MG Chemicals 1035-80ML Некоррозионный полупрозрачный однокомпонентный силиконовый клей-герметик RTV, тюбик 85 мл

Name: MG Chemicals 1035-80ML Некоррозионный полупрозрачный однокомпонентный силиконовый клей-герметик RTV, тюбик 85 мл
Brand: MG Chemicals
SKU: 0779008103531
Price: 52.94 EUR
Availability: InStock

Brand:MG Chemicals

3.1/5

€
52.94

Растекающаяся, некоррозионная, полупрозрачная паста. Отлично подходит для герметизации и приклеивания электронных компонентов к печатным платам и защиты медных соединений электронных компонентов в сборе. Отлично подходит в качестве герметика для защиты от атмосферных воздействий в местах, где шнуры питания входят в двигатели. Используйте в качестве прокладки для герметичного уплотнения и изоляции. Сохраняет эластомерные свойства в течение длительного времени при температурах от -60°C до 204°C (от -75°F до 399°F). Рекомендуется для морских применений. Отличается высокой прочностью, не подвержен коррозии. 1,04 удельный вес. 15 минут до отлипа. 12 - 24 часа лечения через время. Твердость 21 (по Шору А). Прочность на растяжение 1,896 МПа (275 фунтов на кв. дюйм). 500-процентное удлинение. Прочность на разрыв 7,1 кг/см (40 фунтов/дюйм). Прочность на отрыв 8 кг/см (47 фунтов/дюйм). Объемное удельное сопротивление 2 x 10(15) Ом·см. 16,8 кВ/мм, диэлектрическая прочность 425 В/мил. 2,8 при 100 Гц диэлектрической проницаемости. 0,06 Вт/м. К-градус теплопроводности. -60 градусов C (-75 градусов F) точка хрупкости. 3,0 x 10(-4) мм/мм/градус С. 480 г/мин Вязкость (при 25 градусах С). Отличная химическая стойкость. Модифицированный алкокси (нейтральный) отвердитель. Адгезия без грунтовки. Признание UL HB и файл UL № E36952. Соответствует RoHS.

Количество

добавить в корзину Купить сейчас

EAN: 0779008103531

Категории Industrial & Scientific, Адгезивы, Герметики и смазки, Силикон,

Рекомендуется для морских применений. Используйте в качестве прокладки для герметичного уплотнения и изоляции. Отлично подходит в качестве герметика для защиты от атмосферных воздействий в местах, где шнуры питания входят в двигатели. Отлично подходит для герметизации и приклеивания электронных компонентов к печатным платам и защиты медных соединений электронных компонентов в сборе. Растекающаяся, некоррозионная, полупрозрачная паста.

Brand	MG Chemicals
Color	Translucent
Compatible Material	Copper
Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Item Form	Liquid, Paste
Item model number	1035-80ML
Manufacturer	MG Chemicals
Material	Silicone
Product Dimensions	1.51 x 6.55 x 2.02 inches; 3.1 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: WILDBOT3D

Always great quality from MG Chem.

Works great. Deducting a star because it comes in a metal tube which will probably lead most of it drying up. I realize a plastic tube might not be an option for this stuff but it looks like it's in a plastic tube and that was part of the reason I bought it. I hate metal tubes. They always get a pin hole in them causing the contents to leak out or dry up.

Scritto da: prionbrain

Like it!

Worked great for sealing a phone I recently changed the screen on - but I haven't checked if it is waterproof ...I wish it had a smaller applicator, but either way it worked good! I used a heat gun at a low setting... I don't know if that works well or not- but the phone is closed and works!:)

Scritto da: Wm L

New unopened tube is hard as a rock.

Broke the seal on a new unopened tube and had to squeeze the bejesus out of it to get any silicone out of it. It feels like 80% of the contents are already cured inside the tube. Can't flatten the tube. Very old stock???

Scritto da: m98lee

I understand that ordinary RTV (the kind that smell like vinegar) can promote rust

I wanted a corrosion-free adhesive sealer around the nylon plugs I used to fill in holes left by a roof rack on my car. I understand that ordinary RTV (the kind that smell like vinegar) can promote rust. This has sealed and adhered well so far...

Scritto da: Eddy Hicks

Good stuff, scary warnings

Probably no more risky than other brands but this comes with incredibly serious health warnings. The one that really caught my eye was something to the effect of "don't remove contaminated clothing from the work area". I think I'll be using gloves with this ????

Scritto da: William Blake

Excellent product but needs applicator tip

Would have given product 5 stars but product needs an applicator tip especially when using around electronic components. Otherwise, product excells where applied and has very low odor.

Scritto da: Bill In Beaverton

No Nozzle, "Non-standard" Threads

This just arrived. I did not read the answers to the posted questions carefully enough. Not only does it not come with a conical cut-to-diameter nozzle, it has oversized "non-standard" threads on the top. You will not be able to use a screw-on nozzle left over from that conventional RTV silicone tube you bought at the hardware store. I would send it back, but Amazon would probably make me pay the shipping, since I can't truly say it is defective or not-as-advertised. Not worth it. Sadly there is no way to apply it where I want to use it without making a mess. For reference: The threads on the top are approximately .552 in. major diameter, 14 TPI; or 14 mm major diameter, 1.75 mm pitch. The metric pitch looks a bit closer to right. It is hard to tell. There are only about 4 turns of thread, and they are asymmetric, steeper on the tube side than on the end side. (14 TPI = 1.81 mm pitch.)

Scritto da: Hupperware

Awesome

Used on a printed circuit board (PCB) to secure solder joints and wires in a high torque application. Goes on easy and dries clear.

Scritto da: David Hicks

Safe for waterproofing/sealing electronics

Regular silicone sealant/caulking will corrode metals in components/circuits so this is essentially if you want to waterproof electronics. In my case I was sealing strip lights that we're going outside. Use in a well ventilated area and wear gloves - the MHDS makes this stuff sound pretty intense. Includes a screw on nozzle which can be removed/cleaned for reuse. Is fairly thick and difficult to squeeze out of the tube. Nozzle makes for easy precision application. Dries quickly (under an hour) and it flexible when dry. Doesn't deal well with mechanical abrasion (kind of crumbles off) and may not adhere well to some plastics but does perform well on stable/static applications.

Scritto da: Amazon Customer

Silicone works well for bonding various stuff together. I ...

Silicone works well for bonding various stuff together. I use this for iPad Glass repair. Keep in mind the shelf life of Silicone can be short as it has a tendency to cure inside the bottle if left long enough. So use it within a month or so. Don't buy it just to stock it, otherwise when you need it it may have cured already.

Scritto da: Jaylon