VEVOR Rolling Garāžas krēsls, ietilpība 300 LBS, regulējams augstums no 15,7 collas līdz 20,5 collām, mehāniķa sēdeklis ar 360 grādos grozāmiem riteņiem un instrumentu paliktni, darbnīcai, auto remontdarbnīcai, melns

Name: VEVOR Rolling Garāžas krēsls, ietilpība 300 LBS, regulējams augstums no 15,7 collas līdz 20,5 collām, mehāniķa sēdeklis ar 360 grādos grozāmiem riteņiem un instrumentu paliktni, darbnīcai, auto remontdarbnīcai, melns
Brand: VEVOR
SKU: 0840281501083
Price: 179.58 EUR
Availability: InStock

Brand:VEVOR

2.5/5

€
179.58

Ritošais garāžas krēsls Izturīgs sēdeklis un glabāšanas paplāte un 3 ritentiņi Mūsu ritošais garāžas krēsls ir izturīgs un uzticams. 300 LBS liela ietilpība un 16 sēdvietas ļauj ērti strādāt garāžā vai darbnīcā. Pneimatiskais sēdeklis projektiem var noregulēt ideālo augstumu no 15,7 collas/40 cm līdz 20,5 collas/52 cm. Galvenie līdzekļi Labi uzbūvēts sēdeklis Šis ritošais krēsls ir lieliski piemērots darbiem, kuru veikšanai nepieciešamas stundas. Rāmis ir izgatavots no tērauda, un tam vajadzētu izturēt 300 mārciņas smagumu, tādējādi padarot vairāk darba un strādājot ērti. Regulējams augstums Pateicoties pneimatiskā cilindra konstrukcijai, garāžas krēsla augstumu var viegli noregulēt no 15,7 līdz 20,5 no zemes. Maksimālais 20,5 augstums ļauj izmantot šo krēslu ar rakstāmgaldu.Riteņi un bremzesLielajā uzglabāšanas paplātē ērti var uzglabāt tādus rīkus kā skrūvgriezis, mikrošķiedras dvieļi, sūkļi utt. lieli 3 diametra riteņi mīksti un gludi ripo pa grīdu. Diviem ritentiņiem ir bremzes, tāpēc sēdeklis tiek bloķēts, veicot apstrādi uz slīpa piebraucamā ceļa. Ērts ilgākām stundāmŠis garāžas sēdeklis ir laba izvēle komforta ziņā, jo īpaši atzveltne, kas ļauj noliekties. Tas ir stabils, un tā lielā pamatne neļauj tas nevar apgāzties.Plašs pielietojums Ērts sēdeklis ievērojami atšķirsies no tupēšanas, it īpaši, ja jums ir jāstrādā ilgas stundas. Šis ritošais garāžas ķeblītis ir parocīgs palīgs, kuru esat trūcis savā veikalā. SpecifikācijasModelis: VVCCGLJH4LCKapacitāte: 300 mārciņas/135 kg Pacelšanas diapazons: 4,7 collas/12 cmMin. Augstums: 15,7 collas/40 cmMaks. Augstums: 20,5 collas/52 cm Ritentiņa diametrs: 3 collas/7,6 cm Ritentiņu skaits: 4 gab. Svars: 16,5 mārciņas/7,5 kg Spilvena izmērs (P x G): 16,1 collas x 12,2 collas/41 cm x 31 cm Izmērs (G x P x A) : 16 x 16 x 26,8 collas/41 x 41 cm x 68 cm Paplātes izmērs: 15,4 collas/39 cm Iepakojuma saturs 1 x Ritošā darba krēsls

Nav pieejama neviena vienība

EAN: 0840281501083

Kategorijas Automobiļu nozare, instrumenti un aprīkojums, Garāžas un darbnīcas, Rolleru sēdekļi un kāpšļi, Krīpji,

Sēdieties: Ritošais sēdekļa krēsls ir veidots tā, lai tas būtu izturīgs. Rāmis ir izgatavots no tērauda un sēdeklis ir izgatavots no augsta blīvuma polietilēna. Tas bez problēmām izturēs 300 mārciņas. Tātad, ja jums nepieciešama ērta un izturīga sēdvieta jūsu remontdarbnīcai, garāžai, mājai, varat meklēt šo. Izturīgi ritentiņi un bremzes: šim ritošajam garāžas sēdeklim ir 4 grozāmie ritentiņi, kuru diametrs ir 3. Šie PVC ritentiņi kopā ar gludo vinilu un 2 ritentiņiem, kas aprīkoti ar bremžu mehānismu, ir diezgan droši, strādājot uz slīpa piebraucamā ceļa. Uzglabājiet un sakārtojiet savu komplektu: mūsu ritošajam krēslam ir savdabīgs dizains, kas ir atrisinājis uzglabāšanas problēmu. Izmantojot lielo tērauda instrumentu paplāti, jūs varat sakārtot savu aprīkojumu un turēt to sasniedzamā attālumā. Ievietojiet glabāšanas nodalījumu kāju balstā!. 15,7–20,5 augstuma diapazons: jūs varat ātri pielāgot ķebļa augstumu, izmantojot automātiskās pacelšanas sviru, no 15,7 collas/40 cm līdz 20,5 collas/52 cm. Regulējamā augstuma dizains var pielāgoties dažādiem lietotājiem un dažādiem projektiem. Neatkarīgi no tā, vai vēlaties noslaucīt automašīnas augšējo daļu vai apakšējās riepas, varat noregulēt sēdekļa augstumu, lai samazinātu slodzi uz muguru un ceļiem. 300 LBS Rolling Garage Stool: Ja pavadāt daudz laika, sēžot garāžā vai veikalā, noteikti ir vērts ieguldīt ergonomiskā slīdošā veikala krēslā. Garāžas izkārnījumi būtu lieliski piemēroti jebkuriem projektiem, kuriem jums ir jāpieliekas. Jūs varat sēdēt un strādāt, nevis tupēt. Šī 300 mārciņu ietilpība ļauj pieaugušajam droši apsēsties. Ārējos darbus varat pabeigt daudz vienkāršāk.

