PC-Products PC-11 epoksīda līmes pasta, divdaļīga jūras kvalitātes, 1/2 mārciņas divās kārbās, pelēkbalta 80115 PC-11 1/2 lb

Name: PC-Products PC-11 epoksīda līmes pasta, divdaļīga jūras kvalitātes, 1/2 mārciņas divās kārbās, pelēkbalta 80115 PC-11 1/2 lb
Brand: PC Products
SKU: 0342192479265
Price: 41.40 EUR
Availability: InStock

Brand:PC Products

3.6/5

€
41.40

PRODUKTA APRAKSTS PC-11 tika izveidots kā īsts jūras epoksīds, ļaujot lietotājiem pielīmēt mitru, sausu un pilnībā iegremdētu pamatni. PC-11 formula nodrošina pagarinātu darba laiku lieliem un kritiskiem darbiem, kas ļauj lietotājam mainīt darbu vai veikt izmaiņas. PC-11 augsta slapja satvērēja vai saķere atvieglo darbu virs galvas un sānu sienām bez pilēšanas vai nosēšanās. PC-11 demonstrē izcilu ķīmisko izturību pret maigām skābēm, kodīgām vielām, mazgāšanas līdzekļiem, benzīnu, mazutu, sāli un saldūdeni. Aukstā vai vēsā temperatūrā pirms lietošanas novietojiet PC-11 konteinerus karstuma tuvumā. PC-11 sajaucas un izkliedējas vieglāk 80 °F, nevis 40 °F temperatūrā. Jebkura tīra gluda, plakana virsma ir lieliska virsma sajaukšanai un apstrādei. Neliels špakteles nazis vai elastīga mākslinieka lāpstiņa ir lieliski instrumenti PC-11 sajaukšanai un uzklāšanai. Denaturēts spirts ir lieliski piemērots PC-11 izlīdzināšanai. Pirms uzklāšanas virsmu notīrīšanai izmantojiet arī denaturētu spirtu. Izmantot ar: koku, metālu (visiem veidiem), stiklu, ķieģeļu, bloku, gumiju, betonu, akmeni, šīferi, stiklšķiedru, flīzēm un citiem jebkurā un visās kombinācijās; kā hermētiķis: eļļas, gāzes, ūdens tvertnes, pagraba plaisas, spiediena tvertnes un santehnikas noplūdes; kā pildviela: caurumi, lējumi, raksti, veidnes, tukšumi, metināšanas šuves un daudz kas cits. Darba laiks (70 grādi F): 30-40 minūtes. Sacietēšanas laiks bez līmēšanas: 90 minūtes. Servisa sacietēšana: 8-12 stundas. Maksimālā izārstēšanas ilgums: 7 dienas. Gardner triecienizturība: 140 collas/lb. Vadītspēja (elektriskā): nevadoša. Lielisks termiskais šoks. Pēc izārstēšanas nav toksisks. Siltuma diapazons: no -20 līdz 200 grādiem F. NO RAŽOTĀJA PC-produkti, kas svin 75 gadus “Fixing Your Things”, ar kvalitatīviem, uzticamiem remonta produktiem. Remonta risinājumi gandrīz visam, kam nepieciešams remonts vai ko varat salauzt. No betona līdz koka restaurācijai un lieljaudas pastāvīgajiem remontdarbiem mēs jums nodrošināsim. Jā; Mēs varam to salabot

Summa

Pievienot grozam Pērc tagad

EAN: 0342192479265

Kategorijas Industriālie un zinātniskie priekšmeti, Līmvielas, Blīves un smērvielas, Epoksi, Paklāju epoksīdsveķi Adhezīvi,

Izturas pret maigām skābēm, kodīgām vielām, mazgāšanas līdzekļiem, benzīnu, mazutu, kā arī saldūdeni un sālsūdeni. Augstas lipīguma pastu var izmantot vertikālos un virs galvas. Var izmantot iekštelpās un ārā, ar temperatūras diapazonu no 35 līdz 115 grādiem F un ekspluatācijas temperatūras diapazonu no -20 līdz +200 grādiem F. Saista daudzus materiālus, tostarp stiklšķiedru, betonu, daudzus metālus, stiklu, keramiku un gumiju . Divdaļīga jūras epoksīda līmes pasta savieno materiālus sausā, mitrā un zemūdens vidē.

Brand	PC Products
Color	Off White
Compatible Material	Fiberglass, Glass, Ceramic, Concrete, Metal
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Form	Paste
Item model number	80115
Manufacturer	Protective Coating Co.
Material	Paste
Product Dimensions	4.75 x 2 x 2 inches; 11.2 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Al

Waterproof

I used the PC-11 epoxy to repair a leaking bathroom sink. The overflow channel to the drain had a small crack. I applied the PC-11 and let it cure for 48 hours before I put everything back and tested it. It no longers leaks! Wish I would have known to use denatured alcohol to clean the scaper after I applied the epoxy.

Scritto da: Lori Lamb

Awesome!!

I am a crafter and always end up being the person people bring their problems to. They know I can fix it! Recently I was asked if there was anyway I could fix a shattered ashtray for a friend. It was a glazed pottery in 100 pieces! I glued together what I could decipher but ended up with holes in several areas and extra pieces that wouldn't fit anywhere! I looked and looked for something to use. I saw this on a YouTube video, ordered it and went to work. I completely molded pieces with this and sanded and shaped and came out with a beautiful ashtray. I did some re- designing but she loved it. It made her cry! She said it was no longer going to be an ashtray she was putting it on display. The second picture is from the bottom to show how nicely this product helped me fabricate the pieces! I shocked myself! Good stuff!!

Scritto da: Amanda Bartlett

Amazing

A staple in my studio

Scritto da: shane reil

Product is white

I did not read the description or its not in the listing that the product is off white. What I was using the product for it would not work but dried hard and was very sticky.

Scritto da: PC

Not the best quality

Doesnt adhere to most usual materials. Looks like it have too many additives among the epoxy itself.

Scritto da: Tickles

It worked.

Our depth sounder sprung a leak. I dove underwater to apply it. It did work; but wasn't easy holding my breath, with limited time and poor visibility, trying to speckled it to the bottom of the boat. First few trys weren't working; later, I applied more with force, made sure that I pushed it into all the cracks and grooves, it worked.

Scritto da: Ron

Good stuff

Really good stuff in use it for lots of stuff and I love it.

Scritto da: Runners

Works!

As stated this stuff is handy and it works great.

Scritto da: Meg

Gnome repair

I used it to repair some old gnomes that had cracks and missing pieces like the nose etc. It worked really well in filling in the holes and moulding them a new nose and I was able to paint over it no problem. I was worried about messing up the mixing process but it turned out good it wasn't a problem.

Scritto da: Susan Dring

Foes the job.

Did what I wanted it to.

Scritto da: Scotty

Nice thick epoxy that doesn't drip.

I used this for fixing my reel seat on to my fishing rod, I like that it is a paste and does not drip.

Scritto da: graham fisk

Bit of a drip

Still got the original leak, not as waterproof as claimed

Scritto da: devaka ekanayake

Good strength

All good. The end product colour is a blueish white. I wish it was pure white.