Rūpnieciskās testēšanas sistēmas SenSafe 481026 bez hlora teststrēmeles

Brand:Industrial Test Systems

3.1/5

47.93

SenSafe Free Chlorine Water Check teststrēmeles ir VIENĪGĀS EPA AKCEPTĒTĀS (publicētas 2007. gada Federālajā reģistrā (72. sējums, Nr. 47, pirmdiena, 2007. gada 12. marts, 11204. lpp., ITS metode D99-003)) testa strēmeles, ko izmanto dzeramā ūdens atbilstībai. uzraudzību. Tie apvieno plašu ūdens kvalitātes noteikšanas klāstu ar mūsu patentēto brīvā hlora indikatoru. Free Chlorine Water Check ir izstrādāts, lai izturētu monohloramīnu radītos traucējumus, un tas ir ideāls produkts, pārbaudot dzeramā ūdens kvalitāti. SenSafe bezmaksas hlora ūdens pārbaude ir lieliski piemērota, lai noteiktu, vai jums ir pareizs dezinfekcijas līdzekļa daudzums. Turklāt, lai veiktu ūdens kvalitātes pārbaudi, nav nepieciešamas nekādas ārējas ķīmiskas vielas, tāpēc testēšana ir ātra, vienkārša un pieņemama.

✅ RAŽOTS ASV KVALITĀTE: ITS ražo teststrēmeles savā ASV ražotnē vidē, kas nodrošina reproducējamību, precizitāti un izsekojamību, pamatojoties uz labu ražošanas praksi. Sastāvdaļas katrā posmā pārbauda kvalitātes kontroles personāls, un tās tiek noraidītas, ja tās neatbilst specifikācijām. ✅ PILNĪGS KOMPLEKTS: pudele ar 50 testa strēmelēm ar pārbaudītu krāsu diagrammas pudeles etiķeti, lai atvieglotu krāsu saskaņošanu. ✅ USEPA ACCEPTED bezmaksas hlora teststrēmeles dzeramā ūdens ziņošanas nolūkiem, kas jāizmanto pēc katras valsts ieskatiem (ITS metode D99-003, kas publicēta Federālajā reģistrā). ✅ VIEGLA LIETOŠANA: vienas iegremdēšanas un nolasīšanas teststrēmeles procedūra un optimizēta krāsu diagramma padara produktu par ideālu gan tehniskiem, gan netehniskiem lietotājiem, lai noteiktu zemu brīvā hlora saturu ūdenī — ideāli piemērots dzeramajam ūdenim, ēdināšanas pakalpojumiem, restorāniem un citiem. dzeramais ūdens. ✅ NOTEIKŠANAS LĪMEŅI: brīvais hlors 0,0, 0,05, 0,1, 0,2 0,4, 0,6, 0,8, 1,2, 1,5, 2,0, 2,6, 4,0,> 6,0 ppm (mg/l), nav paredzēts lietošanai hlora, neatšķaidītā hlora vai neatšķaidītā šķīdumā jebkuri citi hloru nesaturoši šķīdumi. Nereaģē ar kombinēto hloru (hloramīniem), ko izmanto dažās ūdens sistēmās.
Country of Origin USA
Item model number 481026-BU
Manufacturer Industrial Test Systems, Inc.
Product Dimensions 1.5 x 1.5 x 3.25 inches; 1 Ounces

3.1

8 Review
5 Star
58
4 Star
17
3 Star
8
2 Star
4
1 Star
14

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Savage designs
Better than some of the other test strips. But.
I have tested 3 different brands of test strips over a 7 day period and they did not correlate at all. 0.2 to 4.0 That is a huge difference when you are drinking the stuff. If you simply need to check if you have chlorine in your water these will work. If you need a definitive number go with a Taylor chlorine kit instead. For reference: I check my drinking water tanks for free chlorine every morning. When it gets below 0.2, I add 2.5 teaspoons of (drinking water approved) chlorine granules to a 2500 gallon tank. For our water usage, it will last a week before I need to chlorinate the tank again.
Scritto da: mark Romain
Accurate tests every time
Just follow the easy instructions and you will get results. The kit inspires customer confidence.
Scritto da: Jmmy
Great
Easy to use.
Scritto da: Shelby
Lots of duds
I went through 8 of these before getting one that worked. For what it's worth, the ones that did work were accurate.
Scritto da: Roberto
Easy to use and read
Easy test.
Scritto da: Scott
Totally Inaccurate Results
Purchased August 2022 to measure monthly Free Chlorine (TRC) from new septic system install for County Health Department. Always measured zero Free Chlorine, well below minimum required. Spent months with equipment manufacturer and installation contractor trouble-shooting system. Tried several types of chlorine tablets, etc. Finally had independent lab test and free chlorine was 0.99 mg/L. This test kit was defective! And could not return for refund because past the return date.
Scritto da: Todd Humphrey
Very poor accuracy, not trustworthy
I have done at least a dozen test very explicitly following the directions and the results are nowhere near compared to two other test. One test I’m using is liquid with the drops, another is a test strip that you dip. Both of those are indicating over 5 ppm this test is consistently giving .6 to 1.2 ppm. Both my other tests are highly rated for accuracy. They just are not easy to read anything under 2 ppm which is what I’m trying to achieve for my hot tub. I bought two bottles I will be returning one.
Scritto da: Stephen Hill
0 Results For My Tap Water...... Read the Product Discription Carefully
There was a 0 concentration as measured with my tap water.....but I know that my city uses Chlorine / Chloramines per information from my Orange County Calif water department. After reading more carefully the product description..."Does not react with combined chlorine (Chloramines)" Maybe I have Chloramines in my water supply?

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array