Assembly Required	‎Yes
Brand	VEVOR
Brand	‎VEVOR
Color	Black
Color	‎Black
Country of Origin	‎China
Customer Reviews	3.5 3.5 out of 5 stars 192 ratings 3.5 out of 5 stars
Frame Material	Alloy Steel
Frame Material	‎Alloy Steel
Furniture Finish	‎Glossy
Item model number	‎300lbs Stool with Tray
Item Weight	‎16.5 pounds
Item Weight	‎7.5 Kilograms
Leg Style	‎Fluted
Manufacturer	‎VEVOR
Manufacturer Part Number	‎Swivel Wheels Stool
Maximum Weight Recommendation	‎300 Pounds
Model	‎Adjustable Height Seat
Number of Pieces	‎2, 4
Product Dimensions	40"D x 30"W x 30"H
Product Dimensions	‎40 x 30 x 30 inches
Product Dimensions	‎40"D x 30"W x 30"H
Seat Material Type	Fabric
Seat Material Type	‎Fabric
Shape	‎L-Shaped
Size	‎41 cm x 41 cm x 68 cm
Style	‎Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Fox996

Mostly great stools but the casters designed wrong

Overall these are decent shop stools for the money and I'd buy them again if I need more. That said, I bought two of these and each had a challenge with some of the parts (appears to be an issue with the manufacturer quality control process). The first had a standard hex nut for the casters and it screwed down okay but with the way the bottom of the foot is designed, there's really no way to tighten it down without adding some washers on the top and bottom so the hex doesn't have a big gap between. The second stool came with cap/dome nuts instead of hex nuts for the casters so it's not even close to tight (pic included). If I use them as-is, the angle of the caster is going to break the weld on the bottom like some of the other reviews show. I’m not going to bother sending them back just due to that so I'm using them without casters until I have time to run by the hardware store and grab some other parts to make them work. A better design would be to either have the hex nut for the caster welded to the inside of the foot so you can just screw it in with the little wrench it comes with OR to have a round hole on the bottom of the foot (the size of the caster bolt) so you can at least tighten the nut on the top properly.

Scritto da: DougM

Yes, but...

Of the four companies selling the same stool in various colors, this one promised up-dated casters to solve the frequently mentioned problems with the original ones. All was well except that one caster was quite difficult to mount as it had a mis-formed collar. I got it on. The stool seems sturdy and is stable.

Scritto da: Nicole Spencer

Poor Quality, NOT as Described

I think this is the first negative review I've ever had to leave. I ordered it for a surprise for my husband. I was so disappointed when I opened the box. The seat was CHEAP hollow plastic, not fabric as described, the casters were almost impossible to get installed. Now that's it is assembled, it's wobbly. Very poor quality. Unfortunately, returning isn't an option. It would be impossible to get it apart and fit back in the box. So if you are looking to buy this, and it's over $30-35 dollars- take a hard pass. Learn from my mistake.

Scritto da: Michael Fritz

DO NOT PURCHASE THIS ITEM!

I should have heeded the other reviews of this rolling stool. It looks to be well assembled, but the engineering of the caster wheels to the bottom of the legs is inexcusable bad. First of all, the thickness of the sheet metal where the caster wheels are supposed to attach is about 1/8" thick. Unfortunately, the height of the hex nut that inserts into the 1/8" piece is about 3/16" tall, which means that you can never tighten the locking nut tight enough to allow the caster to seat firmly against the end of the 1/8" metal leg. I happed to have a different set of casters in my tool chest, so using some washers I was able to attach the casters to the 1/8" plate, but as can be seen in the third image, the first time I sat on it and tried to roll around the garage floor, the 2 spot welds let go and the caster wheel folded to the inside rendering this product useless. I am extremely disappointed in Amazon for continuing to carry this terrible product, it is a complete waste of $100 and I will in the future pay closer attention to the reviews by others as if I had, I would have seen this was rolling stool was a problem and made a different purchase.

Scritto da: Yantimundi

compact for durability.

Purchased it last year, so far is being useful.

Scritto da: David

Good sturdy product

It is a good sturdy product I like that. Seat is hard plastic.

Scritto da: Eugene Hall

Rolling stool

I love this thing

Scritto da: jason

Plastic seat

Great stool just it’s a plastic seat not cushion

Scritto da: ronald whynot

my ajustable seat

the rolling cart stool came with no wheels and the nut for them was in a sandwich bag really man not happy

Scritto da: Fade

Terrible

The wheel hardware did not fit and was useless. I had to purchase new casters separately and modify the hardware to make things work. Although the item is sturdily built the hassle of the supplied hardware not fitting plus the extra cost means I would not recommend. I am using it but only cause I can fix things myself and, for me this was less headache then trying to return it.

Scritto da: ZRTman

I was very satisfied with a strong looking seat… FAIL!

I had purchased this seat six months ago, and very pleased with the robust looking seat. My son and I are both over 6 feet tall, so I wanted a seat that without out-perform most other seat and I was willing to pay for it. I thought this was the seat but today I have been sorely disappointed. Now I realize the wheels are attached with a very thin weld, and certainly not worthy of the advertised, weight limitations.

Scritto da: Amazon Customer

Shop stool

Easy to assemble. Disappointed in the seat. It’s pretty flat. Not very conforming.