SharkBite 1/2 collas gofrēta tēja, iepakojumā 10, misiņa santehnikas veidgabals, PEX caurule, PE-RT, UC362LFA10

Brand:SharkBite

3.8/5

54.13

SPEKTI: SharkBite misiņa veidgabalu minimālā darba temperatūra ir 33 grādi F pie 160 PSI un maksimālā darba temperatūra 200 grādi F pie 80 PSI. ATTIECĪBĀ UZ PROFI: SharkBite instrumenti un piederumi atbilst tiem pašiem augstiem standartiem komerciāliem un dzīvojamiem santehnikas lietojumiem, apvienojot izturību un lietošanas ērtumu; sertificēts izmantošanai dzeramā ūdens un hidrauliskās apkures sistēmās. IZTURĪGI UN AUGSTA KVALITĀTE: Šie gofrēti T-savienotāji ir izgatavoti no bezsvinu DZR misiņa, lai nodrošinātu ilgstošu uzticamību; bez korozijas un bez katlakmens veidošanās. SAVIETOJAMĪBA: Misiņa gofrētās tējas labi darbojas ar PEX un PE-RT caurulēm. SHARKBITE BRASS CRIMP TEE: Šis SharkBite misiņa gofrētais tee savienojums ir pilnas plūsmas veidgabals, ko izmanto, lai izveidotu savienojumu starp divām vienāda izmēra PEX caurulēm, izmantojot vara gofrēšanas gredzenus vai nerūsējošā tērauda skavas.

SPEKTI: SharkBite misiņa veidgabalu minimālā darba temperatūra ir 33 grādi F pie 160 PSI un maksimālā darba temperatūra 200 grādi F pie 80 PSI. ATTIECĪBĀ UZ PROFI: SharkBite instrumenti un piederumi atbilst tiem pašiem augstiem standartiem komerciāliem un dzīvojamiem santehnikas lietojumiem, apvienojot izturību un lietošanas ērtumu; sertificēts izmantošanai dzeramā ūdens un hidrauliskās apkures sistēmās. IZTURĪGI UN AUGSTA KVALITĀTE: Šie gofrēti T-savienotāji ir izgatavoti no bezsvinu DZR misiņa, lai nodrošinātu ilgstošu uzticamību; bez korozijas un bez katlakmens veidošanās. SAVIETOJAMĪBA: Misiņa gofrētās tējas labi darbojas ar PEX un PE-RT caurulēm. SHARKBITE BRASS CRIMP TEE: Šis SharkBite misiņa gofrētais tee savienojums ir pilnas plūsmas veidgabals, ko izmanto, lai izveidotu savienojumu starp divām vienāda izmēra PEX caurulēm, izmantojot vara gofrēšanas gredzenus vai nerūsējošā tērauda skavas.
Brand SharkBite
Color Brass
Connector Type Tee
Exterior Finish Brass
Item Dimensions LxWxH 0.56 x 4.88 x 8 inches
Item Weight 0.05 Pounds
Material Made from premium lead-free DZR EcoBrass.
Number Of Pieces 10
Size 1
Thread Type DZR

3.8

13 Review
5 Star
86
4 Star
9
3 Star
3
2 Star
1
1 Star
1

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Copper
It's definetly a half inch pex tee
It is what it says it is, a brass half inch tee fitting. holds well and doesn't leak. I'm not sure what else you want to know about when reading a review on a plumbing connector. I used it to add hot and cold water lines for a bidet, so far it's worked fine without any problems.
Scritto da: Gail Holleron
Seals tight
Worked perfect. Tubing slid on with ease and sealed tight.
Scritto da: Ray White
Know what you are doing! Not like me!
I guess you better know what you are doing with this tee. Mine leaked. So I guess I didn't know what I was doing. The attached pic shows my application. I still don't know why it leaked. Everything looked good to me. I used a good SharkBite clamp, and the proper tool. The plastic pipe clamped down real nice on the tee barbs. It was very tight. It looked perfect to me. It still does. But... it leaked. So, I switched to SharkBite U362LFA tee connector instead. That worked fine. No leaks.
Scritto da: gweedo
works great
if you got a big job best go with the pack of ten used the tee and elbows no issues
Scritto da: Glocktard
shark bite quality.
brand name and at a great price compared to the big box store. i tested one of these and a shark bite ring clamp using a Iwiss clamp tool and it passed the no go test. the wife even crimped it and said that was easy! i wanted to have this as an emergency parts kit in case i get a water leak because our house is completely Pex.
Scritto da: ray phillips
if your are mechanical inclined these are easy to use
good product for diy projects but are a little to expensive
Scritto da: Ra
This worked fine but I went with the Sharkbite fitting for my 3rd faucet.
This tee worked fine. I used the clamp system, as opposed to the crimp system. I did not buy the special tool, I made it work with standard tools. I decided to add a 3rd hose bib and I decided to try the same Sharkbite fitting that all my faucets have. No clamps needed. Just insert the pipe very firmly. https://amzn.to/2BRdQkL . The end of the pipe must be cut precisely flush for this to work properly. I like it.
Scritto da: Amazon Customer
works fine easy install
works well
Scritto da: Sam
Too small without clamps
I was upset to realize these are not meant to be tight with just the barbs. Luckily a tight wrapping of electrical-tape widened it enough to use as I intended.
Scritto da: Amazon Customer
Did the job
Did the job
Scritto da: Gerard F. Pilon
ok
good price from the outlet store
Scritto da: isaak bergen
I love it
Good stuff
Scritto da: Amazon Customer
Works good
Works good

Saistītie produkti

hot
Emberglo 523618 Flame Rod Midco
4/5

€ 65.53

Emberglo 523618 Flame Rod Midco
4/5

€ 65.53

hot
NIBCO 5817 2 rumbas vāciņš ABS DWV
4.1/5

€ 31.52

NIBCO 5817 2 rumbas vāciņš ABS DWV
4.1/5

€ 31.52

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array