SP Ableware Cane Valet Cane Holder (703240050)

Name: SP Ableware Cane Valet Cane Holder (703240050)
Brand: SP Ableware
SKU: 0742645010715
Price: 41.86 EUR
Availability: InStock

Brand:SP Ableware

1.5/5

€
41.86

Šis spieķa turētājs tiek izmantots spieķa pakarināšanai vai ieķīlēšanai, un tas ir mazs plastmasas stiprinājums, kas tiek piestiprināts pie spieķa, lai noturētu to uz galda malas, kad to neizmanto. Turētājs tiek piestiprināts pie spieķa un slīd uz augšu vai uz leju, lai saskartos ar galda augšējo vai apakšējo daļu, un tas ir daudzpusīgs lietošanai pa pāriem, lai saskartos gan ar galda virsmu, gan apakšu. Ap gala āķiem var novietot nelielu gumijas joslu, lai saglabātu labāku saķeri ar spieķa kātu. Turētāja izmēri ir 8,5 x 4,0 x 1,0 collas (G. x. P. x A). (L ir garums, horizontālais attālums no kreisās puses uz labo; W ir platums, horizontālais attālums no priekšpuses uz aizmuguri; H ir augstums, vertikālais attālums no zemākā līdz augstākajam punktam.) Ableware specializējas mājas veselības aprūpes un rehabilitācijas produktos senioru, invaliditātes un rehabilitācijas tirgi. Mēs esam atzīti par lielāko Amerikas Savienoto Valstu ikdienas dzīves palīglīdzekļu (ADL) ražotāju. Uzņēmums Ableware turpina izstrādāt un ražot produktus, kas palielina mobilitāti, palielina neatkarību un ļauj cilvēkiem dzīvot atalgojošāku, cienīgāku un bagātāku dzīvi.

Summa

Pievienot grozam Pērc tagad

EAN: 0742645010715

Kategorijas Medicīniskais aprīkojums un iekārtas, Dzīves un ikdienas dzīves palīglīdzekļi, Izturības palīglīdzekļi un aprīkojums, kāju, kruķi un piederumi, Kultas piederumi, Trīsīšu turētāji,

Universāls lietošanai pa pāriem, lai saskartos gan ar galda virsmu, gan apakšu. Piesprādzējas uz spieķa un slīd uz augšu vai uz leju, lai pieskartos galda augšdaļai vai apakšai. Mazs, plastmasas stiprinājums uzstādīšanai uz spieķa, lai noturētu to pie galda malas, kad to neizmanto. Ap gala āķiem var novietot nelielu gumijas joslu, lai saglabātu labāku saķeri ar spieķa kātu. Turētājs spieķa pakarināšanai vai ieķīlēšanai.

Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	703240050
Manufacturer	MADJI
Product Dimensions	2 x 2 x 0.75 inches; 0.8 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: D.J.

Spend Most Of Your Time Worrying About It Falling

'Barely' worked. Surprisingly (to me anyway), every table/desk I tested this on had a beveled edge. This product does not do well with beveled edges because this product has to reach so far to get past the beveled part to get to the actual 'top' of the table that only a very small part of this product is actually touching the top of the table. So this makes the cane swing very far under the table, which means the cane is at about a 45 degree angle, which means that this product is at about a 45 degree angle and therefore VERY close to slipping off the table. My dad and I had to place it absolutely perfectly on the table so there would be no swinging at all when we let go, otherwise it would slide off. And even when it didn't slide off, it sure acted like it was ready to slide off at any minute. The material wasn't a grippy, rubber type material like would be expected either. It was actually fairly smooth (which increases slipperiness). This was very surprising. There were two of these slats included in the package and they suggested trying one slat above the table and one below, that was supposed to hold it a bit tighter by kind of gripping the table. Well two problems with that... 1) Different tables have different thicknesses so you'd have to adjust one of the slats when you sit at different tables, and 2) When I tried this, it didn't help. If the slats were a bit longer, or they put rubber grippers under the slats, or it was made out of a rubber-like material, it'd probably work better. But my experience was that my dad would spend more time worrying about it falling on the floor than he would spend finding a place to prop his cane up in the first place. Can not recommend it.

Scritto da: DK

There are two in the package.

I bought two because the description says "The holder" (singular) and the reviews say you need a pair. There are two in the package so now I am stuck with an extra pair. I will update the review after I see how they work.

Scritto da: BettyL

Tabling your Cane

This product works fairly well; however, you really need TWO! You leave space between the two--as shown on the product page; this clamps between the top and bottom layer of a table & is adjustable as to thickness.

Scritto da: Carl Franklin, JD/PhD

Good for those who use a cane or walking stick.

Works just like the advertisement. I tried using a single rubber piece, and it worked okay most of the time. With two in place you get a lot better grip. I also use an aluminum walking stick that I purchased years ago when I would go hiking a lot. This piece has actually been very helpful for me on a hiking trail. I can put the walking stick on a nearby tree branch of other "flat" surface to keep from laying my instrument on the ground.

Scritto da: Brumby Mcgehee

Doesn't work

One half of it will often hold a cane on a counter if the flat side of it is down.

Scritto da: Steven Fuller

This is a terrible product it fell of the cane with in the ...

This is a terrible product it fell of the cane with in the first hour of use and was lost due to breaking

Scritto da: Bernie Saunders

The Cane Valet/Cane holder is a great thing. When you slide it on to the ...

The Cane Valet/Cane holder is a great thing. When you slide it on to the table it stay there or at a counter it will stay there, etc. Thank you.

Scritto da: AlliFlowers

Does not work

Does not work. Too short to put around a table and actually hold the cane immobile.