cauruļu griezējs, griež visu izmēru pilienveida caurules līdz 3/4 collu kombinētajām caurulēm — 1/4 un 1/2

Name: Rain Bird TC/1PKS pilienveida apūdeņošanas cauruļu griezējs, griež visu izmēru pilienveida caurules līdz 3/4 collu kombinētajām caurulēm — 1/4 un 1/2
Brand: Rain Bird
SKU: 0077985002374
Price: 45.71 EUR
Availability: InStock

Brand:Rain Bird

3.4/5

€
45.71

PRODUKTA APRAKSTS Rain Bird TC/1PKS pilienveida apūdeņošanas cauruļu griezējs, griež visu izmēru pilienveida caurules līdz 3/4”. Šis augstas kvalitātes cauruļu griezējs viegli griež visu izmēru pilināmās caurules, lai apmierinātu jūsu sprinkleru un apūdeņošanas sistēmas unikālās vajadzības. Nodrošina tīrus griezumus bez robainām malām vai cauruļu saspiešanas. Ass nerūsējošā tērauda asmens ātri un tīri griež ātrākai uzstādīšanai. Unikālais dizains nodrošina divas dažāda izmēra akas (viena 1/2 līdz 3/4 caurulei un viena 1/4 caurulei), nodrošinot lielāku sviru, tāpēc ir nepieciešams mazāks spēks, lai grieztu jebkuru cauruli! Viegla, bet izturīga konstrukcija. Ergonomiskais rokturis darbojas arī kā tranšeju rakšanas instruments, lai ieraktu caurules mulčā vai irdenā augsnē. Lieliski piemērots LPDE cauruļu, vinila cauruļu, pilienveida apūdeņošanas cauruļu, mērcēšanas šļūteņu, caurspīdīgu vinila cauruļu (CVT) un citu mīkstu cauruļu griešanai ar ārējo diametru līdz 0,750 collām. Labi pamanāmā purpursarkanā krāsa ļauj instrumentu viegli pamanīt zālē, augsnē, mizā utt. Ērtā plastmasas maisiņā ir (1) cauruļu griezējs. Rezerves asmeni var iegādāties atsevišķi: PPC-200XBLD. Rain Bird “Ūdens saprātīga izmantošana” NO RAŽOTĀJA Rain Bird Corporation ir privāts uzņēmums, kas dibināts 1933. gadā Kalifornijas lauksaimniecības uzplaukuma laikā. Mēs esam atzīti par vadošo apūdeņošanas produktu un pakalpojumu ražotāju un pakalpojumu sniedzēju pasaulē. Ar tirdzniecības birojiem visā pasaulē; mēs piedāvājam vairāk nekā 4000 ūdeni taupošu apūdeņošanas produktu vairāk nekā 130 valstīs. Kopš pašiem pirmsākumiem Rain Bird ir ražojis un piedāvājis nozarē visplašāko augstas kvalitātes apūdeņošanas produktu klāstu: fermām, golfa laukumiem, sporta arēnām, komerciāliem objektiem un mājām. Pēdējo 80 gadu laikā Rain Bird ir saņēmis vairāk nekā 450 patentu visā pasaulē. Ieskaitot pirmo apūdeņošanai 1935. gadā mūsu oriģinālajam triecienpiedziņas smidzinātājam (ASV patents Nr. 1 997 901), kas radīja revolūciju lauksaimniecības pārtikas ražošanā un ievadīja jaunu ēru apūdeņošanā visā pasaulē. 1990. gadā Amerikas Lauksaimniecības inženieru biedrība šo oriģinālo trieciensmidzinātāju atzina par vēsturisku orientieri. Mūsu produkti aptver visus apūdeņošanas aspektus… taimerus/kontrolierus, uznirstošos rotācijas smidzinātājus, uznirstošos smidzināšanas galviņas smidzinātājus, sprinkleru sprauslas, apūdeņošanas vārstus, pilienveida apūdeņošanu, drenāžu un daudz ko citu. Visi šie produkti ir izvēlēti un uzstādīti visā pasaulē lielākajos un prestižākajos dzīvojamo, komerciālo, lauksaimniecības un golfa laukumu apūdeņošanas projektos. Rain Bird ir apņēmies īstenot The Intelligent Use of Water™, un mūsu apņemšanās aptver ne tikai produktus, bet arī izglītību, apmācību un pakalpojumus nozarei un sabiedrībai. Mūsu mantojums ir izstrādāt un ražot tikai augstākās vērtības un kvalitātes produktus. Mēs esam pateicīgi, ka esam saņēmuši daudzas atzinības balvas no daudziem mūsu vērtīgajiem partneriem. Lietus putns “Saprātīga ūdens izmantošana

Summa

Pievienot grozam Pērc tagad

EAN: 0077985002374

Kategorijas Dzīvoklis, zāliens un dārzs, dārzkopība un zāliena kopšana, Laistīšanas aprīkojums, Automātiskās apūdeņošanas iekārtas, Uzūdeņošanas caurules,

Izmantojiet ātrai uzstādīšanai. Ergonomisks rokturis. Nogriež pilienu caurules. Nerūsējošā tērauda asmens. Ļoti pamanāma purpursarkanā krāsa ļauj instrumentu viegli pamanīt zālē, augsnē, mizā, mulčā utt. Nodrošina ātrāku un vienkāršāku pilināšanas sistēmas uzstādīšanu. Ir padziļinātas akas, kurām nepieciešams mazāks sviras efekts un spēks. Ass nerūsējošā tērauda asmens un ergonomisks rokturis. Darbojas ar visu zīmolu 1/4 līdz 3/4 pilienveida apūdeņošanas caurulēm. Augstas kvalitātes viegls griešanas instruments; veic tīrus griezumus bez robainām malām vai cauruļu saspiešanas.

Country of Origin	Canada
Customer Reviews	4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	TC/1PKS
Item Weight	1.6 ounces
Manufacturer	Rain Bird
Product Dimensions	20.5 x 20.5 x 4.25 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Sandra

made my job easier

it made my job easier

Scritto da: Angel Douglas

Very small so dont lose it, worked good for what It was needed for

I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.

Scritto da: JS

Slow shipping.

Works great

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Flamsteed

I needed his

I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.

Scritto da: JNK

Blade works great, hole punch not so much

The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.

Scritto da: Saeng Fio Chao

Great handy tool

With all others tool, I find this is the best one

Scritto da: Ed

Don't forget the tool!

I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.

Scritto da: Annette Dreger

Very easy to use

Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!

Scritto da: Amazon Customer

retour imposible

J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item

Scritto da: DP Kindle Customer

It works!!

Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!

Scritto da: rferraro

Product description is misleading

I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....