Prime-Line GD 12315 garāžas durvju vērpes atspere, 0,207 collas x 2 collas x 20 collas, oranža, labās puses vējš 20 collas, melns

Brand:PRIME-LINE

3.6/5

109.18

Šī vērpes atspere ir izgatavota no tērauda, ​​un tajā ir stacionārs konuss un tinuma konuss, kas piestiprināts atsperes pretējiem galiem. Šāda veida vērpes atsperes nodrošina celšanas spēku smagiem garāžas vārtiem, un tās jāizvēlas pēc atsperes izmēriem, nevis pēc durvju svara. Skatiet produkta specifikācijas ar ilustrācijām, kas atrodamas Prime-Line vērpes atsperu izvēles rokasgrāmatā, lai pārliecinātos, ka ir izvēlēta pareizā rezerves atspere. Divu atsperu uzstādīšanas gadījumā ņemiet vērā, ka ir obligāti pareizi jāizmanto LEFT WIND un RIGHT WIND atsperes. Turklāt, ja ir iesaistītas divu atsperu instalācijas, ir svarīgi nomainīt abas atsperes, jo, nomainot tikai 1 atsperi, var palielināties spriedze vecākajai nenomainītajai atsperei. Šī vērpes atspere ir regulāra darba atspere, kuras paredzamais kalpošanas laiks ir 10 000 ciklu. Svarīgs drošības pasākums: visa bojātā vai nepareizi funkcionējošā aparatūra ir jāaizstāj ar atbilstošu aparatūru, neveicot nekādas izmaiņas. Šīs garāžas durvju vērpes atsperes var izraisīt nopietnus savainojumus, ja tās netiek pareizi apstrādātas un uzstādītas. Ja mēģināt pats nomainīt vērpes atsperes, ir svarīgi, lai vērpes atsperu noņemšana vai regulēšana netiktu veikta ar citu instrumentu, izņemot Prime-Line preces numuru GD-52238. Ja šo atsperu nomaiņai neizmantojat Prime-Line preces numuru GD-52238, var tikt gūti smagi miesas bojājumi. Šie tinumu stieņi tiek izmantoti, lai uztītu un atvienotu vērpes atsperu spriegojumu, un tie ir vienīgie šim nolūkam ieteicamie instrumenti. Piezīme: Lai noteiktu vērpes pavasara vēja virzību, apskatiet atsperes galu ar atsperes “pirkstu” vēja augšpusē. Kad pavasara beigas ir 12:00 bieži pulkstenis un tas ir vērsts uz kreiso pusi, pavasaris ir labais vējš; ja atsperes gals norāda uz labo pusi (novietots 12:00 bieži.pulkstenis) tas ir kreisais vējš. Stāvot garāžā, skatoties ārpusē, vērpes atspere ar melni krāsotu tinuma konusu tiek uzstādīta durvju labajā pusē, bet vērpes atspere ar sarkani krāsotu tinuma konusu tiek uzstādīta durvju kreisajā pusē.

Labās puses atsperes ir uzstādītas centra kreisajā pusē, bet kreisās puses atsperes ir uzstādītas centra labajā pusē (garāžas iekšpusē, skatoties uz āru). Pavasarī ietilpst stacionāri un tinumu konusi. Aizstāšanai nepieciešams izmantot/iegādāties preces Nr. GD-52238 un skaidra izpratne par stieples izmēru un nodošanu. Ja ir izmantotas divu atsperu instalācijas, viena un tā paša darba laikā ir svarīgi pareizi uzstādīt gan KREISĀ, gan LABĀ VĒJA ATSPARES. 0,207 collu stieples izmērs x 2 collas iekšējais izmērs x 20 collas garums ar oranžas krāsas kodu. Šo labās puses vērpes atsperi izmanto salūzušo garāžas durvju atsperu nomaiņai. 2 collas iekšējais diametrs. Labās puses vēja atsperes ir uzstādītas pa kreisi no centra (skatoties no garāžas iekšpuses, skatoties uz āru). Pavasarī ir iekļauti stacionāri un tinumu konusi, nomaiņai nepieciešams izmantot/iegādāties Prime-Line daļu GD-52238 un skaidru izpratni par stieples izmēru un nodošanu. Ja ir izmantotas divu atsperu instalācijas, viena un tā paša darba laikā ir svarīgi pareizi uzstādīt gan kreiso, gan labo vēja atsperes. 0,207 collu stieples izmērs x 2 collas iekšējais izmērs x 20 collas garums ar oranžas krāsas kodu. Izmanto dažādi garāžu durvju ražotāji.
Assembled Diameter ‎2 Inches
Batteries Included? ‎No
Batteries Required? ‎No
color Black
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 371 ratings 4.5 out of 5 stars
Cutting Diameter ‎2 Inches
Included Components ‎Torsion spring
Item model number ‎GD 12315
Item Package Quantity ‎1
Item Weight ‎0.01 ounces
Manufacturer ‎Prime-Line Products
Part Number ‎GD 12315
Product Dimensions ‎20 x 2.41 x 2.41 inches
Size ‎20 in.
Warranty Description ‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

