Mophorn gaisa kompresora motors, 3/4 ZS vienfāzes elektriskais maiņstrāvas motors 1725 apgr./min. Reversīvs 115 V 230 V 56 rāmja elektromotors gaisa kompresora vispārējam aprīkojumam 0,75 ZS

Name: Mophorn gaisa kompresora motors, 3/4 ZS vienfāzes elektriskais maiņstrāvas motors 1725 apgr./min. Reversīvs 115 V 230 V 56 rāmja elektromotors gaisa kompresora vispārējam aprīkojumam 0,75 ZS
Brand: Mophorn
SKU: 0700721050611
Price: 271.27 EUR
Availability: InStock

Brand:Mophorn

3.3/5

€
271.27

Vairāki pielietojumi: Mūsu 3/4 ZS elektromotori ir universāli un parasti tiek izmantoti rūpnieciskajā un lauksaimnieciskajā ražošanā, transportēšanā, komerciālajā un sadzīves tehnikā un citās jomās. Piemēram, ūdens sūkņu, lauksaimniecības tehnikas uc saskaņošana. Tērauda korpuss: elektromotors ir izgatavots no augstas kvalitātes tērauda. Izturīgi un uzticami materiāli var labi aizsargāt motoru. Gluds izskats un stabils rāmis. Ātrgaitas dzesēšanas ventilators: liels ventilators vienā galā atdzesē motoru stundu darbības laikā, pat putekļainā vai mitrā vidē. Samazināt enerģijas izmaksas vai pieskaitāmās izmaksas, samazināt darba temperatūru, palielināt tinumu kalpošanas laiku. Darba efektivitāte: Lieljaudas elektromotoram ar nominālo ātrumu 1800 RPM ir augsta darba efektivitāte. Darbojas ar 0,75 ZS. Vārpstas diametrs: 5/8 collas ar atslēgu, vārpstas garums: 1,875 collas. 1,5 zs elektromotors: kompakta un maza izmēra maiņstrāvas motora jauda 3/4 ZS, 56 zs rāmis un vienfāze. Blīvēts kondensatora korpuss un cauruļvadu kastes aizsargā visu vidi.

Nav pieejama neviena vienība

EAN: 0700721050611

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstalācijas, Elektromotori, Ventilatoru motori,

Brand	Mophorn
Country of Origin	China
Horsepower	0.75 hp
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	12.3 x 8.5 x 8 inches
Item model number	125
Manufacturer	Mophorn
Product Dimensions	12.3 x 8.5 x 8 inches; 19.96 Pounds
Speed	1725.00
Voltage	115 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Mathew

clear instructions, simple wiring

spins if you plug it in.

Scritto da: MAUI

replacement motor

my original exhaust fan motor started sounding stressed, then in just wouldn't spin, I found this, the specs were comparable, so I got it, somehow there was a mix up with shipping, but the seller was able to get another shipped fast, Im not too savvy when it comes to wiring, so i found a tube video and it helped out big time, however the motor did come with instructions, so the video plus booklet together helped me understand what I was doing, super fast start up compared to my old motor, sounds strong, hopfully it lasts longer than my original!

Scritto da: 110 Motorsports

Purchased as a replacement for Ingersol Rand T5 air compressor

This motor is quite a bit smaller and mounting plat is flatter than it appears. The T5 mount is elevated. I took a flat piece of metal and notched out the holes to mate up to the compressor mount. Welded to the bottom of this. So far it has worked but prepare to make adjustments. Time will tell how well it holds up so I would rate it as average option to ingersol rand?

Scritto da: Amazon Customer

Seems to be great so far.

I run my air compressors very hard for sandblasting, and I normally buy expensive motors and pumps. This one was much lower priced, so I was a little skeptical, but I’ve had it running about 2 months now, it doesn’t get many breaks, and it’s doing great. I’m actually going to buy another one now.

Scritto da: Cabin Crow

PERFECT REPLACEMENT FOR OLD CAST IRON CRAFTSMAN TABLE SAW 113.29903

The OEM Craftsman motor gave up the ghost in the most stupid fashion, the shaft bent from snugging up the drive belt. Humming began, then intermittent start. Then finally, no start. Hum. Hmm. Took the thing apart and saw the commutator rubbing on the armature or whatever the guts are called. This is the PERFECT FIT and at 1.5 HP, I also bought the steel pulley for 5/8 shaft. That pulley is found here on Amazon. It is steel, has two set screws, and it comes with the square key stock, not a real 'woodruff key' since those have a curved side. That pulley is perfect too for this motor. Exact mount. Perfect. You will need a power cord so buy a new one, 14 gauge triple with the grounded plug 'for tools'. Then you will need a cord clamp / sheath cable connector with the screws so you can mount the cord and anchor it through the knock-outs on the motor's connection box. You will also need two wire nuts and a terminal -- spade type -- for the ground. Get yourself a new belt too. My saw's replacement belt is a Gates PoweRated 6841 / Industry Number 4l410K (1/2" x 41") = 12.5 to 13 mm x 1040 mm THIS HAS EASY TO READ WIRING INSTRUCTIONS on a double-sided, card stock, color printed document with all the models of single and three phase motors. You will easily be able to wire for 120 VAC or 230 VAC. Just read and take your time. If you're an old goat, put on your glasses. Only been running it a few days and if anything comes up, an update to the review will be posted.

Scritto da: Mark G.

Watch Out buying Refurbished

This motor said cosmetic imperfections... it was missing the fan! It has a thermal overload, so for now, it seems to be working ok. I am using this in a band saw. It is more noisy than the one that it replaced.

Scritto da: Alex

Great customer service

I don’t think I have ever written a review on Amazon but I wanted to say thanks for the awesome customer support. I bought this motor for my DIY plastic shredder at my house and it worked great the first day or so. There was a problem with the thermal reset and the company has sent me out a new motor to replace it with minimum hassle and a very quick turn over time. I would not hesitate to order from this seller again. I’m sure the new motor will work well for what I needed it was a perfect fit for my gear worm reducer 56C frame size. Thank you

Scritto da: Terry

Good replacement for husky air compressor

Works good for husky 80 gallon 3 cylinder compressor