3.6

13 Review
5 Star
76
4 Star
12
3 Star
3
2 Star
4
1 Star
5

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Jr.
Exact Replacement Left-Hand Spring for 7ft Garage Door
This is the exact replacement Left-Hand torsion spring for my 7ft garage door. It has the exact identical specifications as the old one – (.250 inch x 2 inch x 32 inch). This is the “Left-Hand wind” spring, which is the one on the right side if you’re looking at both springs from the inside and standing under the garage door opener. Comparing the build quality to the one being replaced that's over 15 years old, this Prime-Line spring just looks and feels of a far better product overall and should last just as long, if not longer. For the DIY savvy replacing a garage door torsion spring can take time but isn’t as hard. Understanding the process and exercising caution especially winding the springs is a must, as well as using the right tools for the job. For the non or limited DIY savvy folks, replacing such spring can be dangerous and isn’t a beginner’s project. It is best handled by professionals or more experienced individuals.
Scritto da: Al P
Easy to install if you have done it before.
Have needed to replace the broken spring for a long time. The new one was easy for me, because I used to do this for an old company that I worked for 12 years ago. (Dock Doors) you can get all the tools and parts off of Amazon. I replaced the rollers, cables, bottom brackets L/R, and the spring. I spray painted the horizontal line on the spring to count how many windings I put on the springs. All told it took me right around 3hrs to do all of this. (I'm 65 years old) This saved me a lot of $$$$$$ by not having to call a garage door company.
Scritto da: jknudse
The Spring is Not Coated
The spring installed as it should and was the correct dimensions. Be aware that this is a bare metal spring with no coating. Be sure you live in an environment that this won't become a problem.
Scritto da: Vyndictive
Replacement door spring without a service call
I bought these as they were the closest match to the springs that broke on my residential torsion spring garage door. My door is an insulated aluminum 4 panel door, 7' tall and 2 cars wide. I did buy the right hand wind spring to compliment this one because I did want to replace them in pairs. So, the spring itself was properly marked, it did have the indicator paint, and set screws. It had instructions taped to the spring with a table indicating how much lift each color could have, but fat load of good that does when clearly the spring has already arrived. It does not include any winding bars. So, installed these on 6/15/15 - they're stronger springs than I had before, so they required a bit less winding. The construction looks good and safe. I didn't notice any issues with the springs themselves upon installation. Some fiddling around, and I was able to repair my garage myself and get each spring set so it raises and lowers just fine. Now, these are prime - but it did take 4 days to reach me. That was 4 doors of not having my garage door work which very much upset me. Amazon gave me a $5 refund on the order, so $0.05 per hour that I couldn't use my garage. Thanks. . . But you can't fault the product for that. So, 4/5 stars right now because its too soon to say how durable they are. I would say 5, but because while it would be easy to include winding rods, they choose not to. Knowing they're selling through amazon which can be sold directly to the end user also. Maybe make it an option like sizing or something.
Scritto da: Mouse37
Perfect fit
Fast shipping perfect fit
Scritto da: Amazon Customer
This torsion spring is good
This torsion spring is good
Scritto da: Cristian
Failed after 3.5 years
Purchased in September 2019, failed in April 2023.
Scritto da: An Informed Buyer
Green = 120lbs each. Left wind = right side spring
Now my right side spring broke, so let me copy my review from the left spring over here, as it's the same product. The quality of the left spring has been good during the year I've installed it. Green color code on the spring means it supports 120lbs, or 240lbs if using double springs. Note that the picture is wrong, as it shows brown code on the spring. There's also a color code on the winding cone (not the spring) Red cone = Right wind = counter clockwise = Left side Black cone = Left wind = clockwise = Right side (picture is wrong again, as the code shown had red paint on the cone.) There are 2 ways to determine the correct spring, either by weighing the garage door or measuring the existing spring: By Weight: A double roll-up garage door is typically about 200-250lbs. There's a tutorial on the web showing how to weight it with a bathroom scale. By Measurement: need inside spring diameter, spring length and gauge. To measure gauge, get the length of 10 coils together. If it comes out to 2.5 inches exactly, then each coil is 0.25 inch.
Scritto da: Gerald B.
Good product. worked well.
Costs around $75.00 for the spring. You will also need to purchase two winding rods if you do not already have a set. Watch a few YouTube videos before attempting. Take your time and be careful.
Scritto da: florin
Good product
Did the job, easy enough to install.
Scritto da: RAFIL ALSAARTI
I do not recommend buying it, it broke an hour after installing it
The media could not be loaded.
Scritto da: SJ
Great buy
So happy to have done this myself. It was much easier than I thought and much cheaper than any contractor. Spring looks strong (time will tell if it lasts or not but very confident it will), and perfectly fit my 1 inch outside diameter bar and 3 ¼ inch bracket (center bolt). I would definitely buy again.
Scritto da: Fernando
Perefect replacement for my broken garage door spring
Perfect replacement for my broken garage door spring, easy to install and excellent quality. DO NOT CHEAP OUT ON YOUR SAFETY!!! BUY THE ADJUSTING RODS. Changing your garage door springs in not difficult but make sure you use the correct tools even if you are prob only going to use it once. If the rods you use snap or bend and spin back is could take out your eye or teeth..

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array